Top Black Round Tube Pipe

QWORK 10Pcs 2\ Round Black Plastic Tubing Plug(10-14 Ga 1.740\-1.830\ ID), 2 Inch End Cap for Furniture Pipe Tube Cover Insert, Fitness Equipment, Chair Leg Pipe Tube Inserts

  • Specification: 2" Round Black Plastic Tubing Plug(10-14 Ga 1.740"-1.830" ID).
  • Wide Application: The end caps can be used in Steel Furniture Pipe Tube Cover Insert, Fitness Equipment End Caps, Fencing Post, Chair Leg Pipe Tube Inserts.
  • Suitable for: It is suitable for Unthreaded Surface Type with Straight Profile.
  • High Quality: Durable plastic, not easy to break, has great protective ability..
  • 100% Satisfied Service: Sincerely hope our products could give you a good experience and some help. Within a month you purchase this product, you can enjoy a worry-free return service. And any questions feel free to contact us, we will try our best to help you..
Check Stock

54pcs Black Pipe Post Bolt Screw Rubber Thread Protector Cover Vinyl Tube End Caps,Assorted 1/4-inch to 1 1/2-inch-6 Sizes

  • 54PCS– Assorted 1/4" to 1-1/2" Black Vinyl Round End Cap Cover for Pipe Plastic Tube Hub Caps Tubing Bolt Screw Rubber Thread Protector Safety Cover 6 sizes: 1/4"(20pcs), 3/8"(10pcs), 1/2"(10pcs), 3/4"(5pcs),7/8"(5pcs),1-1/2"(4pcs),Total 54pcs..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep for 7/8" and 1-1/2" sizes and 13/16" tall for 1/4.
Check Stock

Paper Towel Holder Countertop, Kitchen Roll Paper Dispenser Standing, Farmhouse Paper Holder Wood Base for Dining Table Living Room and Bathroom(White)

  • ...towels. This countertop tissue holder comes with a cap, so you can easily take the tissue without worrying about instability..
  • Industrial Pipe & Wood Base:The countertop tissue dispenser is made of a sturdy industrial tube and an elegant wooden board with strong hardness, and the exposed part is sprayed with elegant black paint to prevent rust. It is very durable, not easy to damage or break. And the independent open single-rod design can quickly and easily replace the paper towel rolls..
  • Easy Installation & Care: Connect the wrought iron pipe and the wooden board with a fixing plate and then tighten the pipe cap. The whole process will not take more than three minutes. The smooth pipe wall and the painted wooden board can be cleaned just by wiping with wet wipes and towels..
Check Stock

(Pack of 10) CAPLUGS (VC-1250-16) 1 1/4\-1 5/16\ - Round Black Vinyl Flexible End Cap | for 1.125 Inch OD Pipe Post Tubing Rod Cover -1\ Inside Height | by SBD

  • (Pack of 10) CAPLUGS (VC-1250-16) 1 1/4"-1 5/16" - Round Black Vinyl Flexible End Cap | for 1.125 Inch OD Pipe Post Tubing Rod Cover -1" inside Height | by SBD.
  • VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16" larger for a snug fit without tearing, splitting, or shredding. Select the size that matches or is slightly smaller than the outside measurement of the pipe or tube.
  • Made in The USA by Caplugs, an ISO 9001 Certified Company. VC Series caps are extremely flexible and durable protective closures which are ideal for use as thread protectors, dust and moisture seals, pipe and stud end color coding, and for masking during painting or plating operations..
  • All caps are 1" height / deep to provide a secure fit. Hardness Durometer 75A, Maximum Temperature180° F, Color Black..
  • Attractive glides for everything from household and patio furniture to exercise equipment. As finishing caps they cover any scratches, burrs or distortions that may result from cutting operations. In addition, they also provide protection against injury from sharp rod and tubing edges..
Check Stock

30 Pcs: Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover, Assorted 1/4-inch to 1/2-inch -3 Sizes

  • Quantity: Containted Assorted 1/4" to 1-1/2" Black 30 PCS Vinyl Round End Cap Cover for Pipe Plastic Tube Hub Caps Tubing Bolt Screw Rubber Thread Protector Safety Cover 3 sizes: (1/4" ,7mm )10 pcs,( 3/8.
Check Stock

ACDelco Professional 26221 Molded Turbocharger Intercooler Hose with Clamps

  • Color: Silver Pipe & Black Silicone Boots.
  • Upgrade from factory plastic tube that explodes,Tuning is NOT required.
  • Aluminium CNC / Strong durable intercooler boot.
  • Pipe Diameter: 3" (Lower Section), Pipe Diameter: 3.5" (Upper Section), Silicone Boot 1: 3.
Check Stock

(Pack of 4) 1-5/8\ to 1-11/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.625 Inch Pipe Post Tubing Rod OD Cover - 1\ inside Height.

  • (Pack of 4) 1-5/8" to 1-11/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.625 Inch Pipe Post Tubing Rod OD Cover - 1" inside Height..
  • Please check the OD of your tube before placing order as the size mentioned here is for OD of the tube and not ID.
  • Please note that the ID of the cap is 1-5/8" and good for tubes with OD 1-5/8". It works tight fit on 1-5/8" OD.It can stretch by 1/16" without tearing and be used on 1-11/16" OD tube..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

VEVOR Tube Notcher Kit 60 Degree Pipe Tubing Notcher w/13 Pc Bi-Metal Hole Saw 3/4\ -2-1/2\ with Case Tubing and Pipe Notcher 2 Drills Tube Notcher Tool for cutting holes through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Complete Set: Includes a pipe notcher, 10 hole saws: 3/4"-2-1/2" for needs in different situations, two drills and a spare pilot drills for replacement, a large mandrel, a small mandrel and a tool case for easy storage (together with a hex key).
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

VEVOR Tube Notcher Kit 60 Degree Pipe Tubing Notcher w/ 9 Pc Bi-Metal Hole Saw 3/4\ -2-1/4\ with Case Tubing and Pipe Notcher 2 Drills Tube Notcher Tool for cutting holes through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Complete Set: Includes a pipe notcher, 6 hole saws: 3/4"-2-1/4" for needs in different situations, two drills and a spare pilot drills for replacement, a large mandrel, a small mandrel and a tool case for easy storage (together with a hex key).
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

VEVOR Tube Notcher Kit 60 Degree Pipe Tubing Notcher w/18 Pc Bi-Metal Hole Saw 3/4\ -3-1/4\ with Case Tubing and Pipe Notcher 4 Drills Tube Notcher Tool for cutting holes through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Complete Set: Includes a pipe notcher, 13 hole saws: 3/4"-3-1/4" for needs in different situations, two drills and two spare pilot drills for replacement, a large mandrel, a small mandrel with medium adapter, and a tool case for easy storage (together with a hex key).
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

VEVOR Pipe Tubing Notcher 60 Degree Tubing and Pipe Notcher Hole Saw Up to 2\ Round Tubing Tube Notcher Tool Aluminium Frame Tube Notcher w/Instructions for Cutting Holes Through Metal, Wood, Plastic.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. A sturdy and durable steel frame holds your workpiece during operation..
  • Sturdy Construction: The solid, corrosion-resistant aluminum base, steel spindle, and bronze bushing make the tube and pipe notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-60 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. Max capacity up to 2-1/8" round tube, adopts less than 2-3/4" threaded arbor hole saws..
  • Wide Application: The mandrel is compatible with most hole saws of other manufacturers..
Check Stock