Top Black Welded Pipe

WeiSen Gloss Black 12" Ape Hanger Chizeled Easy Wire Handlebar Compatible with Harley Dyna Softail Sportster XL 883 1200 & 1994-2023 Road King & 1998-2013 Road Glide

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-2023 Road King Model & 1998-2013 Road Glide..
  • Material: Steel pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Surface Finish: Powder Coated Black (Copper+Nickle+Chrome) ,High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
  • Bar Diameter: 1-1/4 inch (1.25"). Center Width: 12 inch, Knurl Center to center Width: 5.4 inch & Clamp area Diameter: 1 inch. Grip Area Diameter: 1 inch. End Rise: 12 inch. Overall Width: 30.5 inch. Pullback/Sweep: 8 inch..
  • Model: Horn Ape Hanger Chizeled,Edge Cutting design for easy wiring. Pre-Drilled and Notched for TBW(Throttle By wire)..
  • Package Included: 1x Gloss Black 12" Ape Hanger Horn Easy Wire Handlebar.
Check Stock

BestEquip 42-5.5 Safety Bollard, 5-1/2\ OD Safety Barrier Bollard, 42\ Height Yellow Powder Coat Pipe Steel Safety Barrier, with 4 Free Anchor Bolts, for Traffic-Sensitive Area

  • Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 42 in/106.6 cm. Welded and integral structure enables the bollard post to withstand impact..
  • Yellow Finish 5.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 5.5 in/14 cm..
  • Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
  • Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
  • Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..
Check Stock

BestEquip Safety Bollard 36-4.5 Safety Barrier Bollard 4-1/2\ OD 36\ Height Yellow Powder Coat Pipe Steel Safety Barrier with 4 Free Anchor Bolts for Traffic-Sensitive Area

  • Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 36 in/91.4cm. Welded and integral structure enables the bollard post to withstand impact..
  • Yellow Finish 4.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 4.5 in/11.4 cm..
  • Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
  • Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
  • Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..
Check Stock

WeiSen Gloss Black 14' Ape Hangers Monkey Handlebar 1-1/4' Handle Bars Compatible with Harley Dyna Softail Sportster XL 883 1200 & Touring Road Glide/Road King

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-2022 Road King Model & 1998-2013 Road Glide. (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers).
  • Finish: Power Coat Gloss Black (Copper+Nickle+Power Coated Black). Condition: Aftermarket 100% brand new and high quality. Material: Steel pipe (Much Stronger than other’s Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance..
  • Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 10-1/2 inch, Clamp Area Width: 5.37 inch & Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 14 inch. Model: Monkey Bagger Bar. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch. Knurling Inside Width: 2.5″. Outside Width: 4.5″..
  • Pretty easy to install, no drilling required. Provide more comfortable driving experience and aggressive appearance..
  • Package include: 1x Ape Hangers Handlebar..
Check Stock

Top Notch Parts Replacement Big Bore Cylinder Complete Head Polished Ports Performance Camshaft For 99 00 01 02 03 04 05 06 07 08 Honda Trx400ex TRX 400ex 440cc

  • Economically priced high quality slip-on exhaust system.
  • USFS forestry approved screen type removable spark arrestor Included Tig welded stainless steel pipe construction 6061 Br+AM15u.
Check Stock

UPOWER 3" Inlet&Outlet Exhaust Resonator,9" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • ... Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
  • FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
  • PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 90-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check Stock

UPOWER 3" Inlet&Outlet Exhaust Resonator,16" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • ... Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
  • FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
  • PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 365-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check Stock

UPOWER 2.25" Inlet&Outlet Exhaust Resonator,14" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • ...easure your exhaust pipe’s dimension before purchasing this 2.25 inch muffler..
  • FIT: 2.25 inch inlet & outlet exhaust center straight through muffler, universal fit for all 2.25 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
  • PERFORMANCE: The 2.25 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 90-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check Stock

Mofun 12" Rise Ape Hangers 1.5" Fat Bars 1" Clamp Handlebars Fits for Harley Softail Dyna Sportster XL 883 1200 1998-2013 Road Glide 1994-2023 Road King Gloss Black

  • 【Fitments】:Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-up Road King Model & 1998-2013 Road Glide.**Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide** **Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers**Can not fit model with 1.25 Handlebar Clamp below.You can ask customer service for more detail information of motorcycle model..
  • 【Specifications】:Bar Diameter: 1.5 inch Fat Bar.Center Width: 11.75 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch.Grip Area Bar Diameter: 1 inch.End Rise: 12 inch.Overall Width: 35 inch.Pullback/Sweep: 8 inch..
  • 【High Quality】:Material: Seamless steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Finish: Powder Coated Black(Copper+Nickle+Black),High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
Check Stock

WeiSen 1-1/4" Gloss Black 14" Rise Monkey Bar Ape Hangers Handlebar Compatible with 1986-2023 Harley Davidson Bagger Touring Street Glide, Electra Glide, Ultra Limited Low

  • Fitment: Fit 1986-2023 Harley Davidson Touring Street Glide, Electra Glide, Ultra Limited Low with Batwing fairing..
  • Finish: Powder Coated Gloss Black Plating (Copper+Nickle+Powder Coating), High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral. Condition: Aftermarket 100% brand new and high quality. Material: Steel pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance..
  • Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 17.1 inch(outer width), Clamp Area Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 14 inch. Model: Monkey Bagger Bar. Overall Width: 36.5 inch. Pullback/Sweep: 10 inch..
  • Installation: Pretty easy to install and wire pulling, no drilling required, direct bolt-on replacement Handlebar for Harley FLHX/FLH stock equipment. Provide more comfortable driving experience and aggressive appearance..
  • Package include: 1x Gloss Black 14" Rise Ape Monkey Bar Handlebar..
Check Stock

Gloss Black Ape Hangers Handlebar 12" Rise 1 1/4" Handle Bars Compatible with Harley Davidson Sportster XL 1200 883 Softail Dyna Touring Road Glide & King Models

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & Road King Model & 1998-2013 Road Glide. (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Fit 1994-2023 Road King. Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers).
  • Finish: Power Coat Gloss Black (Copper+Nickle+Power Coated Black). Condition: Aftermarket 100% brand new and high quality. Material: Steel pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance..
  • Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 10-1/2 inch. Mounting Area Width: 5.9 inch & Diameter: 1 inch. Clamp Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 12 inch. Model: Monkey Bagger Bar. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch. Knurling Inside Width: 2.5". Outside Width: 4.5"..
  • Pretty easy to install, no drilling required. Provide more comfortable driving experience and aggressive appearance..
  • Package include: 1x Ape Hangers Handlebar..
Check Stock

Custom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390

  • Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
  • Comes complete with stainless steel mounting hardware for a quality installation..
Check Stock