Top Bimetal Blade

Karcy Normal Closed Bimetal Temperature Control Switch Thermostat 70 Celsius N.C KSD9700 Pack of 12

  • KSD9700 product is a kind of thermostat which adopt the bimetal head as the temperature sensing element..
  • The bimetal head is in free state and the contacts are closed when the electrical appliance is working in normal condition..
  • When the ambient temperature raises to the preset operating temperature, the contacts close as the plastic head deforms to jump when being heated, then the circuit is cut off to control the temperature . Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature..
  • Widely used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.
  • Package Content: pack of 12pcs 70 Celsius temperature control switch.
Check Stock

Lenox RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Extra Heavy Set, Positive Rake, 222\ Length, 1-1/4\ Width, 0.042\ Thick, 2-3 TPI

  • RX+ vari-tooth design reduces strippage at high feed rates.
  • Bimetal for cutting carbon steel and structural steel.
  • Good for cuts in tubular shapes, structural shapes, and tubular bundles.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check Stock

uxcell Electric Oven Thermostat, Adjustable Bimetal Rice Cooker Heating Temperature Controller, 15-20A Normal Close N.C

  • 【NORMAL CLOSE & 250V 15-20A】Rice cooker thermostat contact type is normal close N.C.The operating voltage and current is 250V 15-20A,4mm screw hole diameter.
  • 【COPPER CONTACT】Electric oven temperature limiter sensor has copper contact,high temperature resistance,good thermal conductivity and good electric conductivity.
  • 【ADJUSTABLE TEMPERATURE】If the operation temperature needs to be raised, the screw can be rotated counterclockwise.
  • if the operation temperature needs to be lowered, the screw can be rotated clockwise.Users can adjust them appropriately according to their own needs.
  • 【BIMETAL THERMOSTAT】Rice cooker temperature controller is with bimetal strip.Deformation of bimetal strip by heat effect, push thermostat to turn on-off electric contacts, control power supply and temperature of electric appliances.
  • 【WIDELY APPLICATION】Electric oven temperature controller is widely used in elextric heater, electric iron, rice cooker, toaster, fat fryer, warm electric light, oven and so on.
Check Stock

Starrett - 99176-06 Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Neutral Rake, 72\ Length, 1/2\ Width, 0.035\ Thick, 10 TPI

  • Bimetal blade is designed for cutting low alloy steel.
  • Good for cuts in solid, structural, and tubular shapes.
  • Variable tooth pitch reduces noise levels and vibration.
  • Intenss tooth design with neutral rake angle for general-purpose cutting.
  • Raker set helps clear chips for reduced clogging.
Check Stock

Starrett-99206-07-09 Intenss Pro Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 6-10 TPI

  • Bimetal blade is designed for cutting low alloy steel.
  • Good for cuts in solid, structural, and tubular shapes, and solid and tubular bundles.
  • Variable tooth pitch reduces noise levels and vibration.
  • Intenss tooth design with positive rake angle for high-production cutting operations.
  • Raker set helps clear chips for reduced clogging.
Check Stock

Fein Bi-Metal 1-3/16 x 2 Blade - Features Oscillating Saw Blade and StarLock Mount - 10 Pack - 63502157290

  • Premium Quality - It has an excellent service life, very clean cut and outstanding work performance. It is made from the highest quality metal....
  • Versatile - This bimetal E-cut fine saw blade with fine teeth gives the fastest work progress and maximum precision for sheet metal up to 5/64",....
  • Industry Made -- It has the Fein StarLock mounting system and fit every popular multifunction tool on the market..
  • Dependable - It has narrow, waisted shape for optimal cutting speed, good swarf removal, extremely precise and easily controlled cut with an....
  • Made in Germany - Fein is famous as a globally active company with German roots that stands for innovative and high-quality power tools and....
Check Stock

QLOUNI 24Pcs Oscillating Multi-Tool Accessory Kit - Oscillating Tool Blades for Sanding, Grinding and Cutting - Compatible with Dewalt Fein Multimaster Bosch Rockwell and More

  • ★[Wide Range of Blade Types] The 24pcs multitool blades kit contains grit sanding sheets, wood oscillating blades, bimetal multitool blades, scraper blades, carbide multitool blades，and diamond oscillating saw blades, which would be excellent for tackling a range home repairing. All kinds of oscillating saw blades meet your different cutting needs..
  • ★[Precise Cutting] Special Design for Precision Cutting--Built-in length markers on two sides, one side is inch and other is centimeter, ensure you can get accurate cuts easy and fast while you working with it..
  • ★[Durable Material] This set of saw blades is made of high-quality, thick gauge, high carbon steels and carbide, which have been processed using a special technology to ensure excellent wear resistance and long service life for each saw blade..
  • ★[Wide Compatibility] These oscillating saw blades Fit Fein Multimaster, Porter Rockwell Cable, Black & Decker , Bosch Craftsman, Ridgid Ryobi, Makita Milwaukee, Dewalt, Chicago, Hitachi and more (*NOTE: Does NOT fit Quick change or blade quick release tools, Dremel MM40/45, Bosch MX30, Rockwell Bolt On and Fein Starlock.).
  • ★[Various Applications] Equip your oscillating multi-tool to handle any jobs with this 100pcs accessory set, such as sawing or ....
Check Stock

Starrett - 99188-05-04-1/2 Intenss Pro-Die Band Saw Blade, Bimetal, Intenss Tooth, Wavy Set, Neutral Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 14-18 TPI

  • Bimetal blade is designed for cutting low alloy steel.
  • Good for cuts in solid, structural, and tubular shapes.
  • Variable tooth pitch reduces noise levels and vibration.
  • Intenss tooth design with neutral rake angle for general-purpose cutting.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Fewb Bi Metal Temperature Gauge, 0-120 ℃ Thermometer Round Type Gases Steam Thermometer with Extension Cord for Hot Water, Boilers, and Pipes, Pocket Grill Temperature for Incubators

  • Industrial Use: Bimetal thermometer is a kind of industrial instrument suitable for measuring medium and low temperature for field testing. Can be used to directly measure the temperature of gases, liquids and steam..
  • Send Control Signal: With electric contact bimetal thermometer, and can automatically send a control signal to cut off the power or alarm when the working temperature exceeds a given value..
  • and Easy to Read: Bimetallic thermometer has the advantages of , easy to read, robust and vibration resistant, can replace the industrial glass thermometer, widely used in industry and scientific research departments..
  • Response Speed: Bimetal thermometer also has the characteristics of quick response speed, small size, good linearity and more stable, which can make the user's work efficiency faster..
  • Applicable Scenarios: Mini, durable and portable enough to save space and carry around. Designed for accurate temperature readings, it is ideal for reptiles or plant glass containers, incubators, greenhouses or other pet animal applications..
Check Stock

81 Pack Oscillating Saw Blades LEILUO Oscillating Tool Blades to Cut Metal Wood Plastic Multitool Blades Fit Dewalt Milwaukee Makita Worx Rockwell Wen Ryobi Porter Genesis Black

  • ...aluminum alloy. Oscillating multi tool saw blades are made by special process. Ensure each oscillating saw blade has excellent wear resistance and long service life..
  • WIDE USAGE: Multitool blades can meet your needs of grinding, punching, cutting and shoveling. Japanese toothed multitool blades can cut wood quickly. Bimetal oscillating saw blade can cut high hardness cables. A spatula will remove the cement. Hard aluminum oscillating tool blade can polish cement floor..
  • EXQUISITE PACKAGING: Oscillating saw blades are marked in inches and centimeters. Ensure you can work more accurately and efficiently. A good product must have a nice package. Each piece is individually packaged to prevent collision damage from affecting the use, but also easy to carry and store..
  • MORE COMPATIBLE: The universal interface system is designed to be compatible with more than 95% of the electrical oscillating tool blades on the market. Such as Fein Multimaster, Ryobi, Milwaukee, Hitachi, Chicago, Craftsman, Dewalt. More details are in product description or contact us to confirm..
Check Stock

Fein Bimetal High Speed Circular Saw Blade for Starlock Plus Tool Mounting System - 1-Pack, 4\-Diameter - 63502176210

  • Precision Work - The perfect attachment for your Fein tool. With a vast range of applications, showcasing ideal precision work in metalworking and woodworking, with the highest quality material and manufacturing..
  • Versatile - It is ideal for long straight cuts and cutting existing parquet, laminate, and wood paneling..
  • Fit For Any Job - Fein Tool is available in two mount types, so you can find the perfect accessory for your multifunctional tool. Whether it's StarLock or Fein SuperCut 12-sided mount, there's a Fein Tool that suits your needs..
  • Exceptional Quality - Bimetal Blade has long service life, very clean cuts, and excellent work progress..
  • The Fein Tool Difference - Fein is famous as a globally active company with German roots that stands for high-quality power tools and accessories created for the toughest jobs in industry and the manual trades..
Check Stock

Fein StarLockMax MM 700 Max Basic Set with QuickIn System, Oscillating MultiTools - 250W Output, 10,000-19,500 OPM, 2 x 2,0° Range - 72296862090

  • Fit For Any Job - Fein Tool is available in two mount types, so you can find the perfect accessory for your multifunctional tool. Whether it's StarLock or Fein SuperCut 12-sided mount, there's a Fein Tool that suits your needs..
  • Super Quiet - The MM 700 offers minimal vibration and outstanding noise dampening means you can work comfortably, for longer..
  • Using Fein's QuickIn Tool Change, switch accessories in under 3 seconds with a patented, tool-free, Fein rapid-clamping system..
  • Best MultiTool for rapid work progress in interior construction and renovation with a bimetal saw blade for wood, metal, and plastics..
  • The 16 ft. (5m) rubber-clad, industrial-quality cord gives you room to work..
Check Stock