Top Bluetooth Embedded Module

Electronic Cabinet Lock Smart Cabinet Keyless Lock Fingerprint Bluetooth APP Remote Unlock Security Device for Drawer Safe File Box

  • 【 Easy to Install and Set up】Keyless cabinet lock, support fingerprint unlocking and Bluetooth APP remote unlocking. Easy to install. The manual....
  • 【Quick Unlock】Adopts high‑resolution fingerprint module for fast(in 0.5s) and accurate fingerprint recognition, and fingerprint capacity can get....
  • 【Smart unlock】Support remote authorization to unlock, selectable permanent authorization/periodic authorization/temporary authorization.Support....
  • 【AI Intelligent Learning】: The fingerprint lock is embedded with AI intelligent chip and has a self-learning algorithm. The fingerprint will be....
  • 【Wide Application】This cabinet locks can be used widely for Wooden cabinet, drawer, storage box, wardrobe, dresser, wine cabinet, nightstand,....
Check Stock

FLIR Vue Pro R Radiometric 640x512 Pixels/13mm Lens/30Hz Camera  Drone Accessory

  • Captures accurate, non-contact temperature measurements from an aerial perspective and saves images with calibrated temperature data embedded in every....
  • Vue Pro R captures regular JPEGs and fully radiometric R-JPEGs that can be fully analyzed in FLIR Tools thermography analysis and reporting software..
  • Vue Pro R comes with a built-in, low-power Bluetooth module, so you can easily configure your camera with our custom iOS or Android apps before you....
  • Change color palettes, set your image optimization features, configure your PWM inputs, and start recording all without lugging a computer to the....
  • Validated export licenses must be obtained from the U.S. Department of Commerce prior to export or re-export of such devices outside of the United....
Check Stock

ACEIRMC 4pcs AT-09 Bluetooth 4.0 Transceiver BLE Module Serial Port CC2541 HM-10 MLT-BT05

  • The AT-09 is a module that contains a BLE chip (CC2541)..
  • This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with for iPhone/iPAD, IOS 6 or Android 4.3 above devices..
  • This module allows to perform serial communication with the BLE chip thanks to an Rx and a Tx pin..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
  • The module is also very similar to the HM-10 module and is also compatible with it so if you have some experience with the latter, you will get started quickly with the AT-09..
Check Stock

HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock

STEELMAN PRO 78752 Bluetooth ChassisEAR Lite Kit

  • NO WIRES - Bluetooth connected transmitter attaches to clamp or probe to wirelessly transmit data to a connected device.
  • COLOR CODED MODULE - Kit includes a single vibration and noise sensor clamp and Bluetooth transmitter module with a color coded silicone rubber boot.
  • STETHOSCOPE PROBE - Aluminum probe works with the Bluetooth transmitter as an electronic stethoscope for hands-on diagnostics.
  • USB BLUETOOTH DONGLE - Includes a USB Bluetooth dongle for use with laptop PCs that do not have built-in Bluetooth capability.
  • EARBUD HEADPHONES - Earbud style headphones plug into 3.5mm audio jack on smart device.
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

MP3 WMA Decoder Board Audio Wireless Bluetooth 4.2 Module 12V, USB/SD Card/Bluetooth/FM Switching Support

  • [BLUETOOTH 4.2 SUPPORT]The mp3 module support Bluetooth 4.2. With blue backlight function, it support USB sound card function and Micro USB 5V power input. And also has power off memory function---memorize playing songs and volume before power off..
  • [SUPPORT FOLDER SELECtION FROM secure digital memory card OR USB DISK ]The mp3 module support folder selection and then music playback (remote control operation or panel operation) from secure digital memory card or USB disk..
  • [USB/SD CARD/BLUETOOTH/FM SWITCHING SUPPORT]The mp3 module support USB/SD card/Bluetooth/FM switching. Conversion prompt (Signal, Chinese, English voice prompt optional)..
  • [MULTIPLE MUSIC FORMATS SUPPORT]The decoder supports MP3/WMA/WAV/lossless APE/FLAC format music. MP3 Songs: 2-320kbps, WAV/WMA: 1411kbps and below..
  • [MULTI-FUNCTION SUPPORT]The mp3 module support secure digital memory card / USB flash switching, songs selection, volume adjustment, EQ, play /pause, stop, mute, shutdown, direct election song..
Check Stock

DSD TECH HM-10 Master and Slave Bluetooth 4.0 LE iBeacon Module Compatible with iPhone and iPad and Android 4.3 or Later

  • Original HM-10 module, DSD TECH brand guarantees and we accept refund without any excuse..
  • Bluetooth master and slave module, Through the AT command, you can set this bluetooth module to the master mode can also be set to slave mode, even in iBeacon way work . .it also Supports Apple Notification Center Service (ANCS).
  • Compatible with iOS 7 and later and Android 4.3 or later.
  • Working voltage 3.3V ,Default rate of 9600..
  • DSD TECH back this Bluetooth 4.0 Master and Slave 2-in-1 module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours..
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (4pcs)

  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
  • ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card.
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash.
  • Support image WiFi upload and Support TF card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

DSD TECH HM-10 Master and Slave Bluetooth 4.0 LE iBeacon Module Compatible with iPhone and iPad with 4 PIN Dupont Cable for Arduino

  • Original HM-10 module, DSD TECH brand guarantees and we accept refund without any excuse..
  • Bluetooth master and slave module, Through the AT command, you can set this bluetooth module to the master mode can also be set to slave mode, even in iBeacon way work . .it also Supports Apple Notification Center Service (ANCS).
  • DSD TECH 4 PIN base Board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project or other DIY project.
  • Working voltage 3.6 V to 6V,Default rate of 9600.There are 4PIN dupont cable in the package.
  • DSD TECH back this Bluetooth 4.0 Master and Slave 2-in-1 module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours..
Check Stock

3.5MM AUX USB Interface Bluetooth Module Receiver Cable Adapter for BMW Car Wireless A2DP Audio Input for Peugeot/Hyundai/kia

  • Compatible with :All Vehicles have AUX USB Interface , the AUX Port provides audio , and USB port support 5V..
  • The bluetooth module is made for BMW Peugeot VW ect vehicles which has 3.5mm AUX and USB Interface..
  • If there is 3.5mm AUX and USB socket,our bluetooth module will work..
  • Just plug the AUX connector into the socket back of your radio..
  • Pair your phone or mp3 or pad with bluetooth to the module, this name: jierui5908..
Check Stock

2X Micro USB Charging Port Dock Power Connector Module Replacement Compatible with UE Boom 2 Bluetooth Speaker

  • USB Charging Port Dock Power Connector Module Replacement Compatible with UE BOOM 2 Bluetooth Speaker.
  • Tips: This is USB Charging Port Dock Power Connector Module replacement to replace your old damage USB Charging Port Dock Power Connector Module,....
  • Broken your USB Charging Port Dock Power Connector Module, don't need to change new machine, just buy this item and replce your damage USB Charging....
  • Compatible with: UE BOOM 2 Bluetooth Speaker (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
Check Stock