Top Bend Pipes

32 Pieces Bike Brake Noodle Cable Bicycle Cycling Brake Pipe with Rubber Boots for Mountain Bike Bicycle Accessories

  • Package includes: you will receive 8 sets of bike brake noodle cables, each set contains 1 piece 90 degree bend pipe, 1 piece 110 bend pipe and 2 pieces rubber boots, a total of 32 pieces, enough to meet your long-term using needs.
  • Good performance: these brake pipes with rubber boots will reduce the friction and resistance of the brake wire, so as to protects the brake wire for serving you a long range of time.
  • Durable material: our bicycle cycling brake pipes with rubber boots are made of sturdy stainless steel, aluminum alloy and durable rubber, which is not easy to damage in long-term friction, durable and reliable for you to use.
  • Wide range of application: these bike brake noodle cables can be applied for most types of bicycles and mountain bikes, provides you with nice using experience.
  • Easy to carry: our cycling brake pipe with rubber boots features lightweight characteristics, which makes it easy to carry and store.
Check Stock

DNA MOTORING ZTL-30RAW 16 Pcs 3 Inches Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & U Bend Tube Kit,Universal Fit

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DNA MOTORING ZTL-25SS-8P 8 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabricatio.
  • Universal Kit: 2pcs 48" Straight Pipes, 2pcs 90 Degree Pipes, 2pcs 45 Degree Pipes, 2pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

liboyixi Drain Clog Remover,3Pack20\ & 3Pack25\ Round Sink Snake Hair Removal Tool Drain Auger Drain Cleaner Plumbing Snake for Kitchen Sink, snake drain Bathtub, Toilet and Shower

  • Packing specification: 6 packs (3 orange25-Inch + 3 green20-Inch ,1 pack of pipe sealing plugs)soft and durable design enables its reuse for many times..
  • Materials: made of plastic material which makes it more flexible to bend into different shapes and insert into small strainers or pipes for cleaning..
  • Easy operate：just insert, spin, remove clog. Work for most bathroom drains without disassembling the drain stopper.
  • Loop Design: Flexible Barbed wand,Soft enough to bend in many kinds of strainers and pipes, the flexible barbed wand could easy to hook the hair and debris.
  • Wide Application: Great drain tool for kitchen sink, toilets, washbasin, bathtubs, and sewers，flexes at P-trap where most clogs occurred，and safer than bad-smelling chemical drainage cleaner..
Check Stock

DNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Specification: 18-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5" OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DOBTIM Pipe Insulation Foam Wrap Tape, self Adhesive with high Resilience for Pipe Insulation Wrap 13 Ft Long x 3 Inch Wide x 1/2 Inch Thick

  • GOOD PERFORMANCE- High stability and resilience, adhesive strength.flexible and durable excellent tightness and deformation resistance feature. resistance of flame, vapor, moisture, weather, cold, heat, oil, smoke and etc..
  • STRONG ADHESIVE- Cell foam insulates and protects pipes, reduces energy loss.The foam insulation tape has strong adhesive backing, can stick firmly, please clean the surface before use..
  • EASY TO INSTALL- Easy to remove without any residue, cut, tear and peel.you can cut the size with scissors or blade and bend in any shape. Adjustable and long-lasting with heavy-duty..
  • VERSATILE USE- Foam tape pipe insulation locks in heat and reduces wasteful heat radiation loss on hot water pipes, Helps keep cold water pipes from moisture and condensation build up..
  • WHAT YOU GET- Product measures at 13 Ft Long x 2 Inch Wide x 1/2 Inch thick, foam insulation wrap tape insulation wrap is easy to use and install.1/2 Inch thick vapor barrier stops moisture leaks and build up on your pipes..
Check Stock

Simpson Strong-Tie PGT2 12-Gauge ZMAX Galvanized Pipe Grip Tie for 2 in. Pipe

  • Install on 2 in. (2-3/8 in. outside diameter) vertical pipes, offsetting corners to allow for the correct rail alignment.
  • Field-bend PGT flanges to fit corner and angled conditions (bend one time only).
  • Galvanized (G90) for extra corrosion resistance.
Check Stock

Drain Cleaner and Cleaning Tool by Green-world - Set of 3 Hair Drain Clog Remover and Removal Opener Sink and Bathtub, Toilet - Hook Catcher Unclogger and Auger Plumbing

  • Soft & Flexible Barbed wand：3 Pack Orange 25 Inch Soft enough to bend in many kinds of strainers and snake Drain pipes, the The width of the hair cleaner is 0.45″, please make sure your sink hole is larger than 0.5″ before purchasing..
  • HIGH QUALITY & REUSABLE: New upgraded durable modified polypropylene, high flexible, not easy to snap or break for unclogging shower and sink drains, flexes at P-trap where most clogs occurred.
  • Easy operate：just insert, spin, remove clog. More environmental and less expensive than toxic chemical drain cleaners.
  • Great Value: Meets your need to easily remove hair and other obstructions. You will no longer have to pay for expensive plumbing cleaning services while being cheaper, healthier and safer than toxic chemical cleaners..
  • Safe and Wide Application: Soft enough to bend in many kinds of strainers and pipes, great for kitchen, bathroom & utility sinks, bathtubs and showers.
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
  • 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock

1.5 Inch PVC Pipe Reamer, Plumbing Fitting Saver Bit Socket Saver Bit for Removing SCH 40 from Hub Practical Plumbing Tools for PVC Pipe Compatible with 1\\/2 Speed Power Drills

  • Package Content: You will receive a socket saver for removing SCH 40 from a hub and suitable for 1/2 inch variable speed drills. It can easily cut various plastic pipes, such as ABS, PVC and DWV pipes..
  • Premium Material: Our inside pipe cutter for PVC pipe is made of high quality stainless steel, sturdy enough and durable, not easy to break or bend. You can use it with confidence..
  • Practical: You only need to cut the broken part of pipes with our plumbing tools. No need to replace the whole pipe, thus it can save your time and energy to repair broken pipes. Very practical..
  • Easy to Use: You just need to install the socket saver on your power drills, then place it in the pipe and start to drill, lastly clean the inside of pipe and connect with new pipe connector..
  • Important Tips: Please ensure the size of our product to match your power drills before ordering. Sharp pipe reamer should be away from kids to prevent accidental injuries..
Check Stock