Top Blind Bearing Puller

BILITOOLS 15-Piece Bearing Puller Kit Ball Bearing Extractor Bearing Removal Tool Set

  • For the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself..
  • For removing grooved ball bearings without having to dismantle the shaft..
  • Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach..
  • Specification: Clamping width: 20 - 90 mm. Interchangeable heads: Ø 5.5 - 6 - 8 mm. Max. puller depth 200 mm. Suitable for use with ISO bearing sizes : 6004-6010 | 6201-6206 | 6300-6302..
  • Include: 1 x mechanical pressure spindle, 1 x cross-beam, 1 x center screw thread cap, 2 x side bolt with nut and washers, 2 x pulling bolt extension, 2 x extensions for pulling devices, 6 x adaptors.
Check Stock

OTC Tools 6981 Blind Hole Puller Set with Storage Case

  • OTC's 6981 Blind Hole Puller Set is a versatile solution for blind or "hidden" bearings in machinery and equipment commonly found on the factory floor....
  • Innovative expanding collets are placed through the bore of part to be removed then expanded with an actuator pin so that the lips of the collet....
  • The unique design of the pin adapter allows the option of using a slide hammer to pop the bearing or bushing from it's seat, or use with a pulling....
  • 5 Collet/Pin combinations: .300 to .350 inch (1.5 inches reach), .350 to .438 inch (1.5 inches reach), .438 - .563 inch (1.75 inches reach), .563 -....
  • Forged and/or machined at OTC's factory in Owatonna, MN.
  • includes easy to read component application chart and instructions.
Check Stock

Prokomon 13 Pcs Embedded Bearing Puller Kit for 6004-6010 6201-6206 6300-6302 Insert Wheel Bearing Removal Tool with 6 Pcs Ball Ended Threaded Puller Adaptors

  • ◇ Embedded Bearing Puller --- The bearing puller is used to dismantle automotive bearings. When a normal puller cannot remove the bearing, using this tool can help you complete the removal task..
  • ◇ Applicable ISO Bearing Sizes ---The wheel bearing removal tool is suitable for ISO bearings of sizes 6004-6010,6201-6206 and 6300-6302..
  • ◇ High Quality Materials --- Bearing puller tools are made of hardened and tempered steel, chemically plated black for excellent corrosion resistance and improved service life, providing you with long service..
  • ◇ Easy To Use --- First choose the right slider, put the slider into the bearing housing ring, rotate it 90 degrees, install the right post, then install the crossbeam and the top screw, turn the screw clockwise and pull out the bearing..
  • ◇ 13 Pcs Set--- Bearing removal tool pack contains centre screw thread cap,6 x ball ended threaded puller adaptors,2xleg extensions,and puller yoke with centre screw and twin arms..
Check Stock

OSBUN Motorcycle Spanner Wheel Removal Change Tool Wrench Set Compatible with Africa Twin CRF1000L/ADV 2016-2020 Anodized Aluminum (Red)

  • 【Function】This set can easily remove/install Gimbal bearings and alignment tools for engine alignment..
  • 【Features】This set includes eye bolts, so you can hang alignment tools. The blind hole puller is locked in the inner ring of the bearing. The tool makes it easy to pull the bearing, just use a wrench to turn the end of the tool to pull the bearing. Volvo's sliding hammer jaws no longer have the trouble of being stuck and broken..
  • 【Fitment】Fits for Mercruiser Alpha, Alpha 1, MR, bravo's, OMC cobra's and Volvo..
  • 【High Quality】This set made of high standard carbon steel which can withstand corrosion, rust and impact, with nice black Oxide finish, ensures an unparalleled long lifespan..
  • 【Note】A hole needs to be drilled in the alignment tool to install the universal bearing driver..
Check Stock

YOTOO Bearing Pullers Set 5 Ton Capacity, Bearing Separator Kit

  • HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool..
  • COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs..
  • VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully..
  • WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals.
  • WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us..
Check Stock

YOTOO Bearing Puller Set 5 Ton Capacity, Bearing Separator Kit

  • HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool..
  • COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs..
  • VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully..
  • WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals.
  • WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us..
Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

8MILELAKE Rear Axle Bearing Puller Extractor Installer Set Axle Bearing Removal Remover Tool Kit

  • [APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively..
  • [EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case..
  • [DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life..
  • [SIZE]: The bearing puller remover set includes fittings for main bearing tube: Small: 1" to 1-7/8.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set

  • The OTC blind hole bearing puller set is for those jobs requiring an internal pull.
  • set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications.
  • Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer.
  • Includes a 2-1/2 pound slide hammer with a T-handle.
  • Blow-molded plastic storage case keeps set contents organized and protected from loss.
Check Stock