Top Big Size Pipe Fitting

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

3/4\-14 NPT Pipe Tap,American Standard Tap Tool

  • Each taper tap is used to cut internal threads in pipes.
  • This taper tap is ideal for pipe fittings.
  • Taps are tapered at a rate of 3/4 inches per foot.
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • 1/4" size with 18 NPT (National Pipe Taper).
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

SDTC Tech 1/2

  • FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
  • PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
  • MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
  • SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
  • APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

FORMUFIT F012CRX-UV Cross PVC Fitting, Furniture Grade, 1/2\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration. 20% Deeper sockets than plumbing fittings..
  • WORKS WITH 1/2" SIZE PVC PIPE: Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0. 840"). Uses either off-the-shelf 1/2" Size pipe or FORMUFIT Furniture Grade PVC pipe..
  • MADE TO LAST, EVEN UNDER LIGHTS: UV resistant PVC material resists indirect sunlight and fluorescent lighting degradation. No yellowing, discoloration or cracking unlike sub-par PVC fittings.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
  • ⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

letsFix PVC Elbow Fittings 1 1/4 Inch, 3-Way/4-Way/5-Way PVC Connectors for SCH40 1 1/4 Inch PVC Pipe - Build Heavy Duty PVC Furniture and Plumbing Projects Available, White [Pack of 4]

  • 【Premium Quality】Made of high quality plastic material, the fitting is able to withstand impact, not easy to crack or break..
  • 【PVC Fitting Size】This 5-Way PVC pipe fitting size is schedule 1 inch socket ,it's Ideal for Center Connections..
  • 【Widely Use】This PVC Pipe adapter is use for agricultural irrigation, soilless cultivation systems, furniture, shelves, pool products, DIY shelves products, spa, potable water, and chilled water applications..
  • 【Easy to Install】PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing..
  • 【100% Promise】Replacement or full refund can be provided if you are not satisfied with our 5 way PVC fitting..
Check Stock