Top Big Orifice Valves - BuyWiseBest.com

1/4\ NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
-NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..

[COMPATIBILITY]--These are propane nozzle for turkey pot cooker, cast iron cooker stove with 3/8" male thread x 1/8" NPT thread and jets. The orifice compatible with Gasone cooker or other similar brand..
[SIZES]--The thread of propane orifice: 3/8" flare MNPT x 1/8" MNPT..
[PREMIUM QUALITY]--This gas orifice jets connector brass hose fitting is made of high quality brass. Brass for corrosion resistance and durability , high temperature ductility and low magnetic permeability..
[NOTE]--The propane stove orifice is not fit for potable water appliances..
[SERVICE WARRANTY]--If you have any questions with 3/8 flare to 1/8 orifice, please contact with us and we will reply within 24 hours..

ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam..
Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam....
If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and....
FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch.
foam creator made of stainless steel, work durably in the foam sprayer.
ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam lance. Max. Pressure: 3000....

Five piece universal kit in a custom molded case.
Includes all the tools you need to remove and install any style orifice tube.
Consists of an auger point shaft, nut and arbor, GM puller, extension and orifice tube puller.
Replacing orifice tubes should go hand-in-hand with compressor replacement.
Supercool offers one of the most complete A/C maintenance programs in the marketplace.

Product Function: AC orifice tube removal tool fits for most GM vehicles. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier.
Material: GUZIKO orifice tube removal tool is made of high-quality metal, which is sturdy and durable and can be used for a long time.
Easy to Use: The tool can be slid into and locked on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it can come out. It saves time trying to use needle-nose pliers to enter a small area to pull out the old orifice tube. Don't worry about breaking the end with pliers.
Notes: Sometimes you have to add a little bit of heat on the pipe to make the other accessories to loosen up a little bit. It's better to apply some heat the heat down and then start pulling.
After-sale Service: We will offer a 12 months service, if you have any problems in use, Please contact us at any time, we will respond within 12 hours.

The world’s most popular spinning wheel for 70 years. Many optional accessories make this an extremely versatile wheel..
Includes: 4 Standard Single Drive Bobbins, Vertical Lazy Kate, Threading Hook, and Learn to Spin Booklet..
Single drive ratios 7, 9, 12, 17:1. Orifice: 3/8 inch (1 cm). Orifice: 3/8 inch (1 cm). Orifice Height: 27 1/4 inches (69 cm). Wheel diameter 22 inches (56cm). Weight: 17.5 lb (8 kg)..
Made from New Zealand Silver Beech (unfinished). Assemble required..

Wet sand blaster for pressure washer is suction-fed injection of sand into water system..
Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI”..
The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output)..
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..

Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.