Top Blow off Valve Diaphragm

Scubapro MK19 EVO/D420 Dive Regulator System

  • The MK19 EVO first stage with air balanced diaphragm is paired with the next-generation D420 balanced second stage for natural breathing and diving comfort in all dive scenarios..
  • Air-balanced Progressive Flow Control Valve delivers abundant airflow with an natural smoothness comparable to breathing above water..
  • Inner winglets within the D420's case direct airflow towards the exhaust valve dramatically improving exhalation effort, while a diaphragm lower in the casing takes advantage of the pressure gradient in the upright position for easier breathing..
  • The Dive/Pre-Dive System adjusts the direction of the airflow right out of the valve by adjusting the thumb tab switch on top of the casing..
  • Ideal for waters containing lots of suspended particles or silt, the compact MK19 EVO first stage's air-balanced diaphragm delivers effortless airflow unaffected by depth, tank pressure, or breathing rate..
Check Stock

Forged Stainless Steel Diaphragm Valve 316l Tri-Clamp Diaphragm Valve Silicone Seal 1.5 Inch for Controlling Ultra-Pure Sterile Corrosive Or Abrasive Fluids

  • ♛ SPECIFICATION - medium temperature: -10°C~+150°C.
  • sealing material: EPDM, PTPE, silicone resin.
  • surface polishing accuracy um: external Ra .
  • ♛ CONTROL FLUID - This forged/cast stainless steel diaphragm valve is suitable for controlling ultrapure, sterile, corrosive or abrasive fluids..
  • ♛ WORKING PRINCIPLE - stainless steel diaphragm valve is sealed from harsh fluids by high-quality neutral chemical diaphragms for a variety of applications..
  • ♛ APPLICABLE PLACES - The stainless steel diaphragm valve can be used in different fields such as food, beverage, pharmaceutical, biotechnology, semiconductor industry and so on..
  • ♛ THE PACKAGE CONTAINS - 1 valve.If you have any questions, you can contact KOUGER customer service, we will give you a satisfactory answer within 24 hours!.
Check Stock

NNiKQ Blow Off Valve Noise Turbo Sound Whistle Simulator Muffler Tip Car Accessories D

  • 【Made of high-quality aluminum】lightweight and durable. Easy to install on the car's tailpipe. If the car is installed in the tail throat and does not sound, it may be that the airflow of the car is not large enough and not concentrated enough to blow the whistle. You can install it outside and use the wind. Because the airflow of the wind is larger than the airflow of the car, it is easier to blow up..
  • 【Sound】Use a turbine system or a blow valve to make your vehicle sound like a turbocharged vehicle..
  • 【Wide range of applications】Make your vehicle sounds like a turbo vehicle with the turbo system or blow-off valve. Applicable to all kinds of cars, motorcycles and racing cars..
  • 【Easy to install】Universal Fits for all vehicle..
  • You Will Get】Aluminum turbo sound simulator whistle x 2 & 100% Satisfied guarantee..
Check Stock

Cozyel Air-Operated Diaphragm Pump Double Diaphragm Pump 1-1/2 inch Inlet & Outlet Air Diaphragm Pump Dual Diaphragm Air Pump Aluminum Alloy 44 GPM Max 115PSI QBK_40L

  • Air-Operated Double Diaphragm Pump 12GPM 1-1/2Inch Inlet And Outlet. The diaphragm pump features an externally serviceable air distribution system and all-bolted construction, with convenient operating, are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc..
  • A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-off valves) to pump a fluid..
  • Good abrasion resistance and heat resistance..
  • Rugged construction - resists corrosion for reliable performance and long life.Bolted construction is designed for leak-free fluid handling..
  • Easy access to ball checks and fluid caps for maintenance and repairs..
Check Stock

Sunxenze Air Duster Blow Gun with 5 Meter Long Coil PU Air Hose,Air Tank Blow Gun Kit,Blue

  • This air duster blow gun is a professional quality tool, easily gets into tight spaces..
  • Heavy Duty Truck Air Duster Blow Gun, For use on trucks with air tank systems, the air blow Gun kit is used to clean from the Cab to the Sleeper or clean your element air filter or anything else..
  • Polyurethane (PU) Air Hose Outer Diameter:6mm.
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more..
Check Stock

Sunxenze Air Duster Blow Gun with 5 Meter Long Coil PU Air Hose,Air Tank Blow Gun Kit,Black

  • This air duster blow gun is a professional quality tool, easily gets into tight spaces..
  • Heavy Duty Truck Air Duster Blow Gun, For use on trucks with air tank systems, the air blow Gun kit is used to clean from the Cab to the Sleeper or clean your element air filter or anything else..
  • Polyurethane (PU) Air Hose Outer Diameter:8mm.
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more..
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Flexible Operation Clamp Valve Rust-Resistant Sampling Valve Petroleum for Metallurgy Chemical Water Heating

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

Clamp Valve Small Fluid Resistance Sampling Valve 304 Stainless Steel Quick to Uninstall for Chemical Petroleum

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

ANDO RACING Blow Off Valve Spacer, Blow Off Valve Adaptor BOV Compatible with VW AUDI 2.0T TSI TFSI MK5 GTI B7 A3 A4 TT Diverter DV

  • 【Fitment】Compatible with 2006-2013 Volkswagen and Audi 2.0t FSI and TSI engines. Engines available for: Jetta, GTI, GLI, Passat, Tiguan, A3, A4, Q5.
  • 【Function】This blow off valve spacer will give your vehicle the traditional BOV sound will retaining the stock DV.
  • 【Features】Matched with the original electronically controlled solenoid valve and adopts O rings to achieve a perfect seal.
  • 【Material】The blow off valve spacer is made of high quality aluminum. light in weight and durable.
  • 【Service】We offer one year warranty for the spacer. If you have any questions, please contact our team.
Check Stock

Sampling Valve Quick to Install Small Fluid Resistance Clamp Valve Water Heating for Metallurgy Petroleum Chemical

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

XS-Power Tial 50mm BLOW-OFF VALVE STAINLESS STEEL (SS304) WELD ON FLANGE With O-RING

  • 【SUIATBLE FOR】-- Allows a convenient way to mount a for Greddy blow off valve to a SSQV adapter, suitable for converting the for Greeddy blow off valve flange to for HKS SSQV..
  • 【PREMIUM QUALITY MATERIAL】-- Made of high quality aluminum material, rugged, anticorrosion and durable..
  • 【SIMPE INSTALLATION】-- Easy to install, no cutting or welding required, direct bolts on..
  • 【PERFECT REPLACEMENT】-- Original standard, directly replace the old or broken BOV bypass flange..
  • 【DEPENDABLE TO USE】-- Conform to strict quality control standards, dependable to use..
Check Stock