Top Bltouch Vcr10s Pro

CR Touch 2023 Upgrade Noiseless Auto Leveling, with Beginner Software Pack, Creality 3D Printer Bed Leveling Sensor Kit for Ender 3 Pro/ Ender 3 V2/ Ender 3/ Ender 5/ Ender 5 Pro

  • 【Suitable for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers】The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer...
  • 【Independent Development】Compared with traditional BLTouch or 3D Touch, CR Touch is upgraded to a metal probe with noise-reducing silicone ring. 360° translucent protective shell makes CR Touch safer and more exquisite. Positioning accuracy ≤0.04mm, Automatic detection and leveling, can be reused for over 100,000 times..
  • 【Strong compatibility】CR Touch 3d printer auto leveling, Compatible with PEI / sticker bed / glass bed / metal bed.
  • 【Easy to install and easy to use】An SD card comes with our product, which contains all you need for the installation, so that the CR Touch is a plug-and-play upgrade part for your 3D printer..
  • 【After-sales Service】If you encounter unsolvable problems during installation and use, feel free to contact us, the technologist will provide you with detailed solutions within 24 hours..
Check Stock

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • ...extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
  • Upgraded in all aspects: 4.3 inch colour touch screen for the ender3 s1 pro installed and it takes an user-friendly UI face. LED light allows you to print in the dark environment. The steel spring PEI sheet bed can help you slove the adhesion problem, no need shovel anymore. Filament detection sensor installed and power loss recovery function also supported..
Check Stock

TOPPING D10 Balanced Mini USB DAC CSS XMOS XU208 ES9018K2M OPA2134 Audio Amplifier Decoder Sliver (Renewed)

  • ♫ Upgraded version TOPPING D10s USB DAC: Customized Thesycon driver + XMOS XU208 + ES9038Q2M + OP..
  • ♫ Automatic power on/off: Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC..
  • ♫ Audio format andsampling rate indicator: D10s can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ♫ Multiple connections: D10s could connect with your active speakers. It could connect to power/headphone amp. If you have a better DAC , you can connect the coaxial /optical output of D10s to your DAC , then D10s serves as a USB interface ..
  • ♫ OP-AMP Rolling, D10s has OP amp socket, Diyer could change the OP amp to get different sound. Any question, please contact the after service team..
Check Stock

GE Composite Audio/Video Cable, 12 ft. RCA Style Plugs 3-Male to 3-Male, Low Loss, for TV, VCR, DVD, Satellite, and Home Theater Receivers, 33611

  • For DVD players, DVRs, VHS, VCRs, TVs, satellite receivers, and home theater receivers – including mini-dish satellite and Dolby Pro Logic receivers.
  • Can connect 1 VCR or camcorder to a second VCR for copying of video tapes.
  • Ultra low-loss cable fused to two shielded audio cables with 3 RCA plugs at each end.
  • RCA Ends: Video (Yellow), Audio Right (Red), and Audio Left (White).
Check Stock

GE Composite Audio/ Video Cable, 6 ft. RCA Style Plugs 3-Male to 3-Male, Low Loss, for TV, VCR, DVD, Satellite, and Home Theater Receivers, 23216

  • For DVD players, DVRs, VHS, VCRs, TVs, satellite receivers, and home theater receivers – including mini-dish satellite and Dolby Pro Logic receivers.
  • Can connect 1 VCR or camcorder to a second VCR for copying of video tapes.
  • Ultra low-loss coaxial cable fused to two shielded audio cables with 3 RCA plugs at each end.
  • Rca ends: video (Yellow), Audio right (red), and Audio left (white).
Check Stock

Topping D10s HiFi DAC USB DAC XU208 ES9038Q2M DSD256 32bit/384kHz Coax/Opt/RCA Output Mini Desktop Audio Decoder(Black)

  • ♫ Upgraded version TOPPING D10s USB DAC: Customized Thesycon driver + XMOS XU208 + ES9038Q2M + OP..
  • ♫ Automatic power on/off: Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC..
  • ♫ Audio format andsampling rate indicator: D10s can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ♫ Multiple connections: D10s could connect with your active speakers. It could connect to power/headphone amp. If you have a better DAC , you can connect the coaxial /optical output of D10s to your DAC , then D10s serves as a USB interface ..
  • ♫ OP-AMP Rolling, D10s has OP amp socket, Diyer could change the OP amp to get different sound. Any question, please contact the after service team..
Check Stock

3 in 1 Wireless Charging Station for Multiple Devices Qi Wireless Certified - Apple Watch Charger 7,6,5,4,3,2 & AirPods Pro, iPhone13 12 11 Pro Max Xs X Xr 8 (with QC 3.0 Adapter)

  • ... Plus/S9/S8, GOOGLE Pixel/ 3Pixel 3XL/Pixel 4/Pixel 4XL, & other Qi-enabled phones like LG/OnePlus/Huawei/Realme, etc..
  • SMART CHARGING INDICATOR - A clear indicator LED light on the base of fast charging dock shows the status of charging. The LED lights flash for 3s when a power source is connected, then turn on for 10s if the charging dock recognizes your phone. 10s after entering charging mode the LED light automatically goes off to allow for better quality sleep..
  • WIDER CHARGING AREA - A dual-coil design ensures a wider charging area allowing you to charge your phone in any orientation. A QC 3.0 adapter has to be used. (UL certified QC 3.0 included) to charge 3 devices at the same time. Your new fast wireless Qi charger can be used straight out of the box!.
  • MULTI-PROTECTION - Approved by Qi, CE, FCC, & ROHS. The MIROMTEC Qi wireless charger pad comes with built-in temperature control, voltage protection, & automatic shut-off in addition to foreign object detection. A silicone-coated cover makes the charger electrostatic-proof & smooth to the touch..
  • SAVE SPACE - Tired of multiple cords? Our iPhone charging station requires a single cable and QC 3.0 adapter (both included) thereby saving valuable space on your desk..
Check Stock

BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah V1.0 for Creality Ender3 with BLTouch Extension Cable Kit

  • ⭐【Main Control Chip Features】This new SKR Mini E3 V2.0 motherboard uses the STM32F103RET6 main control chip, and its flash memory size is 512K..
  • ⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0....
  • ⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation..
  • ⭐【BLTouch V3.1】BLTouch is an auto leveling sensor for 3D Printers based on open-source.Simple, Smart, High-precision.It could work with any....
  • ⭐【After Sales】If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

3 in 1 Wireless Charging Station for Multiple Devices - Qi Certified Charger Dock - Compatible with Apple Watch Charger 6,5,4,3,2 & AirPods Pro, iPhone 12 11 Pro Max Xs X Xr 8 (with QC 3.0 Adapter)

  • ... GOOGLE Pixel/ 3Pixel 3XL/Pixel 4/Pixel 4XL, & other Qi-enabled phones l ike LG/OnePlus/Huawei/Realme, etc..
  • SMART CHARGING INDICATOR – A clear indicator LED light on the base of fast charging dock shows the status of charging. The LED lights flash for 3s when a power source is connected, then turn on for 10s if the charging dock recognizes your phone. 10s after entering charging mode the LED light automatically goes off to allow for better quality sleep..
  • WIDER CHARGING AREA – A dual-coil design ensures a wider charging area allowing you to charge your phone in any orientation. A QC 3.0 adapter is required for fast charging (UL certified QC 3.0 included) for rapid charging. Your new fast wireless Qi charger can be used straight out of the box!.
  • MULTI-PROTECTION – Approved by Qi, CE, FCC, & ROHS. The MIROMTEC Qi wireless charger pad comes with built-in temperature control, voltage protection, & automatic shut-off in addition to foreign object detection. A silicone-coated cover makes the charger electrostatic-proof & smooth to the touch..
Check Stock

Not for Thick Case! Car Phone Mount Holder Horizontal Air Vent for Samsung Galaxy S22 Ultra, S20 Ultra Plus, S21 FE, S22 Plus, A52 5G, A13 5G, A32 5G, A42 5G, A03S A11 A21 A51 A71, Note 20, 10, 9

  • Universal Compatibility: Support screen size from 4 6.9 inches smart phones or electronic devices. such as Samsung Galaxy S20 Plus, Note 10 Plus, Note 10 Lite, S10 Lite, A11 A71 A10S A20S A20 A10 A50 A01 A10e A20e, Note 10, S20, S9 Plus, S10 S9 / iPhone 11 Pro Max, XS Max, iPhone 12, 11, 10, XR, 11 Pro, 12 Pro / LG V60 V50 V40 V35 G7 ThinQ,Stylo 6, 5, 4, K51, Morola Mo Edge, G8, G7, G6, G8 Power Play Plus, G7 Play Plus, G6 Plus Play, E6, E6 Plus, E6S, E5, E5 Plus Play, Z3 Play, Z3.
  • Easy Operation: The gravity linkage design allows you easily lock and release your phone with one hand. Easily put in or take out in one second even it is charging. The car grips mount comes with a quick release butn, you can quickly install it at the vent of your car or remove it..
  • AuLock Design: After placing your Android phone, the gravity system makes our vehicle phone holder aumatically lock your mobile phone. When you get a call, notification, or GPS navigation, never look down at your phone screen again..
  • Steady and Safe: The triangle shaped by the three arms will hold your phone firmly and you don’t need worry about the deceleration zone, bumpy road, emergency brake or quick turns..
  • Protected Function: The hug buddy phone holder is made of high quality ABS+PC, it wil....
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock