Top Bending Conduit

Klein Tools 935AB4V Level, 6.25-Inch Magnetic Torpedo Level is a Conduit Level with 4 Vials, V-Groove and Magnet Track, High Viz Orange

  • Level with patented magnet track prevents powerful Rare-Earth magnets from falling out.
  • Thumb screw attaches level to conduit to measure angle while bending.
  • Large, easy-to-read high-visibility vials at 4 angles: level, 90, 45, and 30 degrees.
  • Large top-view vial windows enable easy readability from multiple angles.
  • High-visibility orange professional grade billet aluminum body is easy to see on conduit and at the jobsite.
  • V-Groove fits contour of conduit and pipe.
Check Stock

M40 1 1/2 Inch Stainless Steel Rigid Pipe Hole Strap,with 2 Holes Cable U Bracket Clamp Hanger，Heavy Duty Rigid Pipe Strap Clamp 30 PCS

  • 【Material】Made of 304 stainless steel. After punching, bending, and integral molding, the reinforcing rib structure is added to improve the....
  • 【Secure Conduit】Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for....
  • 【Reinforcing Rib Design】The middle part is prominent, larger load bearing, to make pipe strap not easily to deformed during using..
  • 【Application】Pipe clamps use to secure rigid or IMC conduit to wood, masonry, widely used in fixed pipeline such as stainless steel pipes, rubber....
  • 【Easy to Install】 Two Holes u bracket easily secure piping to studs or joists to reduce vibration noise, great improves its safety.
Check Stock

TOOLIOM Digital Angle Finder with Dual Electronic Laser 4-side Strong Magnetic Angle Gauge Rechargeable Digital Level Tool with Type-C Charging Port for Woodworking and Building

  • 3 Functions in 1 Unit : Digital electronic level with dual laser can be used as measure angle, check relative angles, and laser level..
  • 360°Measuring Range : Can be measured on all four sides, provide easy use at woodworking, bending conduit, etc. Auto-rotates when upside-down for easy read.
  • Dual Lasers : It is great helper for horizontal and symmetrical installation. Widely used in measuring, leveling in woodworking renovations and building furniture..
  • Zero Calibration : Feature No need to add and subtract again on the tilt angle, more convenient for relative angle measurement..
  • Magnet on 4 Sides : Can attach to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces..
Check Stock

Gardner Bender B1000 Portable Cyclone Conduit Bender

  • Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
  • Attaches to almost any pipe threader to use as a bending power source.
  • Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.
  • 1 shoe for all sizes – no spare parts to carry around.
Check Stock

Zhangxin Brass Sheet Roll Brass Strip High Purity Gold Film Brass Foil Copper Sheet,Thickness 0.3mm,50x1000mm

  • Material: H62 brass Sheet. High strength, good plasticity, good weldability, corrosion resistance..
  • Has strong wear resistance, high strength, hardness, corrosion resistance, good machinability, easy welding, Suitable for manufacture all kinds of deep drawing and bending force components..
  • Material properties: hot processing temperature is 750-830 degree.
  • The annealing temperature is 520-650 degree.
  • The low temperature annealing temperature for eliminating internal stress is 260-270 degree..
  • It is one of the widely used ordinary brass varieties. Used for the loaded parts made of a variety of deep stretching and bending stress such as pin, rivets, washers, nuts, conduit, barometer spring, screen mesh, radiator parts,etc..
  • Package included: 1 x Brass Foil Copper Sheet.
Check Stock

VEVOR Fish Tape Fiberglass (6MM 425FT)

  • 【DURABLE STEEL REEL STAND】 - The bracket is welded by high-quality steel, sturdy and durable, with functional compression resistance capacity. It is non-conductive, rust-, and corrosion-resistant..
  • 【6 MM PIPELINE】- Cable length: 130 m/426.5 ft.
  • Cable density: >150 g/m. The guiding line is made of epoxy fiberglass (Inner) and high-density polyethylene (Outer), able to keep its shape under the pressure of 10KN..
  • 【STRONG BENDING PROPERTY】- The minimum bending radius: 12 inch/300 mm. It is firm enough to push through walls and ceilings. The bracket is designed with a brake level for controlling the speed..
  • 【COMPACT & PORTABLE】 - The fiberglass wire cable is compact, light-weight, and movable. It is easy to carry with a top handle for moving freely. It has the advantages of time-saving, labor-saving, improved work efficiency, etc..
  • 【VARIOUS APPLICATIONS】- The fish tape is perfect for use in telecommunication, electrical, wall and floor conduit, walker duct, and utility installations, suits for your different needs..
Check Stock

Gardner Bender B1000PT PORTABLE CYCLONE AND POWER DRIVER KIT

  • Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
  • Attaches to almost any pipe threader to use as a bending power source.
  • Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.
Check Stock

Angle Finder, WIBENTL 3 in 1 Line Digital Level Tool, Woodworking Tools, 4-Side Magnets Miter Saw Protractor, Electronic Level, Measures & Sets Angles, Hanging Pictures, Carpenters, Class II/ WB01

  • Small and Portable - Small and easy to carry. Save time and effort hanging decorations. Dual lasers are great helper for horizontal and symmetrical installation. Laser Power:.
  • Craftsman's Choice - Not only the baseboard, but also the strong magnetic upgrade at the four sides. Can attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces..
  • Easy Work & Rechargeable - This woodworking tools is rechargeable and comes with a type-c charging cable. 4 sides 0 to 90°measurement ranges provide easy use at woodworking, bending conduit, etc..
  • Dust & Water Resistant - IP54 rated dust and water resistant. Data is easy to view, for improved visibility in dimly lit work environments..
  • Auto-rotates & Data Lock - Auto-rotates when upside-down for easy viewin. With hold button to save the measured value..
Check Stock

Toledo Pipe 425 Stand Portable Tripod Chain Vise works with RIDGID 12R 700 Pipe Threader

  • Toledo Pipe Tools is proud to give you a high quality alternative to the big brands..
  • Large Aluminum Top Plate for more working area, 1/2" shoes for bending pipe or conduit.
  • Comfortable carrying hanlde for transportation.
  • Works with RIDGID 12R Ratchet Threader and RIDGID 700 Power Drive.
  • Lightweight (29 .lbs), Large Rubber foot skid plates for slip resistance.
Check Stock

Toledo Pipe BC 610 fits RIDGID 40210 Heavier Duty Screw Bench Chain Vise BC 510

  • Toledo Pipe Tools is proud to give you a high quality alternative to the big brands..
  • Easily and quickly be mounted to any secure surface like a workbench, truck, or to a tripod stand.
  • Pipe Capacity: 1/8" - 6", 1/2" shoes for bending pipe or conduit.
  • Easily mount to any secure surface, Replaceable Jaws.
  • Works with RIDGID 12R Ratchet Threader and RIDGID 700 Power Drive.
Check Stock

WORKPRO Torpedo Level, Magnetic, Verti. Site 4 Vial for Conduit Bending, Aluminum Alloy Construction, 6-1/2 inch

  • Easy-to-read high-visibility bubbles at 4 angles: level, 90, 45, and 30 degrees.
  • Verti.site view enables easy readability from multiple angles: front,back or top.
  • Aluminum body construction with anodized grit blasting for durability and strength.
  • Thumb screw attaches level to conduit to measure angle while bending.
  • Magnets provides superior holding strength, secures the torpedo level to the metal surface.
Check Stock

VEVOR Pipe Tube Bender, 9 Round and 8 Square Die Set Electric Pipe Tube Bender 1.5KW Multi-function Electric Pipe Bender

  • Copper Coils Motor: High conductivity of copper means that components can be made smaller and kept closer together, ensuring much higher efficiency. Power: 1500 W, Voltage: 110 V, Rotary Speed: 1400 RPM..
  • Adjustable Bending Radian:This exhaust pipe bender features a high-quality and flexible upper shaft, which can help bend pipes to any radian required..
  • High-Accuracy Die Sets:This pipe bender comes with 9 round die set & 8 square die set, high precision, and super-sturdy. Round Formers(in): 5/8"~3".
  • Reinforced Chain Design:Thickened and widened anti-rust chain can extend this conduit bender's operating life to a large extent..
  • Simple & Safe Operation:The tube bending machine uses a turbo reducer to drive, rolls and bends back and forth, simple to operate, with full cover design, much safer, ideal for construction and decoration business..
Check Stock