Top Best01tacoma Wheel Spacers

Readylift 66-5002 ReadyLift 2.0 Tall Rear Kit Silver

  • FITMENT: Lift kit for 2005 - 2019 Toyota Tacoma (2WD & 4WD). Does NOT fit 5-Lug or TRD Off-Road models. Simple installation in 2 to 4 hours for....
  • TACOMA SUSPENSION LIFT: This leveling kit will sustain your original ride quality with minimal effect on your truck’s center of gravity to maintain....
  • INCREASE GROUND CLEARANCE: Raise your Tacoma 3" in the front and 2" in the rear. Improve the look of your truck and increase ground clearance,....
  • ALL HARDWARE INCLUDED: Comes with 2 x 3" aircraft billet front strut spacers, 2 x 2" aircraft billet rear lift blocks, 4 extended zinc-plated U-bolts.....
  • TECHNICAL NOTES: Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry. Wheel alignment is recommended....
Check Stock

Abrillvt 5X115 Wheel Spacer 12mm 2PCS Wheel Adapter Compatible with for Century 90-05 for Park Avenue 00-05 for STS 05-08 for Allante 87-93

  • 5 LUG WHEEL SPACER ADAPTER FITMENTS -- WHEEL SPACERS 5X115 Fit for Vehicles: 1990-2005 for Century| 1985-1989 for Electra| 2005-2009 for LaCrosse.
  • Fit for Vehicles: 1987-1993 for Allante| 2003-2007 for CTS| 1985-2005 for DeVille| 2006-2008 for DTS.
  • Fit for Vehicles: 1984-1989 for Celebrity| 2005-2011 for Equinox| 2000-2008 for Impala. If you have any questions please feel free to contact us.(The upper left corner).
  • WHEEL ADAPTERS & SPACERS 12mm POSITIVE FACTORS -- Wheel Spacers can be used to widen the stance of the vehicle and give additional clearance on the inner portion of the wheel for brake and suspension components. Moving the wheels outboard increases the track width of the car. The increase in track width also lowers the roll centre of the car and therefore increases the amount of cornering force that the car is able to carry through its tires..
  • 5X115 WHEEL SPACERS 12mm SPECIFICATIONS -- 5 Lug Wheel Spacer Kit Thickness: 12mm| Vehicle Bolt Patter: 5X115 (vehicle)| Wheel Bolt Pattern: 5X115(wheel)| Center Bore: 70.3mm| Hub centric: YES| Quantity: Two(2)| Color: Silver.
  • WHEEL ADAPTERS PREMIUM QUALITY - Abrillvt's wheel spacers reduce rust problems, comes pre-installed with heat-treated and hardened grade 10.9 bolts, and is exceptionally strong an....
Check Stock

BRTEC 1.25 Thick/6x5.5 Pattern/Inner Diameter 106mm Wheel Spacers fits 1996-2017 for Toyota 4-Runner/Tacoma/Tundra Hubcentric Wheel Spacers 2pcs

  • Compatible with: 1996-17 for Toyota 4-Runner.
  • 2001-2017 for Toyota Tacoma (6 Lug Only).
  • Specification&Parameter: Wheel bolt pattern: 6x5.5"/6x139.7mm, Vehicle bolt pattern: 6x5.5"/6x139.7mm, Inner Diameter: 106mm, Thickness: 1.25”,....
  • BRTEC’s 12-month warranty and is included free with all BRTEC brand wheel spacers. Your wheel spacers are guaranteed to remain in good operating....
  • BENEFITS: Increases tire clearance to allow installation of wider wheels and tires. Gives your vehicle a more aggressive stance. Improves handling....
  • HUBCENTRIC DESIGN: Eliminates frequency of vibration ensures exceptional wheel balance and. The 78.1mm bore ensures a tight fit on the your hub. And....
Check Stock

Rying 6x5.5 Wheel Spacers for Tacoma Tundra 4 Runner FJ Cruiser Sequoia Land Cruiser GX460 GX470 1.5 inch 6x139.7 Hubcentric Wheel Spacers 106mm Hub Centric with 12x1.5 ET Lug Nuts.

  • SPECS 6x5.5 Wheel Spacers: (shown as second photo) Vehicle Bolt Pattern 6x5.5(6x139.7mm). Wheel Bolt Pattern (6x139.7mm). Hub bore: 106mm. Thickness:....
  • PACKAGE INCLUDES: 4x wheel spacers (1.5" per unit). 24 x open ET lug nuts. 2x user manual..
  • ADAPTATION: Compatible with 1989-2021 4 Runner, 2007-2020 FJ Cruiser, 2001-2007 Sequoia, 1993-1998 T100, 1995-2021 Tacoma 6 Lug Vehicle, 2005-2021....
  • ADVANTAGE: (1) Forged 6061-T6 Aluminum Alloy material, High-quality pre-installed heat treated 12.9-grade studs, enhances the strength of the wheel....
  • WARRANTY: Wheel spacer kit comes complete with a 2 Year warranty. Contact Seller customer service if you have any questions, We will solve your....
Check Stock

DCVAMOUS 4PC Black 6x5.5 Hubcentric Wheel Spacers 2 Inch with 12x1.5 Studs Compatible with Toyota 6 Lug 6x139.7 for 1995-2022 Tacoma | 1986-2022 4Runner | 2007-2014 FJ Cruiser | 2000-2006 Tundra

  • 【2" Hub-Centric Wheel Spacers】Give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, clear breaks or struts.....
  • 【6x5.5/6x139.7 Wheel Spacers Compatible with Toyota 6 Lug Vehicle】Perfect fitment: 1995-2022 Tacoma(Only vehicle with 6 lug wheels), 1996-2022....
  • 【Set of 4】Thickness: 2 inch / 50mm, Vehicle bolt pattern: 6x5.5" / 6x139.7mm, Wheel bolt pattern: 6x5.5" / 6x139.7mm, Center bore: 106mm, Thread....
  • 【Easy to use】With grade 10.9 studs, lug nuts, complete kit comes with everything needed for a complete installation..
  • 【Quality guarantee】Made of aerospace alloy aluminum 6061, T6 treatment, precision CNC machined, hard oxidation finished surface..
Check Stock

6x5.5 Hubcentric Wheel Spacer 1.5 38mm for Toyota Tacoma 4Runner Fortuner FJ Sequoia Tundra Ventury Hilux | Lexus GX460 GX470 4PCS 6x139.7mm Forged Wheel Adapters 106mm Hub Bore with M12x1.5 Studs

  • 【4PCS Wheel Spacers】- Thickness: 1.5"/38mm.
  • 【6x5.5 Wheel Adapters】- Compatible with 1995-2015 Tacoma (4WD/Pre-Runner/VVT-i) (not fit 2WD S-Runner or X-Runner) | 2016-2021 Tacoma | 1989-2021....
  • 【6x5.5 Wheel Adapters】- Compatible with 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Lexus GX460 | 2002 2003 2004 2005 2006 2007....
  • 【6x5.5 Wheel Adapters】- Compatible with 1989-2009 Toyota Hilux SURF|1979-2020 Toyota Hilux 4WD|2015-2020 Toyota Hilux REVO.
  • 【High Quality】- Forged from 6061-T6 aluminum alloy, CNC automatically machined to ensure high precision and stability, with anodized and....
Check Stock

StanceMagic - 12mm (1/2 inch) 5x114.3 Hubcentric Wheel Spacers (60.1mm Bore) Compatible with Toyota Avalon Camry Supra Scion Tc Lexus ES300 ES330 ES350 IS250 IS300 IS350 GS300 GS350 (Black, Pack of 2)

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/114.3 (5/4.5") bolt pattern and 60.1mm Centerbore. Only compatible with Scion Toyota Lexus. WILL NOT FIT other vehicle makes. Compatible with Scion 2011-2016 tC, 2008-2015 xB. Compatible with Toyota Avalon, Camry, RAV4, MR2, Solara, Supra, Tacoma. Compatible with Lexus ES300h ES330 ES350 GS300 GS350 GS400 GS430 IS250 IS300 IS300 IS350 LS400 LS430 NX200t NX300 NX300h SC300 SC400 SC430. Check Year/Make/Model in Description..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have extended wheel studs (at least 12mm longer than stock) to ensure safe nut thread engagement.
  • 2) Are aware that this listing is for spacers only, that extended wheel studs are NOT INCLUDED.
  • 3) You have 1/2" (12mm) of space between your fender and your wheel/tire.
  • 4) Wheel bore needs to be no smaller than 60.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 1/2" (12mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 60.1mm | Lip Diameter: 60.1mm | This listing is for Spacers Only, Extended Wheel Studs / Additional hardware Not Included. [MATERIAL ....
Check Stock

DCVAMOUS 4PC Black 6x5.5 Hubcentric Wheel Spacers 1.5 Inch w/ 12x1.5 Studs Compatible with Toyota 6 Lug for 1995-2021 Tacoma Only 6 Lugs | 1986-2021 4Runner | 2007-2014 FJ Cruiser | 2000-2006 Tundra

  • 【1.5" Hub-centric Wheel Spacers】Give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, clear breaks or struts.....
  • 【6x5.5/6x139.7 Wheel Spacers Compatible with Toyota 6 Lug Vehicle】Perfect fitment: 1995-2021 Tacoma(Only vehicle with 6 lug wheels), 1996-2021....
  • 【Set of 4】Thickness: 1.5 inch / 38mm, Vehicle bolt pattern: 6x5.5" / 6x139.7mm, Wheel bolt pattern: 6x5.5" / 6x139.7mm, Center bore: 106mm, Thread....
  • 【Easy to use】With grade 10.9 studs, lug nuts, complete kit comes with everything needed for a complete installation..
  • 【Quality guarantee】Made of aerospace alloy aluminum 6061, T6 treatment, precision CNC machined, hard oxidation finished surface..
Check Stock

Supreme Suspensions - 4pc Set - Silver - 2 Hub Centric Wheel Spacers for Toyota Tacoma PreRunner 2WD & Tacoma 4WD - BP 6x5.5 / CB 106mm / Studs M12x1.5 [4 Tire Valve Caps Included]

  • COMPATIBLE WITH 1995 - 2020 Toyota Tacoma PreRunner (6-Lug 2WD) and 1995 - 2021 Toyota Tacoma (4WD). *Will NOT work on vehicles with DUALLY wheels or....
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps,....
  • SPECIFICATIONS: 2 Inches Thick, 6 x 5.5" (6 x 139.7mm) Bolt Pattern, M12 x 1.5 Studs, 106mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the....
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet....
Check Stock

ZHTEAPR 4pc 12mm 1/2 Universal Wheel Spacers Adapters Compatible with Toyota Chevy GMC 6 Lug and 5 Lug Ford Dodge 5x5.5 5x139.7 6x5.5 6x139.7 for 75-96 F150,94-18 Ram 1500,98-20 Silverado 1500

  • 【12mm or 1/2" Universal Wheel Spacers】 Designed to move the wheel further out from the hub, gives your vehicle additional clearance to allow....
  • 【5x5.5" 5x139.7 6x5.5" 6x139.7 Flat Wheel Spacers Compatible with Toyota-Chevy-GMC 6 Lug & Ford-Dodge 5 Lug】6 Lug: 1995-2020 Tacoma (Only 4WD,....
  • 【Set of 4】Thickness: 1/2" or 12mm, Center bore: 108mm, Outer diameter: 175mm, Fitment bolt pattern: 5x5.5" / 5x139.7, 6x5.5"/ 6x139.7, Fitment....
  • 【Quality guarantee】Made of high quality cast aluminum, to ensure the highest level of performance and durability for your vehicles..
Check Stock

SCITOO 4X 5x5 to 6x5.5 Wheel Spacers Adapters 6 Lug 14x1.5 78.1mm 2" fits for 1979-1986 for C1500 1999-2014 for Grand for Cherokee 1975-1986 for C10

  • 【WHEEL ADAPTER SPACERS 6 LUG 2 INCH Specifications】The WHEEL SPACERS 5x5 to 6x5.5 with Thickenss:2".
  • 【COMPATIABLE VEHICLES】The WHEEL SPACER 2 inch fit for 1992-1999 for Blazer 1979-1986 for K1500.
  • 【WHEEL SPACERS ADAPTER 5X5 TO 6X5.5 PRETTY QUALITY】alloy aluminum 6061 T6,to ensure the high level of performance and durability for your vehicles.
  • 【6 LUG WHEEL SPACERS ADAPTER 2 INCH MATERIAL】Each of our wheel spacers are built to last! Made from the best true T-6 billet aluminum.
  • 【WHEEL ADAPTER SPACERS 2 INCH SECURITY】The studs of our spacers are grade 10.9,heat treated and hardened heavy duty studs for Manufacture.
Check Stock

2pcs 5mm Hubcentric 4x114.3 Wheel Spacers (66.1mm bore) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5)

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 4/114.3 (4/4.5") bolt pattern and 66.1mm Centerbore. Compatible with Nissan 84-88 200SX, 88-94 240SX, 95-98 240SX Base Model, 240Z (Rear Hub), 260Z (Rear Hub), 280Z (Rear Hub), 280ZX (Rear Hub), 84-86 300ZX. Compatible with Nissan 93-01 Altima, 09-11 Cube, 85-88 Maxima, 00-10 Sentra. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing....
Check Stock