Top Boat Fuel Line

5/16 816296Q2 Inline Fuel Filter for 40HP 50HP 115HP 150HP Mercury Marine Outboard Engines 35-816296Q2 Sierra 18-7830 35-816296K2 Replaces Johnson/Evinrude 398318 Yamaha 65W-24251-10-00

  • Replace Part Number: 35-16494-1 , 35-816296T1 , 35-816296-1 , 35-816296Q2, 816296Q1, 134301, 164941, 35-816296B1, 35-816296K2, 35-816296K2, Replaces Yamaha 65W-24251-10-00, 65W-24251-00-00.
  • Fuction: Replacement fuel filter cartridge removes damaging or performance robbing fuel born contaminants.Filters performance robbing particles before they can get to your engine. Don’t let water moisture or other fuel contaminants rob horsepower from your engine..
  • Fitment: Fit Mercury 3-Cylinder 2-stroke outboard engines: 40hp 50hp 55hp 60hp BIGFOOT 70hp 75hp 80hp 90hp. This replacement in-line fuel filter fits 8 hp through 15 hp Mercury and Mariner 4-stroke outboards (serial numbers USA-0T003862 to 1B727495)..
  • Suitable Size: 5/16" in/out fit the fuel line perfect. Small enough to fit under the cowling of the motor, but big enought to filter a lot of fuel..
  • Tips: Yearly maintenance on the boat motor required this filter. Please change this filter every year along with the lower fuel and water separator filter to keep the particles out of the carbs in the outboard..
Check Stock

Tektall 2 Pack 10mm 3/8" Aluminum Alloy Non-Return One Way Check Valve for Fuel Line Oil Petrol Diesel,with 4Pcs Universal Adjustable Hose Clamps.

  • 【Wide Applications】 This one-way check valve is installed in many low pressure fuel systems / diesel / Carburetors and bio fuel systems where fuel to only flow one way, suitable for petrol, diesel, water, oil. It universal can be used on any UTV, quad, dirtbike, jetski, waverunner, boat, truck, car, motorcycle, tractor, camper, lawn mower, blower, pressure washer, etc..
  • 【Working parameters】 The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar) Operating temperature: -30 ℃ - 130 ℃.Note:This fuel non return one way check valve cannot be used in methyl alcohol because formic acid will be produced while it is powered on, which will lead to the uselessness..
Check Stock

Five Oceans FO4285 Marine Boat Fuel Line, Outboard Fuel Line with Primer Bulb for Yamaha/Mercury, 2 Quick Connectors, 3/8 Inch Hose x 6 Ft, Reinforced EPA/CARB, Compatible Ethanol Blended Fuel

  • Package Includes a Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Yamaha/Mercury Female Quick Connectors and 2 Stainless Steel Hose Clamps.
  • Compatible with All Yamaha/Mercury Engines and Fuel Tank Models (Mercury Before 1998). Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
  • Multi-layer Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
  • Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
  • Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Portable Boat Fuel Tank, 6gal - 24L Outboard Marine Portable Fueling Tank with Hose Connector Replacement for Marine Outboard Motor Plastic Fuel Tank

  • Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry..
  • Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings and 1* primer bulb.Note: Please check whether the four screws are tightened before use. If not, you need to tighten the four screws around the hose connector flange..
Check Stock

Portable Boat Fuel Tank 12L 3 Gallon Marine Portable Fueling Tank Replacement for Marine Outboard Motor Fuel Tank

  • ...ight), which helps to form a smooth fuel flow, thereby minimizing leakage..
  • Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry.Fit for Small to Large Boats, Inflatables, Tinnies, Canoes and Kayaks..
  • Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings(As shown in the picture)Note: Please check whether the four screws are tightened before use. If not, you need to tighten the four screws around the hose connector flange..
Check Stock

Seamax Ocean430T Commercial Grade Inflatable Boat, 14ft. x 6.4ft, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 35HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose (Red)

  • Seamax Ocean430T Spec: Overall length 14ft, beam 6.4ft, inner dimensions L10.0ft x W3.1ft.
  • Boat dry weight 250Lbs, carry 10 passengers, max loading 2159Lbs.
  • Pontoon diameter 19.7 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa).
  • Short shaft 16”/ 82° & reinforced transom, Max 35HP motor, suggested 20-30HP.
  • Manufacturing Standard: Commercial grade boat fabric for main construction.
  • Four layers overlapped chamber seam structure (Feature Code: FOS).
  • Transom Stabilizer & Reinforcement Design (TSR).
  • Seamax special feature also including: Dual Heavy duty life lines.
  • Heavy duty boat bumper around the boat and bottom.
  • Heavy duty D-Ring & Towing Ring patches..
  • Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings.
  • Transom to pontoon adapter fully reinforced, marine sealant is applied which resists le....
Check Stock

BOAT MARINE DISPOSABLE IN LINE FUEL FILTER 3/8 SEE THRU CAPSULE

  • BOAT MARINE DISPOSABLE IN LINE FUEL FILTER 3/8 SEE THRU CAPSULE.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

Portable Boat Fuel Tank 24L 6 Gallon Marine Outboard Motor Fueling Tank Plastic Tank Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes (6 Gal Fuel Tank)

  • 【High Quality Material】This boat fuel tank is made of high density polyethylene, low permeability, anti-aging, impact resistance, won't rust, crack or chip, it can naturally rebound without permanent deformation after encountering an impact..
  • 【Portable Design】 The three-dimensional texture surface not only increases the aesthetics of the gas can, but also optimizes the feeling of holding a hand, making the force is even and the hand is not restrained. Equipped with an I-shaped lifting handle, which is more ergonomic, convenient and fast, easy to carry and store..
  • 【Easy to Fill】Portable boat gas tank features a fine mesh input spout, so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
  • 【Convenient Design】The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling. Marine portable fuel tank includes handle to easily carry fuel wherever you need it..
  • 【Wide Application】Fuel tank size: 11.8*....
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock