Top Bessey Parallel Clamps 3inch

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

Pony Tools 3202-HT 6 Pack 2in. Spring Clamp, Orange

  • These Pony Spring Clamps are perfect for gluing models, crafts, and other projects that require one-handed clamping.
  • The instant opening and closing feature allows you to apply and remove them from your work quickly.
  • Soft, pivoting jaw pads keep work pieces protected and allow the clamps to hold oddly-shaped objects more easily.
  • The jaws and handles are made with glass filled nylon and the heavy-duty tempered steel spring allows pressure adjustments to be made from 1 to 50 pounds of clamping force.
  • Handle contours enable comfortable use. Non-slip jaws become parallel at maximum opening capacities.
Check Stock

HANZE 2 Pcs Butterfly Frame Hinge Clamp DIY Hobby Tool for Silk Screen Printing

  • ♚ Used for fixing screen version when printing . It can be fixed on any operation table, or it can be used to Make the operation table. It is easy and convenient to operate.
  • ♛ Easy to install.Take two points on the straight line, install the butterfly clips, and Install one or several pairs in parallel as needed..
  • ♜ Durable and rustproof.These clamps also feature positive locking for perfect registration..
  • ♝ For Starters, new beginners learn how to screen printing..
  • ♞ These clamps also feature positive locking for perfect registration with 4 screws..
Check Stock

WEIZE Trailer Jack Heavy Duty Swivel Boat Trailer Jack with Dual Wheels 10 Lift 1500 lbs

  • Weize trailer jack supports, lifts and lowers your boat or recreational trailer, lift capacity: 1500 lbs, 25-1/2" to 35-1/2".
  • Bolt-on installation - Fit for Mounting Plate width 4" to 5"(no more than the length of the bolt size M10*110MM) and vertically 4" height(3 holes for you to adjust, it is 2inch, 2 - 3inch, 3 - 4inch)..
  • Corrosion-resistant zinc finish prevents rust even in the harshest environment..
  • 6” diameter x 2" wide dual wheels provide support, stability and simple maneuverability..
  • The marine jack has a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use..
Check Stock

POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK

  • Includes: (two) piece 24-inch parallel jaw Clamp set.
  • Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier.
  • Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool.
  • 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement.
  • Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool.
Check Stock

EVIL ENERGY 3.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel

  • Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

EVIL ENERGY 2.5 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel

  • Size: Joins 2.5″ OD pipe to 2.5″ OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

JORGENSEN 8036 Cabinet Master 36 Inch 90 Degree Parallel Steel Bar Clamp

  • These 90-degree parallel steel bar clamps have more benefits and enhanced features than any clamp on the market today.
  • This product is easy to use easy to install and highly durable.
  • Multiple clutch disks are made from hardened and plated round edge high carbon steel to give greater support along the 1-3/16" x 3/8" steel bar.
  • Clamping faces are 3-3/4 inch height and 1-7/8 inch width.
  • Ideal for do-it-your-selfers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types.
  • Pony Tools Inc. (founded 1903) is the manufacturer of the bar clamps and they are made with U.S. and foreign parts in our Chicago factory.
Check Stock

EVIL ENERGY 2.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel

  • Size: Joins 2.0" OD pipe to 2.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

EVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel (2.75 Inch)

  • Size: Joins 2.75" OD pipe to 2.75" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

EVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.0 Inch,2Pcs

  • Size: Joins 2.0" OD pipe to 2.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

EVIL ENERGY Exhuast Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel (2.5 Inch,2Pcs)

  • Size: Joins 2.5" OD pipe to 2.5" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock