Top Belt Hole Punch Tool

Leather Hole Punch,Belt Hole Puncher Leather Punch Tool Leather Hole Punch for Belts Belt Hole Puncher for Leather Heavy Duty Suitable for Belts,Leather,Watches and Other Handicrafts.

  • Multi-function】: Belt hole puncher are often used for leather products such as belts,watch bands, fabrics,earrings and can also be used for DIY.....
  • Material】Leather punch tool are made of high-density carbon steel, durable and resistant to deformation. Chromium-plated surface to prevent....
  • Leather Punch Size】Leather hole punch adopts 6-level rotary round hole design, hole diameter: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm.The desired....
  • Ergonomic design】out of the original intention of labor-saving use, you don't need too much hand strength when punching, because the lever principle....
  • Simple operation】 If you are not familiar with the use of leather hole punch for belts, you can check out the operation video on our product details....
Check Stock

ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

  • ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
  • This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
  • EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
  • Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
  • The pin point is spring-loaded and retracts into handle when punching a hole.
  • Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
  • BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

Amazon Basics Leather Hole Punch Set, Rotary Puncher, Multi Hole Sizes Maker Tool

  • Rotary hole punch and sizing tool for working with leather materials and more.
  • Creates punch hole sizes including 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm,and 5mm.
  • Ideal for leather craft projects, creating belt holes, works with leather and cardboard. Not recommended for leather with thickness above 3 mm.
  • Drop forged, heat treated steel component construction with a chrome finish.
  • Contoured ergonomic handle offers a comfortable, textured grip and easy usability.
Check Stock

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

  • CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
  • COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
  • HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
  • EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
  • ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

NEIKO 02639A 6-Inch Automatic Center Hole Punch with Adjustable One-Handed Spring Impact Chrome-Plated Shank and Premium S2 Steel Tip

  • DRILL PUNCH TOOL: This 6-Inch Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners..
  • ADJUSTABLE HOLE-PUNCH TOOL: The spring-loaded center-punch design uses spring tension that can be modified and adjusted for light or heavy marking, punching, or staking. Change the strike force any time to match the surface you are working with..
  • QUALITY MATERIALS: With a chrome-plated shank body and a hardened S2 steel tip, this corrosion-resistant wood-and-metal punch tool can withstand high-impact punches and force. The knurled, nonslip cap gives you a firm one-handed grip on the tool..
  • EASY ONE-HANDED USE: This one-handed automatic center punch needs only your hands—no hammer required. Use the S2 tip on a sturdy surface to center where you want the starter hole, and punch the tool downward to create the drill marker..
  • COMPACT SIZE: This automatic one-hand punch is small enough to fit in any toolbox or pocket. Carry it with you from job to job for a convenient and easy starter drill bit. You can also use this as a spring-loaded glass breaker for emergencies..
Check Stock

Kanroot 41817 Double Pocket Pliers Top Grain Leather Holster

  • HEAVY DUTY PUNCHES: The General Tools rotary puncher is made of plated steel with a sharp circular knife-like edge for stronger punches. The pliers feature an asymmetric handle and ergonomic grip for superior comfort and control..
  • BELT HOLE PUNCHER: Our versatile gadget can also be used for making round holes in cardboard, denim, cloth, and canvas. The novel compound-joint design requires less effort than other hole punches do..
  • FABRIC HOLE CUTTER: Make little punches with a single-style force to your belt, purse or watch strap, pet collar, shoulder bag, or a DIY project. The hand tool is self-opening, revolving, and strong yet accessible and convenient for unisex use..
  • DIFFERENT SIZE HOLE PUNCHER: Learn the art of crafting with our non-clogging punch sizes ranging from 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16". This quality rotary tool is perfect for a home hobby or commercial use..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Watch Band Leather Hole Punch Plier Universal 2.0mm Hand Strap Wrist Belt Puncher Pliers Repair Tools Suitable for Belts Dog Collars Shoes DIY Home or Craft Projects

  • 【High Quality and Safety】The durable punch pliers that is high hardness, good toughness and durable..
  • 【Easy to Use】Heavy duty chrome plated watch band leather strap wrist watch strap belt hole tool punch plier with yellow vinyl grip for secure....
  • 【Multi-function】 Ideal for use on a variety of surfaces. It is an awesome tool. The punch plier is commonly used for punching round holes in....
  • 【Ergonomics Design】 The professional punch plier adopts double lever mechanism to greatly save your strength. do not require much strength to get....
  • 【Product Performance】The unique design of punch plier allows for use with one hand and gives you the ability to create stronger punches.
Check Stock

2 Pack Automatic Drill Center Punch,5 inch Brass Spring Loaded Crushing Hand Tool with Steel Center Hole Punch Marker Scriber for Wood Metal Plastic Awl Puncher with Cushion Cap and Adjustable Impact

  • Centre Punch with Blue caps:Made of high speed steel, that is resistant to heavy impact, wear resistant and rustproof to extend the punch life. high speed steel hardness: HRC58°~ 60°.The cushion cap of center punch is made of ABS rigid engineering plastics. The blue adjustable impact cap can be increased or decreased. The punch body has a deep knurled handle for easy handling and better one-hand control..
  • User Guide:Use the heavy head to mark the center of a hole you wish to create. Firmly press the handle and press it in the direction of the punch. After the punch is pressed back into the rod for a short period, the strong spring will vigorously eject the punch..
  • Centre Punch with Red Caps:The Center hole punch shank body is constructed from chrome-plated steel for maximum strength and longevity that allows for high impact force and resists corrosion.
  • Unique Design:Knurled non-slip surface on spring loaded nail punch shaft allows for comfortable work and reduced user fatigue while the precision centered tip increases control for more accurately placed holes..
  • Wide Application:Automatic Center Hole Punch is suitable for a variety of tasks, such as signs on materials, glass window breakers, awl for belt, mark on the wall and so on....
Check Stock

OWDEN Professional 13 Pcs Leather Hole Punch Set (Slim Style) 1.0-12MM for Leather Belt,Watch Band and Leather Strap Gasket. with a Free 3\ Nylon mat.

  • OWDEN Professional 13Pcs.leather hole punch set, The Tool has a slim design to better maintain the verticality and smooth for the leather hole..
  • Each hollow punch sizes:1.0mm,1.5mm,2.0mm,3.0mm,4.0mm,5.0mm,6.0mm,7.0mm,8.0mm,9.0mm,10mm,11mm,12mm. All hole size is very accurate..
  • These sizes are especially suitable for punching for leather belt, Watchband, Leather strap, And thin rubber, Plastic sheet,Canvas ,Clothing,Paper Etc..
  • The Leather hollow punch set with black finshed to avoid rust. Wipe with anti-rust oil after use..
  • Each product has a laser-marked OWDEN logo and size. Canvas pouch with a color box package. Trust OWDEN..
Check Stock

Leather Hole Punch,Belt Hole Puncher for Leather, Revolving Punch Plier Kit,Leather Punch Plier for Leather, Belts, Watches, Handbags, Leather Punch Tool for Belts Diameter : 4.5/4 /3.5/3/2.5/2mm.

  • Leather Punch Size】Belt hole puncher for leather machine adopts 6-stage rotation design,punching diameter: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm.The hole diameter is clearly marked on the wheels for quick and easy selection of the appropriate size.Make your favorite belt fit you again,it's fun!.
  • Multi-function】For serious craft enthusiasts,punching round holes in leather,,belts,fabrics,buttonholes and eyelets, rubber,silicone, cardboard,saddles and similar materials is a very simple task.In addition,the pliers are also suitable for bags, paper, cards, felt, tarpaulins, pet collars, saddles and horse rope etc..
  • Ergonomic design】The professional leather puncher adopts a compound leverage. You don't need too much hand strength, because the double rod reduces the pressure, thereby protecting the fatigue of the wrist. In addition, belt puncher for leather have non-slip and environmentally friendly handles, which are comfortable and very suitable for long-term and repetitive work. And the punch plier will become small to save your space..
  • Perfect burr-free holes】The screw punch is made of high-quality manganese steel, which is hard and durable, and the unit weight: 17oz.Leather punch tool for belts includes a brass pad, small screwdriver, ruler to m....
Check Stock