Top Black Pipe Compression Fittings

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

Pipe Décor 1½ in. x 24 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 4 Pack

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH Black pipe are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Industrial Pipe of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Black iron pipe come in 4 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home.Iron pipe are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Anti-rust treatment: The surface of the cast iron pipe has been subjected to anti-rust treatment, which can prevent rust even if it is used for a long time in a humid environment..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Industrial charm. Home TZH pipe flange decoration combined with a little c....
Check Stock

(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings

  • COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
  • ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
  • TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
  • 3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
  • MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Check Stock

Bswox Bottle openers,Bottle Opener with Magnetic Cap Catcher - Pop Can Opener – Stick to Refrigerator for Easy Storage to Avoid Loss - Easy Picking-up

  • SIZE - 1/2" Steel Pipe, 30 Inches (76.2cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find standard NPT 1/2.
Check Stock

CMI Inc 3/4\ X 18\ Industrial Black Pipe, Malleable Cast Iron Pipe Nipple, for Vintage DIY Furniture Home Pipe Decor, Fits 3/4 Inch Black Threaded Pipe Nipples and Fittings 5 PACK (3/4\ X 18\)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH Black pipe are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Industrial Pipe of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Black iron pipe come in 4 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home.Iron pipe are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Anti-rust treatment: The surface of the cast iron pipe has been subjected to anti-rust treatment, which can prevent rust even if it is used for a long time in a humid environment..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Industrial charm. Home TZH pipe flange decoration combined with a little c....
Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 1 Inch (1.0) Grey/PVC / 5 FT

  • ...n hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
  • Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
  • Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x18-4..
  • Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience....
Check Stock

MILMUMU Compatible with Compression Sleeve Puller（03943） and Sleeve Remover for 1/2-Inch Compression Fittings Only

  • Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only.
  • Ideal for working on frozen or corroded supply stops.
  • Easily removes compression sleeves Won’t damage walls.
  • Wt: 11 ounces Dimensions: 6.8 x 4 x 0.8 inches.
  • Function: Removes Compression Sleeves without Damaging Pipe. Screws Directly into Compression Nut for Removal.
Check Stock

GeilSpace 6 Pack 1/2\ × 16\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Half Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (1/2\ × 16\

  • SIZE - 1/2" Steel Pipe, 16 Inches (40.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we o....
Check Stock

GeilSpace 6 Pack 3/4\ × 14\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Three Quarters Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (3/4\ × 14\

  • SIZE - 3/4" Steel Pipe, 14 Inches (35.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 3/4" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective paint at both ends makes pipes hard to screw into fittings, please remove the black paint. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 3/4" pipes. (O.D. of these pipes: 25.5mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer t....
Check Stock

3/4\ 6-Way Side Outlet Cross, Home TZH Cast Malleable Iron Pipe 6-Way Outlet Corner Fittings for Industrial vintage style DIY Project/Furniture/Shelving Decoration(10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 6-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • 2.Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 6-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 6-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 6-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • 4.Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retr....
Check Stock

3/4\ 4-Way Cross Fitting Connector, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 3/4“)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way cross fitting connector work great without sacrificing functionality..
  • Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft....
Check Stock

1/2\ 4-Way Cross Fitting Connector, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration(10, 1/2“)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way cross fitting connector work great without sacrificing functionality..
  • Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft....
Check Stock