Top Boat Wheels

(2-Pack) AR-PRO 6-Inch Boat Trailer Jack Wheels - Universal Fit Black Plastic Caster Wheels - Includes All Mounting Hardware - Suitable for Boat Trailer Jacks with 1 or 2 Wheels

  • 1 PAIR OF CASTER WHEELS FOR BOAT TRAILER JACK - This is a universal replacement for boat trailer jacks. Wheel dimensions are 5 5/8 diameter (6-inch nominal diameter), 2 inches width, and a 5/8 bore hole.
  • DURABLE PLASTIC CASTER WHEELS - Complements the marine boat trailer jack’s durability. Can withstand constant water exposure and can resist wear and abrasion from heavy use. Each caster wheel can support up to 1,200 lbs.
  • INCLUDES BOLTS, NUTS, BUSHING, AND WASHERS - This pack includes 2 caster wheels, 2 short axle bolts (with 2 nuts, 2 washers, and 2 sleeves), and 1 long axle bolt (with 1 nut, 1 washer, and 1 sleeve).
  • CORROSION-RESISTANT HARDWARE - All mounting hardware has a corrosion-resistant finish for enhanced longevity in coastal environments.
  • SUITABLE FOR UNITS THAT USE 1 OR 2 WHEELS - Includes hardware for boat trailer jacks that only require one 6-inch caster wheel and units that use 6-inch dual wheel casters.
Check Stock

Boat Transom Launching Wheels Dolly for Inflatable Dinghy Yacht Tender Raft (US Stock)

  • Easily attached to almost any small boat to allow for effortless movement of your boat over pavement, beach, or other surface.
  • Eliminate the risk of damaging your boat by dragging it. It does consist 3 positions wheel locking function. Constructed of lightweight..
  • Easily installed on wood, fibreglass, or aluminium transoms. Free from Corroding and rusting including sunlight and salt-water. Wheels are maintenance free and self lubricating.
  • Wheels easily lock up when not in use and easily fold down for boat moving. Suitable for boats up to 12'/440 lbs.
  • Specifications: fixing plate 5 7/8" x 3 7/8".
  • suitable for boats up to 12' / 440 lbs. Item Number: PM180001. Made In Taiwan.
Check Stock

VEVOR Boat Motor Stand, 130 LBS Outboard Motor Carrier, 60 KG Outboard Engine Stand, Two Wheels Boat Motor Dolly, Heavy Duty Multi Purposed Portable Boat Motor for Motor Repair, Maintenance, Storage

  • STEEL CONSTRUCTION: With tubes made of steel, the boat motor cart, weighing about 32lbs, can hold up to 315lbs. And the hanging board is made of solid wood, more sturdier for holding the outboard motor..
  • WHEELS FOR MOBILITY: The boat motor cart is designed with 2 universal front caster wheels and 2 rear wheels composed of 2 single wheels. And with wheels, moving it around will be easier..
  • MULTI-PURPOSE: The boat motor cart is ideal for the storing, maintaining and transporting the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
  • ASSEMBLY REQUIRED: Assembly is needed. And the overall dimension of the cart is about 26'' W x 43''D x 46''H. TIP: It would be better if you do not fully tighten the screws until all the parts are lined up properly..
  • ERGONOMIC HANDLE: Being designed with 2 handles allows you to steer and move the cart more conveniently. You can move it around the garage at ease..
Check Stock

AQUOS EASYMATE Folding Marine Outboard Motor Stand/Outboard Engine Carrier for Small to Medium Boat Engine, Max 20HP / 90 LBs

  • MOTOR CARRIER – No more lugging boat motors! The Guide Gear Motor Carrier helps you expertly maneuver heavy boat motors around the shop, driveway, or garage..
  • DURABLE – Made from 1” tubular steel for robust durability with a tough 1/2" plated steel axle. Easily transport your boat parts with the heavy-duty Motor Carrier..
  • WEIGHT CAPACITY – The Motor Carrier is designed for moving boat engine motors of up to 85 lbs. Features ergonomic, easy-grip handles for simple movement..
  • TOUGH WHEELS – The engine stand includes tough 7" semi-pneumatic rubber wheels which provide stability and support under heavy weight..
  • MOUNTING BOARD – The motor stand features a molded mounting board. 46" tall from top of handle to ground..
Check Stock

Trailer Jack Wheel, Dual Trailer Swirl Jack Caster Wheel for Trailer, Boat, Hitch Camper, RV, Soft Ground Roll - 2000 Lbs, 6'' Caster Trailer Jack Wheel Replacement with Pin, Removable

  • Multifunctional Dual Trailer Jack Wheels - Trailer Jack Wheel compatible with 2" Diameter Jack Tubes, Ideal as a replacement for various trailer jack wheels, Dual Jack Wheel Fits for All Standard trailer Jack, Electric A-Frame Jack, Boat, Hitch campers, easy to move popup camper, pop up traile, utility trailer, boat trailer, flatbed trailer, Any Jack.
  • Utility Trailer Wheel - Perfect as a 6-inch caster trailer jack wheel replacement, wheel for trailer jack Maximum load capacity of 2000 pounds. Comes with a heavy duty retaining Clip-Pin, The weld for the lock nut is Very tight and will not loosen. Allow for quick, secure attachment.
  • Caster trailer Wheels for Easy Mobility - 6" poly wheel for convenient trailer mobility and coupling. Trailer swirl jack wheel add mobility to your boat trailer or utility trailer，When the jack is connected, the vehicle can move more flexibly, and it is more convenient to tow the vehicle and the boat.
  • Upgrade Caster Trailer Jack Wheel - The boat trailer jack wheel bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resis....
Check Stock

Yakima - 5 Spoke Spare, Tire and Wheel for all RackandRoll Trailers

  • Seamax Easy Load Boat Launching Wheels Set is designed by Seamax Canada, made by hardest marine grade T6 aluminum alloy with CNC processing.
  • Shiny looking anodized coating on all aluminum parts, product is good for saltwater using.
  • Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats..
  • This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16”) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291..
  • Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5” per stage, plus the wheel’s diameter, the range of length is 22-28 inches..
  • Tire inflation: Dolly tires may not be fully inflated when shipping.
Check Stock

SEACHOICE 52070 Replacement Wheel for Fold Up Boat Trailer Jack 6”

  • Launch your boat with ease with ALEKO's heavy duty dinghy launching wheels.
  • Easy installation: auto lock wheel arms are easy to use and durable.
  • Made from heavy duty 3 millimeter aluminum alloy tubing and durable rubber tires.
Check Stock

Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat and Aluminum Boat Max Loading 600Lb

  • Designed by Seamax and now it is the 2nd edition released in 2019. Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition..
  • BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5” per stage. Plus the wheel’s diameter, the range of length is 23 - 30 inches. It is a great add-on for inflatable, aluminum and fiberglass boats..
  • The wheel arm has 60° and 90° locking position to move up and down. The upper-60° position can free up more space on the top and side of the transom. The lower 60° position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching..
  • The transom bracket installation area is about 8 x 3 inches. Shorter transom ....
Check Stock

JOIERW Boat Launching Wheels, Aluminum Alloy Transom Launching Dolly with 12" Flatfree Airless Wheels for Inflatable Boats, Rubber Boats

  • 【High Quality】: JOIERW inflatable boat launching wheel mainly part is made with 40x40mm 3mm thickness high quality anodizing aluminum and axle shaft is with 5mm thickness which is much thicker than similar model on market..
  • 【Heavy Duty & Versatile】: JOIERW boat launch wheels can carry a craft weighting up to 220lb.And it is adjustable. Suitable for inflatable boats, rubber boats, Assault boats..
  • 【Corrosion-Resistant】: JOIERW launch dolly wheel is made completely from marine grade aluminum with stainless steel hardwares which is rust proof..
  • 【Puncture Proof Wheel】: JOIERW launch wheels for inflatable boat with 12inch airless tires suitable for all types of terrain, allows movement smoothly across different surfaces such as sand, gravel, concrete floor or wooded areas..
Check Stock

115 HP Outboard Motor Cart Engine Stand with Folding Handle

  • ...d up to 440lbs (SORRY, the product instruction was printed wrong by the supplier. The right weight capacity of the item is 440LBS. We will email you the correct instruction.) . And the hanging board is made of solid wood, more sturdier for holding the outboard motor..
  • REAR WHEELS FOR MOBILITY: The boat motor stand is designed with 2 large rear wheels whose diameter is about 9.45”,, which makes it easier for you to move it around. And it comes with a strap for securing item..
  • MULTI-PURPOSE: The boat motor cart is ideal for storing, maintaining and transporting the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
  • ERGONOMIC HANDLE: Being designed with 2 handles allows you to steer and move the stand more conveniently. You can move it around the garage at ease..
  • ASSEMBLY REQUIRED: Assembly is needed. And the overall dimension of the cart is about 27.9”W x 33.5”D x 42”H. TIP: It would be better if you do not fully tighten the screws until all the parts are lined up properly..
Check Stock

VeVe Inc. BLJ-63; Boat Lift Jack (with Mud Plate)

  • Boat Lift Jack & Mud Plate! ( BLJ-63 comes with Mud Plate ).
  • Use to lift hoist by its lower framework and adjust corner post to level boat lift in water..
  • Use to raise the hoist frame to install or remove boat lift installation wheels..
  • Also, the jack tool can be used to raise or lower your dock to changing water levels..
  • Light weight, but Strong Aluminum construction ( J-Hook is zinc plated steel )..
Check Stock

Brocraft Delux Boat Launching Wheels/Delux Boat Launching Dolly 12\ Wheels for Inflatable Boats & Aluminum Boats

  • ★Made of the strongest marine grade T6 aluminum alloy with CNC processing. Shiny looking anodized coating on all aluminum parts. Good for saltwater using..
  • ★Wheels swivel up and down with stainless steel marine quick release pins when needed . The 4 tires are good for grass , hard or soft sand, and dirt..
  • ★Recommended max. weight: 300 Lbs. Max tire pressure: 14 psi. The 4 tires. Shipping Weight: 14 Lbs..
  • ★The dolly can be adjusted while afloat in the boat leaving or coming into, the dolly system can also bring different performance position for boat launching..
  • ★CAUTION: The launching wheels is not designed to be towed behind a vehicle..
Check Stock