Top Blue Stn Lcd Module

LCD Module 2004A 5v IIC I2C LCD Display Module, Blue Screen White Character Serial Peripheral Interface

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • It is fantastic for Arduino based project..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory

  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.
  • 2004 LCD smart controller for 3D printer，Supports for RAMPS 1.4 control board.
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer.
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
Check Stock

LANTRO JS 1.14 Inch TFT Color LCD Display Module ST7789 8Pin IPS 135x240 TFT Display Screen Module

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0 -108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V

  • Good performance: thanks to the DSP and PLL technology, these multi-functional stereo FM transmitter modules can provide you with quality stereo.
  • Practical design: the FM transmitter module has a blue backlit LCD display, allowing you to clearly see the value in a dark environment.
  • The power consumption is extremely low, and noise interference is small.
  • Suitable for: this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz.
  • Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press.
  • Wide uses: the digital FM transmitter module can be applied to FM wireless, USB PC broadcast, maternal and child monitoring, wireless microphone and much more.
  • Warm notice: please confirm whether the power polarity and power voltage are correct before turning on the power.
  • If the input voltage exceeds 5V or the positive and negative poles of the power supply are connected reversely, it may cause permanent destroy to the module.
  • Do not touch the components on the back of the module while working, so as not to affect the normal operation of the module.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

DEVMO LCD 12864 Version Graphic Smart Display Controller Module Board with Adapter and Cable Compatible with RAMPS 1.4 Reprap 3D Printer Kit Mendel Prusa Ar-duino

  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment,....
  • Small and light appearance, it is easy and convenient to use.
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD....
  • This version is an upgraded version of reprap smart controller.
Check Stock

HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color

  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display..
  • LCD 12864 graphic smart display module with blue backlight, Small and light appearance, it is easy and convenient to use..
  • Using a large screen 12864LCD (3.2'), it can support 8 GB..
  • Print your 3D designs without PC, just with a g-code design stored on the SD card..
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc..
Check Stock

Character LCD Module 16x2 RGB Backlight for Arduino

  • Displays 2-lines X 16-characters, Blue display with white letters which provide Wide viewing angle and high contrast..
  • Operates from 5V DC so you can connect directly to arduino board..
  • Built-in industry standard HD44780 equivalent LCD controller..
  • Comes with hookup and operation documentation..
Check Stock

4Pcs LCD1602 1602 LCD Module Green Screen 16x2 Character LCD Display with IIC I2C Serial Interface Adapter Module

  • 1602 lcd screen can display 2-lines x 16-characters with built-in industry standard HD44780 equivalent LCD controller.
  • LCD1602 1602 LCD module working voltage: 5V.
  • To come with a potentiometer, which is applied to adjust backlight and contrast.
  • It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • LCD1602 1602 LCD module compatible with copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices..
  • 1602 display function: LCD display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on..
Check Stock

HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter

  • HD44780 2004 LCD 20x4 2004A Character LCD Display Module.
  • Fully assembled and tested Serial LCD 20x4 Module.
Check Stock

Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560

  • IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
  • Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
  • Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
  • With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
  • Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
Check Stock

Gel Heating Machine,Portable PRP PPP Gel Maker Heater,Plasma Bio-Filler Equipment,Instrument Autologous Serum Filler with Digital Display for Laboratory Hospital

  • ...~100℃,Time range: 1min~99h59min/∞,Temperature accuracy: ≤±0.3℃,Display accuracy: 0.1℃,Heating time: ≤12min (25℃ to 100℃),Power: 150 watts,Fuse: 250V 3AФ5×20,Size: 10x7.7x6in,Net weight: 2.5 kg..
  • 【LCD Display】Portable PRP PPP gel maker heater has easy module replacement, easy to clean and disinfect, beautiful appearance, blue LCD display instant parameter information..
  • 【High Precision, Automatic Recovery Function】Optional power failure automatic recovery function, automatic start running function, improve efficiency, intelligent algorithm, ensure the whole process temperature control accuracy ≤ +03C, effectively reduce the experimental error..
  • 【Multiple Protection】Plasma bio-filler equipment can ensure the stability of long-term operation and safety in the case of unattended operation, comply with CE standards, and support the custom calibration function of module classification..
  • 【Wide Range of Application】Instrument autologous serum filler is the best designed product controlled by microprocessor. It can be widely used for sample storage and re....
Check Stock