Top Binder Posts And Screws
Safety Innovations No Hole Stairway Baby Gate Mounting Kit - Fits Posts from 2 3/4 inches to 3 5/8 inches Wide with Square or Round Tops - No Adhesives On Or Screws in Your Posts, (2-Pack)
- PLEASE MEASURE YOU POST BEFORE PURCHASE. WATCH OUR INSTALLATION VIDEO – LEARN MORE ABOUT INSTALLATION.
- NO HOLES IN YOUR POSTS EVER – No Matter If Your Posts Are Square At The Top Or Round You Never Have To Put Screws Into Your Post.
- SOLID CLAMPS WITH METAL BOLTS – No Inexpensive Plastic Straps Here – USED BY PROFESSIONAL CHILDPROOFERS EVERYWHERe.
- WHAT SIZE POST Will IT FIT? – The Kit Fits Posts That Are At Least 2 3/4″ Wide And No More Than 3 5/8″ Inches Wide. Please Measure Your Post Before Ordering! – HOW MANY KITS WILL I NEED? – One Kit Is Required For Each Post You Are Attaching Your Gate To.
- WHAT IS INCLUDED? – The Box Includes 2- 36″ Wood Strip, 4 Square Clams, 4 Wood Inserts For Clamps, 2 Sets Round Adapters, 8 Bolts, 2 Set Of Interlocking Shims, 4 Finish Washers, 4 – 1 1/2″ Screws, 4 – 1 3/4″ Screws And Instructions. The Screws Listed Are For Attaching The Wood Rail To The Clamps. No Screws Go Into Your Post!h.
Check StockSafety Innovations No Hole Stairway Baby Gate Mounting Kit - Fits Posts from 2 3/4 inches to 3 5/8 inches Wide with Square or Round Tops - No Adhesives On Or Screws in Your Posts, (1-Pack)
- PLEASE MEASURE YOU POST BEFORE PURCHASE. WATCH OUR INSTALLATION VIDEO - LEARN ABOUT THE INSTALLATION - NO HOLES IN YOUR POSTS EVER - No Matter If Your Posts Are Square At The Top Or Round You Never Have To Put Screws Into Your Post.
- SOLID CLAMPS WITH METAL BOLTS - No Inexpensive Plastic Straps Here - USED BY PROFESSIONAL CHILDPROOFERS EVERYWHERe.
- WHAT SIZE POST Will IT FIT? - The Kit Fits Posts That Are At Least 2 3/4" Wide And No More Than 3 5/8" Inches Wide. Please Measure Your Post Before Ordering! - HOW MANY KITS WILL I NEED? - One Kit Is Required For Each Post You Are Attaching Your Gate To.
- WHAT IS INCLUDED? - The Kit Includes 1- 36" Wood Strip, 2 Square Clams, 2 Wood Inserts For Clamps, 1 Set Round Adapters, 4 Bolts, 1 Set Of Interlocking Shims, 2 Finish Washers, 2 - 1 1/2" Screws, 2 - 1 3/4" Screws And Instructions. The Screws Listed Are For Attaching The Wood Rail To The Clamps. No Screws Go Into Your Post!.
- HOW CAN I LEARN MORE ABOUT INSTALLATION? - Full Instructions Are Included In Our Images.
Check StockTonGass (24-Pack) True I.D. 6x6' Fence Post Caps - Made from Black Durable Plastic - Protect Wooden Fence Poles Outdoor in Low Profile
- With inside dimensions of 6" by 6" and an edge height of 1/2", these black plastic fence post caps will fit perfectly on most fence posts.
- Made from thick, highly durable and weatherproof plastic, our plastic post caps are UV and heat-resistant, impact-resistant and waterproof. There won't be fading, cracking for years to come.
- The black caps will slip easily on top of the posts. Even when the post is a few millimeters bigger, the caps will flex enough to fit, but it won't stretch further.
- There are 4 options in securing the caps to the posts: tape, nails, screws and adhesive. For tape, stick some mounting tape inside the cap and then snap on. For both nails & screws, you'll need to drill a pilot hole in at least two sides of the caps. If using an adhesive, ensure that said adhesive will bond on both plastic and wood.
Check StockPssopp 100Pcs Binding Bars Slide Grip Binding Bars Report Cover A4 Spine Bars with 40 Sheet Capacity A4 Size for School Office Resume Files Supplies(5mm)
- Charles Leonard 3706L Post Binder Aluminum Screw Posts, 3/16" Diameter, 1" Long, 100/Box.
- To bind catalog covers, price lists, sample books. Posts are 3/16" dia. with 3/8" heads. Work with most screw post binders..
Check StockYICBOR Sewing Machine Double Fold Clean Finish Top & Bottom Binding Binder Attachment (1-1/2\- 3/8\)
- Sewing Machine Double Fold Clean Finish Top & Bottom Binding Binder Attachment.
- This binder is used to insert bias binding or tape along the edge of the garment.
- This binder folds the tape in half around the fabric then underfolds both top & bottom edges of the binding, making a CLEAN finish top & bottom as shown in the diagram. This binder comes with 2 attachment mounting thumb screws..
- This binder set will fit most industrial & home sewing machines with attachment mounting holes in the machine bed including, Artisan,Brother, Consew, Gemsy, Juki, Mitsubishi, Reliable, Rex, Singer, SunStar, Tacsew, Yamata and many other..
Check StockVEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber
- [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
- (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
- [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
- Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
- [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
- Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
- [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
- 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
- [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
- Wooden posts and installation screws not included.
Check StockSew link Sewing Machine Single Fold Tape Binder Binding Attachment with Swing Bracket Size 1-3/8 inches
- This is a new style binder used to insert bias binding or tape along the edge of the garment..
- This binder folds the tape in half around the fabric then underfolds both top & bottom edges of the binding, making a CLEAN finish top & bottom.....
- The binder does not need to be removed after use, just swing it out of the way. The position of outlet can be adjusted to be backword or forward and....
- Screws for attaching the binder are included. it fits most Singer machine, but not sure fit some PFAFF DURKOPP ADLER sewing machine..
- This binder set will fit most industrial & home sewing machines with attachment mounting holes in the machine bed including Artisan, Brother, Consew,....
Check StockPerfin Wooden Wall Hooks Plant Hangers Indoor 8-Inch Wall Mounted Hanging Plant Hooks for Planters Lanterns Flower Bracket Wind Chimes Decoration Hooks 2 Pack
- 【Premium quality】 100% beech wood wall hook, nice wood grain, handcrafted with care for long-lasting use. Two screws fixing layout provides high....
- 【Multi-Purpose】 A very useful indoor decoration tool. Beautify your home or garden by hanging plants, lanterns, holiday decorations, string....
- 【Stylish Design】 Screw this wall plant hanger into indoor walls, wood fence posts, or even deck posts. Looks great within a variety of different....
- 【Easy to Install】 Our hanging plant hooks come with screws that are right for most applications. But it is also easy to substitute longer screws....
- 【Package Includes 】 2 hanging plant hooks with 4 mounting screws. Approx. dimension: 8-1/4 x 9-1/5 Inches. This wooden decor hook will easily hold....
Check StockMurdy No. 1 Leather Binder (Wide Cut, Espresso)
- High quality 5-6 oz smooth grain oil tanned leather.
- Comes with hardware to adapt binder from 1-120 pages.
- Add any standard 3 hole punch 8.5"x11" paper.
Check StockSoobool 4x4 Pergola Bracket Kit with Black Powder Coated, Aluminium Alloy, 4 Arm Pergola 3-Way Corner Extension Brackets and 4 Solos Pergola Post Base for 4x4 Wood Post(Actual: 3.5"x3.5")
- WOOD & ALUMINUM POSTS: Our 4x4 brackets accommodate dressed lumber, commonly called 4x4’s at local building supplies. The actual measure is 3.5” x 3.5”. Also suitable for actual 3.5" x 3.5" aluminum posts. The internal dimensions of this kit are 3.54" x 3.54"(90mm). very tight!.
- MATERIAL : High quality aluminum alloy, The thickness of SOLO and TRIO is 3mm, and the bottom thickness of SOLO is 6mm. Perfect for the overall structure of your pergola, very sturd!.
- WEATHER-READY : Coated in weather-resistant materials, Resists harsh environments and remains intact..
- PACKAGE : SOLO Pergola Post Base for 4x4 Wood Posts | 4 Pack and TRIO 3 Arm Pergola Corner Bracket for 4x4 Wood Posts | 4 Pack, and expansion screws and fastening screws required for the kit..
- LONG WARRANTY : This pergola kit has a 6-year warranty period. If you encounter any problems during use, you can contact us at any time, and we will definitely give you a satisfactory solution..
Check StockHME TPCH T-Post Trail Camera Holder New Brown 2.00 X 5.00 X 8.00
- Mount trail cameras on T-style fence posts.
- Holder conveniently slides over and around posts.
- Trail cam easily rotates to the desired position.
- Has a 220 degree vertical adjustment and 360 degree rotational adjustment. Screws into the 1/4-20 socket on the camera..
- now a breeze to attach your trail cam to any side of most traditional T-style fence posts. Simply loosen the treaded knob enough to slide the holder....
Check StockPlain Edge Binder For Singe Needle Sewing Machines Fits Juki, Sailrite, Singer (Size 1\)
- This binder folds the tape in half around the fabric and makes RAW finish top and bottom..
- It is used to insert Tape, Braid, or Binding along the edge of the garment as shown in the diagram..
- This binder comes with 2 attachment mounting thumb screws..
- This binder will fit most industrial and home sewing machines with attachment mounting holes in the machine bed including, Bernina, Brother, Consew, Gemsy, Juki, Mitsubishi, Rex, Sailrite, Singer, SunStar, Tacsew, Yamata and many more..
Check Stock