Top Beverage Pva Film

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

  • Enhanced PVA formulation with improved stability for 3D printing.
  • Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
  • Much greater thermal stability than standard PVA.
  • Perfect support for prints with large overhangs or complex internal geometries.
  • Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
  • Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
  • Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..
Check Stock

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

  • HANDS-FREE SELF-WRINGING SYSTEM – This mop comes with a bucket that can clean the mop in a second. It also squeezes the mop in a second. When you knock over a lot of water, he can easily recycle the water. This PVA mop can also be used outdoors..
  • GREAT PVA SPONGE - The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional sponge mops. When you need to use it again, just soak it in water for a little while and it will be restored..
  • YOU NEED A PVA SPONGE MOP – All mops wet the floor when they are finished, only the PVA sponge mop can soak up all the moisture. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • COMPACT FOR EASY STORAGE: This sponge mop bucket is perfect for small apartment. Small bucket but as it uses water effective, can do big areas. All pieces are compact enough to fit effortlessly inside the bucket. When you don't use it, just put your household cleaning tools in the corner and never wor....
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
  • Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
  • Consistent Diameter - +/- .03mm dimensional accuracy.
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
  • Works on all major dual extruder 3D printer brands.
Check Stock

Evaporative Cooling Vest for Women Men Cool Vest Heatstroke Prevention Body Cool Down Cold Vest for Hot WeatherEvaporative Cooling Vest for Women Men Cool Vest Heatstroke Prevention Body Cool Down Cold Vest for Hot Weather (Blue)

  • 【PVA evaporative cooling material】 Evaporative cooling vest using the latest high-quality PVA synthetic fabric,skin-friendly and comfortable,accelerate sweat discharge,decrease body surface temperature quickly..
  • 【Strong water absorption】 PVA material has strong water absorption,after soaking in the water, immediately lock the water,combination of moisture and PVA material,gentle release of water vapor,cool vest bring you lasting cool..
  • 【Long duration】Almost whole body PVA evaporative cooling material,and possess strong water absorption characteristics,body cooling vest can be used for 6-8 hours,stay cool while you are working non-stop,keep cool to avoid heat stroke..
  • 【Method of use】 Use normal temperature tap water soak for 1-3 minutes,let the cold vest fully absorb water,wring out the water and can use it.Zero chemical,physical cooling,can be reused many times..
  • 【Application】 Applicable to the vast majority of places.Outdoor,kitchen,running,fishing,mountain,climbing,cycling and more,ice cooling vest keep you cool at work,cool down quickly and heatstroke prevention..
Check Stock

1PK W10843353 W11205083 W10695459 Compatible With Whirlpool Refrigerator LED Light Board Module

  • Durable and Good adaptability – The felt fabric is compact enough so that the fabric has highly anti-wear, anti-tear, absorbent, waterproof performance. The waterproof backing is tightly sticks to the fabric and is difficult to be separated from the fabric even being machine washed. The Refrigerators mat can be used on any indoor or outdoor surfaces, whether muddy or damp or dirty ground..
  • Perfect Protection – The Beverage Refrigerators mat is made of absorbent fabric which can absorb water and other undesired liquid. It helps to protect your floor from spilled water, splatter or other stains. The backside of the mat is covered with smooth waterproof PVC film which can prevent undesired liquid soaking through..
  • Use Convenience – The Beverage Refrigerators mat can be rolled up for storage and carrying. The smooth waterproof PVC film can helps to keep the mat in place and not to move around..
  • Washable and Reusable – The Beverage Refrigerators can be easily cleaned by washing machine, hand wash or horse off or vacuum. The Refrigerators can be reused for many times..
  • The Mat dimensions: 36inches x 54inches x 0.2inches.
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 1kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens

  • PREMIUM PVA: Our professional grade filament ensures better dissolvability, stronger toughness, smoother printing, no bubbles, no warping, and a pleasant tangle-free experience. ROHS and CE certified..
  • DISSOLVABLE FILAMENT - Fused Materials PVA is a water-soluble filament used with dual extruder 3D printers to print support structures, molds, complex shapes and more!.
  • OPTIMIZED FOR PLA – Fused Materials PVA was designed to be a user-friendly dissolvable material and works best with many common materials such as PLA..
  • VACUUM SEALED: Fused Materials PVA is comes packaged in a vacuumed resealable mylar pouch with an added desiccant to preserve the filament quality. When the filament is not in use, easily reseal the bag to prevent dust build up and moisture buildup..
  • TECHNICAL SPECIFICATIONS: Consistent Diameter - +/- .03mm dimensional accuracy. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 1.50.
  • 1 kg spool (2.2lbs). Recommended extrusion/nozzle temperature 190°C - 220°C, bed 50-80℃. Works perfectly with all common 1.75mm FDM 3D printers..
Check Stock

Tekbond Wood Glue, PVA Wood Glue for Furniture and Woodworking, 8oz (Pack of 1)

  • MULTI-PURPOSE: Tekbond PVA Wood glue is ideal for gluing and repairing furniture, fittings, putters, wood assembly and cold rolling applications.
  • STRONG ADHESION: This PVA yellow wood glue provides strong adhesion between wood and materials such as concrete, fabric, leather, textiles, wood cardboard and felt.
  • MOISTURE RESISTANT: Designed with a moisture resistant composition that makes it suitable for both indoor and outdoor woodworking projects.
  • FAST DRYING: Dries rapidly to support a quick completion of all woodworking projects.
  • PACKAGE CONTAINS: Each pack contains 1 container of PVA Wood glue, 8oz (Pack of 1).
Check Stock

Tekbond Wood Glue, PVA Wood Glue for Furniture and Woodworking, 16oz (Pack of 1)

  • MULTI-PURPOSE: Tekbond PVA Wood glue is ideal for gluing and repairing furniture, fittings, putters, wood assembly and cold rolling applications.
  • STRONG ADHESION: This PVA yellow wood glue provides strong adhesion between wood and materials such as concrete, fabric, leather, textiles, wood cardboard and felt.
  • MOISTURE RESISTANT: Designed with a moisture resistant composition that makes it suitable for both indoor and outdoor woodworking projects.
  • FAST DRYING: Dries rapidly to support a quick completion of all woodworking projects.
  • PACKAGE CONTAINS: Each pack contains 1 container of PVA Wood glue, 16oz (Pack of 1).
Check Stock

Fused Materials PVA 3D Printer Filament, 2.85mm, 0.5kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens

  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
  • Consistent Diameter - +/- .03mm dimensional accuracy.
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
  • Works on all major dual extruder 3D printer brands.
Check Stock

MakerBot PVA Support Filament Spool for Method 3D Printer (Natural, 0.45kg/1lb)

  • Type: MakerBot’s Precision Dissolving PVA ensures fast and effortless support removal for your most complex prints.
  • Compatible With: PVA is a water soluble support material that is compatible with many lower temperature model materials such as PLA and PETG.
  • For Complex Printing: Because PVA is water soluble it is very office friendly, and is a great option for printing the most complex geometries in a prototyping environment.
  • Spool: Smart Spool provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
  • Keep It Dry: Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
Check Stock