Top Benz 38pin Breakout Box

OLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue

  • Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
  • The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
  • Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
  • Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
  • Package Include:Standard 16Pin Male Plug x 1.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

uxcell 38 Pin to 16 Pin OBDII OBD2 Diagnostic Adapter Connector Cable Tool for Reading Diagnostics Info from Scanner for Mercedes-Benz

  • [Fitment] For Mercedes-Benz 38 Pin male to 16 Pin OBD2 female connector..
  • [Function] The function of the cable is connected to OBD diagnostic scanner, it can read real time engine data, such as speed, RPM, temperature, O2 sensor data, emissions, voltage, etc. That is convenient for your car driving..
  • [Feature] This is a brand new data link cable, used specifically for connecting your OBD2 scanner. Attention: this item is just an adapter, not a scanner..
  • [Easy installation] Durable and waterproof, convenient to use, plug and play..
  • [Durable Material] The cable adapter is made of plastic and metal, corrosion resistant, heat resistant and long service life..
Check Stock

Digital Music Changer Player Media CD Changer MP3 for Honda Goldwing 1800 GL1800 2001-2015

  • Decode for Bose Harman Kardon with optical interface. This optic fiber decoder box will keep your original car's optical fiber amplifier or sound sytem(for Harmon Kardon or for Bose) work..
  • It is compatiable with android radio and window CE stereo for Porsche 911(2005-2012), for Porsche boxster(2005-2012),for Porsche cayman(2004-2012)..
  • The MOST box is for Mercedes-Benz ML(2005-2011), for Mercedes-Benz GL(2005-2011), for Mercedes-Benz R(2005-2011), for Mercedes-Benz E(2009-2012), for Mercedes-Benz CLS(2009-2012), for Mercedes-Benz SLK(2009-2012)..
  • If your above compatible vehicle has the factory navigation or amplifier system (for JBL BOSE Harman Kardon, etc.) installed, you need bypass these amplifier with the fiber optic decoder..
  • Reduce installation fee,easy to install. All cables just need to be connected in front..
Check Stock

GeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header

  • Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
  • Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
  • Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
  • For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
  • Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

3-Pack ESP8266 Development Board, Aideepen ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E NODEMCU V2

  • 【ESP8266 ESP-12E】This esp8266 breakout board can fully compatible with ESP8266 ESP-12E..
  • 【Expansion Board】This expansion board can expand one GPIO pin of ESP8266 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
  • 【Ease to Use】Needn't welding components.These boards fit your ESP8266 ESP-12E perfectly,can be inserted into the sockets with minor effort by hand..
  • 【Good quality】This ESP8266 Breakout Board is design with double-layer that One pin is wired on both sides. Great contact and stable signal transmission to your ESP8266 board..
  • 【Why choose us】Aideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us..
Check Stock

S-Union [8PCS] New 16AWG 6Pin PCI-E to 8 6+2 pin Cable 27.5 Inch 70CM Length PCI 6Pin Male to Male Cable for GPU/PSU Breakout Board GPU Ethereum ETH Mining Power Supply with 5 Nylon Cable Ties

  • 【Item】PCI-E 6Pin to 8 (6+2) pin Male to Male Cable.
  • 【Safety】This item is 16 AWG wire，Able to withstand greater current and high power appliances.
  • 【Feature】The line is 27.5 inch (70CM) long, easy to use and connect.
  • 【Compatibility】This item is Compatible with Graphics Video Card, GPU breakout board,GPU Mining Power Supply, for GPU breakout board Search:....
  • 【What You Get And Shipping】8 x PCIe 6Pin to 6+2 Pin Male to Male Cable & 5x Nylon Cable Ties. SHIPPED FROM THE U.S. Delivery time takes about 2-5....
Check Stock

Programming The Raspberry Pi Pico In C

  • Compatible with Raspberry Pi Model 4/3B/Zero 1.3/2B/B+/A+ GPIO.
  • Use your RPi 4/3/Zero/2/B+/A+ with prototypes consisting of a 40-pin breakout.
  • 8"(20cm) cable length, dark grey color, NELTRON cable.
Check Stock

Electronics-Salon 24/20-pin ATX DC Power Supply Breakout Board Module.

  • Electronics-Salon 24/20-pins ATX DC Power Supply Breakout Board..
  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header..
  • With latching button switch to control power ON/OFF..
  • High quality 24Amp(per position) screw terminal blocks..
Check Stock

Yoper Bluetooth Kit Compatible with Mercedes-Benz MMI Car Interface Adapter iPhone Android iPod Integration Music AUX Connector

  • Use Instruction（Compatible with Mercedes-Benz car Only）: put the plug into the MMI port (Ｖery Important: please confirm your car have MMI Interface like picture show, it is a rectangular socket hole, not is a ipod pin plug or HIM port) then activate the AUX mode in the MMI system of your vehicle and pair it with your Android, iPhone, iPad or iPod touch via Bluetooth to play music (Note: MMI socket usually in the glove box).
  • Blue LED Light Up: bluetooth mode（USB port charging function off）, you can only change songs from the smartphone, can not control over music from the iDrive system , the playlist will not be displayed on the car screen.
  • Red LED Light Up: USB mode（Bluetooth transmission function off）, you can charge your device, or use the U Disk to listen music (Note: U Disk must is FAT32 formt, suggest under 32G. there are few MMI system don't support U Disk function, if not fit, please contact with us to solve the issues).
  • Vehicle compatibility: Compatible with Mercedes-Benz A-Class W169 C169.
  • SLK-Class R171 C639 NCV2 Vito.( Note: The detail compatibility of Month/Year please....
Check Stock

Adafruit ItsyBitsy M4 Express Featuring ATSAMD51

  • The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
  • This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
  • Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
  • There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..
Check Stock