Top Belt Tensioner Pulley Installer Tool

3458 A/C Belt Installation Tool Compatible with BMW V8 N62 Engines - BMW Power Steering Pump Drive Belt Tool Same as OEM 641040 & 8380049451

  • 【Fit For】Compatible with BMW N62 (V8) Motors in 2004 through 2006 models with the stretch belt..
  • 【Perfect Design】This BMW A/C Belt Installation Tool is crafted for utilization when no belt tensioner is employed on 2004 to 2006 V8 N62 engines with stretch belts..
  • 【Easy Installation】Easy to installation ,Without this tool, its almost impossible to mount the AC belt. With this tools very easy to install AC belt. install it only took less than five minutes..
  • 【Perfect Tool】The perfect tool for the job of installing BMW A/C belts , if you need to install the A/C belt on your BMW, you need this tool.Tool is a must have if putting a belt on that has no spring assist. Any other way could cause damage to actual pulley..
  • 【Package Included】1* A/C Belt Installation Tool for BMW.
Check Stock

BILITOOLS 15-Piece Universal Serpentine Belt Tool Set, Ratcheting Serpentine Belt Tensioner Tool Kit

  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case..
  • Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
  • Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
  • Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
  • Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..
Check Stock

TUCAREST 39155 (For V6 3.5L Only) Accessory Drive Belt Tensioner Pulley Assembly Compatible With 2007-2012 Nissan Altima /2009-2014 Maxima Murano /2011-2012 Quest [# 11955JA10A 11955JA10C]

  • Premium Quality:Made following stringent OE specifications by an OE manufacturer.Each tensioner undergo strict quality control not just before shipping but throughout the production process.During each step of production multiple quality control checks are performed to ensure a long,Trouble-free service life..
  • Perfect Fit:Engineered and tested to match the fit,function and performance of the original tensioner on specified vehicles.It ensures proper belt tension, alignment, and damping for superior performance.Easy to install by direct replacement..
  • Upgraded Durability: Made from high-quality materials for ultimate durability.Torsional round spring design provides reliability as well as consistent tension,eliminate noisy tensioner pulley and no more belt noise..
  • Cost-effective:We are a factory direct sales,Saving your cost.Customers can spend a small amount of money and get high quality Brand new Accessory Drive Belt Tensioner Pulley Assembly and Professional after-sales service..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter S....
Check Stock

Genuine OEM Subaru Timing Belt Ten Kit Outback Baja Legacy 2.5 SOHC 2000-2009

  • Need a Genuine Subaru Timing Belt Kit for your 2000-2009 Subaru Legacy Outback or Baja sohc 2.5..
  • Timing Belt 13028AA21B X1 Tensioner 13033AA042 X 1.
  • Lip Idler Pulley 13073AA190 X1 Idler Pulley 13073AA142 X1.
  • 2000-2009 Outback and Legacy & Baja (non turbo).
Check Stock

Aeromotive 21102 Alternator 32% Overdrive Pulley, Billet, (Serpentine Belt), Ford & GM

  • Fitted with a high quality NTN/NSK Japanese bearing.
  • Replacement of failed original A/C belt tensioner pulley instantly resolves worn bearing squeal and vibration.
  • Manufactured to OE pulley dimensions for proper clearances and belt alignment.
  • High-strength alloy or composite construction withstands intense engine heat and A/C compressor vibration.
Check Stock

ICT Billet LS Truck 6 Rib LSA Supercharger Tensioner/Idler Bracket Kit LQ4 LSX 5.3L 6.0L 551789-3

  • Compatible With Truck SUV or LS3 L99 Camaro Crank Pulley.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Compatible with a factory LSA 8 rib Supercharger Belt Tensioner.
  • Includes: idler / tensioner base brackets, idler pulley, and mounting hardware.
  • Compatible with ICT Billet LSA truck or Trailblazer SS alternator and power steering bracket kit.
Check Stock

ICT Billet A/C Air Conditioner Compressor Bracket Kit Compatible with Sanden 508 LS Camaro SUV LSX AC LS1 LM7 LR4 LQ4 L59 LQ9 LM4 L33 L92 L76 LY2 LY5 LY6 LC9 LH8 LMG L98 L99 L96 LC8 551494X-2

  • Use this bracket to install a Sanden 508 A/C Compressor on your LS engine up out of the way of frame rails, motor mounts and fenderwells, using a factory LS1 belt tensioner.
  • This kit uses Truck-Spacing, which is ONLY Compatible with GM-12553118 crank pulley. It also utilizes a '98-'02 Camaro LS1 belt tensioner GM-12560344..
  • Made in Wichita, KS from aerospace grade, USA billet aluminum.
  • Compatible with Sanden 508 compressor from 1987 Jeep Cherokee (57580), as well as Vintage Air Sanden 508.
  • Bracket kit includes: satin finish bracket set, ribbed idler pulley, smooth tensioner PULLEY ONLY, and mounting hardware.
Check Stock

ICT Billet A/C Air Conditioner Compressor Bracket Kit for LS Truck SUV Compatible with Sanden 508 LSX AC LS1 LM7 LR4 LQ4 L59 LQ9 LM4 L33 L92 L76 LY2 LY5 LY6 LC9 LH8 LMG L98 L99 L96 LC8 551494X-3

  • Bracket kit Compatible with Sanden 508 A/C Compressor on your LS engine up out of the way of frame rails, motor mounts and fenderwells, using a factory LS belt tensioner..
  • This kit uses Truck-Spacing, which is ONLY Compatible with a GM crank pulley. It also utilizes a '98-'02 Camaro LS1 belt tensioner GM.
  • Made in Wichita, KS from aerospace grade, USA billet aluminum.
  • Compatible with Sanden 508 compressor from 1987 Jeep Cherokee , as well as Vintage Air Sanden 508.
  • Bracket kit includes: satin finish bracket set, ribbed idler pulley, smooth tensioner PULLEY ONLY, and mounting hardware.
Check Stock

ATPPCCE 39054 Belt Tensioner Assembly With Pulley For Honda Civic 2006-2011 4-Cyl. 1.8 L OE# 89600 39077 31170RWK005 31170RWK025 31170-RNA-A01 31170-RNA-A02 31170- RWK-015

  • Belt tensioner Fits For:Honda Civic 2006-2011 4-Cyl. 1.8 L.
  • OEM part numbers:39054 89600 39077 31170-RWK-005 31170-RWK-025 31170RNAA01 31170RNAA02 31170RWK015.
  • The replacement automatic serpentine belt tensioner pulley assembly transports power to the alternator,power steering pump,air conditioning and keeps it running smoothly and effectively.It is designed for vehicles that needs an automatic belt tensioner.The torsional round spring design provides consistent tension for maximum durability.
  • Belts、tensioners and idler pulleys are designed to the same life cycle，when one of them is replaced,the othes had likely met their design cycle as well, so it is recommended to replace all of them when replacing one of the parts just wanna avoid to having the influences of other accessories'service life.
  • For more detailed assembly information, check out our instruction section. If there is any problem with our belt tensioner assembly, please feel free to contact us and we will solve it for you in time.
Check Stock

TUUMOND 38158 Automatic Belt Tensioner Compatible With 2004-2006 Buick Rainier 2002-2007 Cadillac Escalade 2003-2007 Cadillac Escalade ESV 2002-2007 Cadillac Escalade EXT 2007 Chevrolet Avalanche

  • ·Fitment: Compatible with BUICK Rainier.
  • Cadillac Escalade, Avalanche, Express, Silverado, Suburban, Tahoe,Trailblazer.
  • GMCEnvoy, Savana, Sierra, Yukon, Hummer, Saab. For more detailed information , please check our description section..
  • ·OE Standard: This 38159 belt tensioner with pulley assembly can be directly replaced for a proper fit. Solid steel construction with highly resistant to heat and shock, ensuring engine components' proper functioning..
  • ·High-performance: Torsional round spring design provides consistent tension and does not allow contamination for enhanced durability. Damping system increases tensioner, belt, and accessory component life for long lasting use..
  • ·Please contact us if you have any problem about this drive belt tensioner assembly ..
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

URO Parts 06F903315P Acc Belt Tensioner Pulley

  • Manufactured to OE tensioner pulley dimensions for proper clearances and belt alignment.
  • High-strength alloy or composite pulley construction withstands brutal engine heat and vibration.
  • Durable surface coating resists corrosion (metal models).
Check Stock