Top Blast Furnace Slag

BBQ Dragon Large Chimney of Insanity Charcoal Starter | Fastest & Easy to Use Huge Charcoal Chimney Starter for Charcoal Grill | BBQ Accessories Charcoal Fire Starter | Compatible w/BBQ Dragon Fan

  • Fast and Easy to Operate- The Innovative design allow coals to be lit in as little as three minute..
  • 90 Degree Elbow- Open at the side of chimney, Turbo effect and draw more air than any other chimney..
  • Unique Side Hole- It allows lighting your coal without lifting the chimney or using lighter fluid..
  • Durable - Made by thick gauge galvanized steel with thick heat shield & heat resistant nylon handle..
  • For Optimum Performance - Use with Bbq Dragon fan,which turns it into insane charcoal blast furnace!.
Check Stock

YESWELDER Flux Core Mig Wire, Mild Steel E71TGS.035-Diameter, 10-Pound Spool

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ☛ 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb t....
Check Stock

Vaper 41225 Chipping Hammer

  • ✔️What You Get? --- In this welding slag removing tools kit, there is 1 piece 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Size Detail --- Welding Chipping Hammer: 255 × 125 × 20mm/10 × 5 × 0.78 inch (Handle length × Cone part length × Cone part width).
  • Wire Brush: 252 × 120mm/9.9 × 4.7 inch (Total length × Brush length).
  • Welding Gloves: 415mm/16.3 inch (Length)..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole on the end of handle, which is convenient for storage while not use it..
  • ✔️ Welding Chipping Hammer --- This professional welding hammer is forged with premium high carbon steel overal heat treatment, with high hardness, strength and toughness. Designed with a steel coil spring h....
Check Stock

Keadic Professional Welding Slag Removal Tools Kit, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Welding Plier, Wire Brush & Welding Gloves Heat/Fire Resistant

  • ✔️ Complete Welding Slag Removal Tools Kit --- In our multi-function welding tools set, we prepared 3 practical welding slag removing tools for you, including 1 8 Inch Anti-Rust Welding Plier, 1 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Anti-Rust Welding Plier --- The pliers body is forged with high quality carbon steel, sturdy and durable, not easy to rust/deform/break.The precise tooth pattern provide it strong clamping force, no-slip. After special heat treatment, the jaws are very sharper and firmer, which improves its service life. Further more, its ergonomic rubber covered handle bring you comfortable touch, suitable for long time operation..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole ....
Check Stock

PARAGON SC-2 KILN 120V

  • All New Design: The 2023 brand new pentagonal furnace has excellent melting performance. The exterior design combines stability and strength. With the rich accessories we provide, it can meet your various needs..
  • Exclusive Tongs:This furnace set is equipped with one lifting tongs and one pouring tongs. It allows you to safely and efficiently clamp the crucible filled with molten metal out of the furnace and pour the molten metal from the crucible into the molds..
  • Efficient Smelting: The stainless steel burner is equipped with American standard regulator and hose, which can output 135,000 BTU. The furnace can be quickly heated to 1400°C/2552°F. One-inch-thick ceramic fiber insulation blanket and custom ceramic nozzles keep the barrel from turning red, trapping all the heat inside the pentagonal combustion chamber..
  • Wide Range of Uses: 7KG of copper can be smelted at one time. The furnace can also melt glass and other metal materials such as aluminum, silver, and gold. Look forward to your one-of-a-kind creations with this melting furnace kit..
  • What You Get: Furnace,Burner,Gas hose....
Check Stock

Swpeet 5Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves, 8 Inch Welding Plier and 10 Inch Welding Chipping Hammer with Steel Coil Spring Handle

  • ☛ 1, What You Get ------ In this kit, You will get 5Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 piece welding plier, In total 5Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the s....
Check Stock

Goodman GDS80603AN Gas Furnace, Single-Stage Burner/Multi-Speed Blower, Downflow 80% AFUE - 60,000 BTU

  • Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit Corrosion-resistant, aluminized-steel furnace tubular heat exchanger Designed for dedicated downflow installations Energy-saving, reliable furnace hot surface ignition system with patented adaptive learning algorithm to maximize igniter life Aluminized furnace steel inshot burners Energy-saving PSC, multi-speed, direct drive furnace blower motor Heater has quiet.
Check Stock

28LB/12.8KG Stainless Steel Gas Propane Melting Furnace Deluxe Kit with Crucible and Tongs Stainless Steel Body Heat Up to 2700°F / 1482°C for Melting Gold Silver Copper Brass etc

  • HOME SMELTING:The propane melting furnace designed and produced by us is an excellent choice for your home smelting. It is safe, efficient and economical.Whether you are a novice or an experienced craftsman, whether you want to create a unique gift or are committed to the environmentally friendly recycling of waste. This luxurious melting furnace suit can meet your needs..
  • EFFICIENT FUN: Output 135,000 BTU. Compared with the electrically heated melting furnace, we use propane as the fuel, which has absolute advantages in both the heating efficiency and the highest temperature that can be reached.The temperature rises quickly to reduce your waiting time, which can double your fun in the melting process. It is normal for the side of the melting furnace to turn red during use, don't worry!.
  • WIDE RANGE USES: Because of the use of efficient burners and excellent ceramic fiber insulation materials, the inside of the furnace can be heated up to 1400°C/2552°F. With a large-capacity crucible, you can use this furnace to melt aluminum, copper, silver, gold and other metal materials. Burner doesn't work right not enough power? Check your air intake control is it opened.Check your regulator is it opened.Check gas tank is it full. Or disconnect PVC pipe and try t....
Check Stock

Tube Type Acylic Flowmeter, Air Flowmeter Oxygen Flowmeter,LZQ-5 Flowmeter 2.5-25 LPM Flow Meter with Control Valve for Oxygen/Air/Gas

  • 【FUNCTION】- This gas meter is connected to hose to measure unidirectional gas flow..
  • 【QUALITY MATERIALS 】- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure..
  • 【EASY TO USE】- It is simple to use, and has 8mm barbs for convenient connection to hoses..
  • 【WIDE USE】- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc..
  • 【PROFESSIONAL AFTER-SALES SERVICE】- We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer..
Check Stock

Propane Melting Furnace Kits 6kg 13LB Graphite Crucible Up to 2372℉ Made of Stainless Steel Barrel Smelt Metal,with Goggles and High Temperature Gloves

  • High standard: Our propane furnace body is made of stainless steel barrel, after pure manual electrolysis process. After use, the surface of the....
  • High efficiency: Propane furnace of proper size can make full use of heat, and the temperature in the furnace can reach 1300°C (2372°F) within 15....
  • Full package: Our propane furnace is equipped with a series of required accessories: furnace*1, crucible*1, tongs*1, ceramic fire plate*1 (only for....
  • Suitable capacity: after several calculations of graphite crucible capacity and the most commonly used volume of furnace, we decided to adopt the most....
  • Suitable for multiple places: 8.3*12.2inch propane furnace is suitable for metal smelting in various places. Metal can be smelted in the yard to make....
Check Stock

INETUB BA71TGS .030-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feed-ability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock