Top Boat Steering Wheels

Boat Steering Wheel Cover Microfiber Leather 13-13.5 inch (Black Red)

  • Notice: this is only for the boat and golf cart ,can’t for the car, ,only the cover not with the wheel..
  • Suitable:fit for most boat steering wheels with outer diameter of 13-13.5”.
  • How to install:sometimes is diefficult to install for the tight and safety , need the big strength,1. Fit the top of the cover over the top of the wheel. Center the wheel before you start to install the cover.2. Stretch out both sides so that the cover fits over the wheel.3. Pull the bottom of the cover over the wheel.4. Use as much force as you can to get the final part of the over fitting snugly over the wheel..
  • if you can’t install for the smaller,you can placed the cover in extremely hot water and started pulling and tugging until it loosen up a bit. Then can easy to get it on..
  • SWEAT ABSORBENT&BREATHABLE – The precision drilling process enables the steering wheel cover to have strong air permeability and absorb sweat..
Check Stock

XMSound 5 Spoke 11\ Dia. Boat Steering Wheel,3/4\ Shaft,25 Degree Dish,304 Stainless Steel Steering Wheel with Black PU Foam (11\ with knob)

  • Material:Marine Grade Aisi 316 Stainless Steel.
  • Fits Oval Steering Wheels Tube with Rim Dia.from 5/8"-0.98" * 5/8"-3/4" （Please check the your Steering wheel Rim Dia. before purchase）.
  • Package Included: 1 Marine Boat Steering Wheel Knob, 1 Small Wrench.
  • Quicker Turning Response Enhanced sensitivity for use.
  • The mounting clamp is designed for an oval ring bar. if your wheel is round stock, you could reshaped the lower piece slightly with two pairs of pliers..
Check Stock

NA Steering Wheel Spinner Silicone Power Handle Steering Wheel knob No Tools Required Black

  • Universal: The steering wheel knob has been designed to be compatible with all types of cars and vehicles. The knob is designed to fit most car/boat/tractor/mower knob grips.
  • Good design and reliable quality: metal bearing, the bearing contains metal steel balls, which can rotate 360° freely and smoothly. The use of high-quality ABS silicone, non-slip and wear-resistant, both materials have a unique sturdiness and high durability, using a more even force, reducing the resistance of steering maneuvering.
  • It reduces the driver's discomfort caused by long hours of driving. Suitable for drivers who drive for long periods of time or for people with arm or shoulder pain (surgery, elderly people), they can make turns smoother, especially U-turns, stopping, merging more safely, and in general dealing with tight places. Spinners are of great help when performing difficult car maneuvers.
  • Installation: There is a rubber pad on the base of the steering wheel knob to protect your steering wheel, please measure your steering wheel to determine the removal or installation, for all steering wheels, these steering wheel sizes are within the range of extendable screw fasteners, just follow the instructions.
  • If you have any problems in the use of the product, you can cont....
Check Stock

DasMarine 5 Spoke 11\ Dia. Boat Steering Wheel,3/4\ Shaft,25 Degree Dish,304 Stainless Steel Steering Wheel with Black PU Foam (11\ Without knob)

  • The steering wheel are made from 304 Stainless steel,very sturdy.Awesome quality and construction add enough weight and momentum to make easier steering..
  • The Boat steering wheel is with the polyurethane(PU) foam grip, not too hard, not too soft, it fits your hands perfectly, and it is not nearly as slippery, even when covered in slime..
  • The Boat steering wheel is easy to install on the boat,fit the boat correctly,and the black center cap snapped into place correctly as well..
  • Dimensions: 11" Dia.,3/4" Shaft,25 Degree Dish,5 Spoke.
  • Package Included: 1 Set stainless steel boat steering wheel with PU form.
Check Stock

MARINE CITY 316 Stainless Steel Strong Durable Gloss Polished Finish Sport Boat Knob Wheel-Spinning Ball-Bearing Knob for Steering Wheel Marine Yacht Kayak Marine Boat Caravan with Cap

  • CONSTRUCTION: It is made of Stamped 304 Stainless Steel and Investment Cast 316 Stainless Steel..
  • DURABLE QUALITY: It is constructed with strong and sturdy quality Stainless Steel. It's finely polished with a smooth finish that provides maximum corrosion resistance and durability for long-term service..
  • DIMENSIONS: Fits Rim Size: A: 18.8mm*25.4mm (oval tube).
  • WIDE APPLICATION: It fits most steering wheels: Boat Yachts, Lawn Mowers, trucks, cars..
  • PACKAGE CONTENT: 1 Pcs MARINE CITY 316 Stainless Steel Sport Boat Steering Wheel Spinning ball-Bearing Knob with Cap..
Check Stock

Replacement Boat Steering Wheel 12-1/2 Inch Pontoon Boat Accessories Marine Aluminum 3 Spoke for Yacht Speedboat Cruiser

  • Universal Replacement Steering Wheel, it can fit for most bayliner boat, tracker boat, pontoons, bass boats, sea ray boat..
  • Sturdy structure. it is made of 3 aluminum alloy spokes, and the grip with soft PU foam cover..
  • Size, Outer Diameter is 12.5 inch, 3/4 inch tapered shaft..
  • Ergonomic design, it has three smooth finger grooves along the steering wheel..
  • Useful boat steering console accessories..
Check Stock

R RUR Boat Steering System Outboard Rotary Steering Kit with 16ft Boat Steering Cable and 13.5-Inch Stainless Steering Wheel for Boat

  • 【High-Performance Rotary Steering System】The boat steering kit comes with 16ft Steering Cable, 13.5" Steering Wheel, Swivel Helmet, Standard 3/4" Tapered Steering Axle, Hardware, 90 degree bezel kit..
  • 【High Quality Material】The outboard rotary steering kit is made of cast steel and 304 stainless steel seamless tube and corrosion resistant material, which is durable and stable. The rotary rudder is well welded, well polished, and of good size. The cables are made of stainless steel and high-quality rubber to ensure the surface is free from corrosion, rust, cracks and leaks and to keep the accessories shiny. Flat interface design, better and stronger marine steering system kit..
  • 【Easy To Install】Simple snap-in cables connect different mounting hardware to ensure quick installation. Please verify if the cable length matches your application..
  • 【Easy Operation】This rudder system is designed to minimize your effort to drive the boat and make the boat turn accurately to ensure you have a pleasant boating experience every time you use it..
  • 【Wide Application】This outboard steering kit is suitable for mechanical/manual steering of yachts, fishing boats, electric push boats and other water vehicles..
Check Stock

Boat Cleaner Wipes with UV Protection Boat Vinyl Cleaner and Protectant Car Leather Marine Boat Seat Cleaner Dashboard & Console Boat Cleaning Supplies Interior and Exterior Clean & Wash Products

  • QUICKLY CLEANS AND PROTECTS MULTISURFACES: Quickly wipe away dirt, oils, salt and grime while protecting against UV rays. These wipes can be used on Fiberglass, Vinyl, Plastic, Rubber, Leather, Chrome and other surfaces for boat & car cleaning..
  • UV PROTECTION AGAINST FADING AND CRACKING: Protectant wipes provide UV protection keeping your car dashboard, leather interiors, or boat vinyl seats and cushions looking better for longer. Works as a boat seat cleaner plastic restorer & polish wash..
  • REVIVES COLORS & LEAVES A MATTE FINISH: Our non-toxic, non-greasy formula is petroleum free and has a fresh lemon scent. It revives leather and vinyl, restoring richness to color. Unlike other boat cleaners the wipes don't require a towel or sponge..
  • GREAT ON CARS & WATERCRAFTS: Clean and protect with these wipes inside on dash consoles, steering wheels, sun shades and more. The perfect quick dashboard cleaner, boat vinyl cleaner and protectant, plastic cleaner, leather cleaner and protectant..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium products for interior & exterior car cleaning supplies, RV care & boat cleaning supplies. We stand behind your satisfaction and our Car Wipes or Boat Cleaner Wipes..
Check Stock

Homyl Stainless Steel 3 Polished Spoke Steering Wheel 350mm For Marine Boat

  • Boat Steering Wheel With Detachable Handle.
  • Supper Rusty Resistent Steering Wheel With Two Layers Of Surface Protection.
  • fits all standard 3/4" tapered shaft helms.
Check Stock

PLLP Inflatable Boat Launching Wheels Flipup Dinghy Wheeler Nylon Ribs Towing Wheels

  • Dimensions fixing plate 150 x 100mm 4 fixing holes - distance 132 x 82mm Overall Height 320mm Wheel diameter 145mm Wheel width 90mm.Suitable for boats up to 250lbs(110KG).
  • Lightweight and compact, easy to install Quickly mount to the bottom of your boat to move your boat on the beach or other ground.
  • Made of high quality graphite filled nylon resin for high corrosion resistance snug these launch wheels fit in behind the tubes and transom of even the smallest of craft without obstructing movement of the outboard motor..
  • Avoid damage to the ship due to tugboats, this trailer wheel has a steering wheel locking device.
  • 50mm fasteners ,nuts bolts and washers are supplied.
Check Stock

UANOFCN Inflatable Boat Launching Wheels Flipup Dinghy Wheeler Nylon Ribs Towing Wheels

  • Lightweight and compact, easy to install Quickly mount to the bottom of your boat to move your boat on the beach or other ground.
  • Made of high quality graphite filled nylon resin for high corrosion resistance snug these launch wheels fit in behind the tubes and transom of even the smallest of craft without obstructing movement of the outboard motor..
  • Avoid damage to the ship due to tugboats, this trailer wheel has a steering wheel locking device.
  • Dimensions fixing plate 150 x 100mm 4 fixing holes - distance 132 x 82mm Overall Height 320mm Wheel diameter 145mm Wheel width 90mm.Suitable for boats up to 250lbs(110KG).
  • 50mm fasteners ,nuts bolts and washers are supplied.
Check Stock

Amarine Made Boat Marine 5 Spoke 13-1/2 Inch Destroyer Steering Wheel with Black Foam Grip and Knob

  • 13.5'' Steering Wheel: Made of aluminum alloy and high-quality plastic. This boat hydraulic steering kit is anti-aging, corrosion-resistant, and high-density. The anti-slip wave design can make your operation more comfortable..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Aluminum Alloy Casing: Our hydraulic steering kit for boats features high-strength aluminum alloy casing ensuring wear resistance and corrosion resistance, and effectively prevent seawater erosion..
  • Compact & Neat: The hydraulic pump has a compact internal structure and a stylish exterior. The hydraulic pump of our boat steering system for boats rated to a maximum of 300 HP..
  • Wide Application: These boat steering parts are suitable for ships under 300HP horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock