Top Bevel Gear Tooth

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

  • Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
  • Made of 45# steel with high wear-resistance, strong and durable..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
  • Scope of application: for all kinds of mechanical transmission occasions..
Check Stock

BAHCO PC-24-TIM 24 Inch Professional Cut Timber Saw

  • Hard point saw with substantially thicker blade which results in less power-consuming side vibrations.
  • Bevel ground teeth on thick blade for height precision and straight cutting with exceptionally good stability.
  • Screwed, one piece two-component ergo handle.
  • Handle placement provides even distribution of power along the tooth line.
  • Comes with reusable plastic patented tooth protector.
Check Stock

Irwin Tools 1807369 Marples Laser Cut 10-Inch 60-Tooth Alternate Tooth Bevel Circular with Raker Tooth Circular Saw Blade

  • Designed for fine cross cutting on a Table Saw or Miter Saw.
  • Alternate Tooth Bevel with Racer Tooth for knife like cuts and racer tooth for smooth finish.
  • Extra Sharp oversized carbide teeth are re-sharp enable for long life.
  • Heat Resistant Non-stick coating reduces gumming for easy cleanup and truer, cleaner cuts.
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

SKIL PWR CORE 20 Brushless 20V 6-1/2'' Circular Saw Kit, Includes 4.0 Ah Battery, PWR ASSIST UBS Adapter AND PWR JUMP Chargers - CR5413-1A

  • LONGER RUN TIME & BATTERY LIFE—Industry leading PWR CORE 20 lithium battery technology wraps each cell with cooling material to keep the battery powering on for 25% longer run time and 2X battery life..
  • CHARGES IN 5 MINUTES—Automatic PWR Jump charges the battery in just 5 minutes..
  • QUICK AND CLEAN CUTS—24-tooth ultra-thin carbide-tipped blade ensures accurate cuts again and again, while integrated dust blower keeps cut line visible..
  • DIGITAL BRUSHLESS MOTOR—Provides efficient, high-performance and extended tool life..
  • 0-50 DEGREE BEVEL CAPACITY—Easy bevel adjustment allows for a variety of bevel cuts and many applications..
Check Stock

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Ologymart 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear

  • Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
  • Pieces 75, ideal for DIY science and small production, product design and mechanical model.
  • 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
  • 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
  • 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.
Check Stock

BOSCH Tools Track Saw - GKT13-225L 6-1/2 In. Precison Saw with Plunge Action & Carrying Case

  • Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood.
  • Plunge mechanism – allows for precise plunge cuts with accurate depth of cut.
  • Single bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cuts.
  • Constant electronics – helps maintain speed under the load of more-demanding applications.
  • Overload protection – protect the motor from overheating.
  • Efficient dust extraction – when connected to suitable vacuum cleaner, supports easier working conditions.
  • Swiveling hose port – keeps optional vacuum cleaner hose out of the way.
  • Easy blade-change system – quick three-step blade swap with spindle lock and on-board hex key.
  • Tracking adjustment – features front and rear knobs for adjusting the precision of the fit of the saw to the track to deliver the best cutting experience.
  • Specialized 48-tooth 6-1/2 In. track saw blade – designed for clean, precise results.
Check Stock