Top Boat Windlasses

Stainless Steel Windlass Anchor Chain 316 8mm 5/16 DIN766 by 30 with Shackles

  • Marine Grade Chain - fits many modern windlasses.
  • Rust and corrosion resistant in even harsh conditions.
Check Stock

Blue Sea Systems Safety HUB Fuse Block 150 RBS, Blue/sea

  • Ignition protected fuse block with screw termination.
  • Four 30A-200A MIDI/AMI fuses ideal for high-amp circuits including panel feeds, windlasses and stereo amplifiers.
  • Six 1A-30A  ATO/ATC fuses ideal for low-amp circuits including bilge pumps, electronics and lights.
Check Stock

Blue Sea Systems 7725 Safety HUB Fuse Block 100 RBS

  • Combines an ignition protected fuse block and an integrated connecting plug.
  • Three 30A-200A MIDI/AMI fuses ideal for high-amp circuits including panel feeds, windlasses and stereo amplifiers.
  • Four 1A-200A  ATO/ATC fuses- ideal for circuits including bilge pumps, alarms and clock memory.
  • Safe for use on gasoline powered boats, reduces wiring connections and consolidates up to seven fused circuits.
Check Stock

One Pair Marine Universal Windlass Foot Switch Up and Down Boat Ship Anchor Winch Switches Electric Anchor Winch Switc

  • Available voltage range: Universal for DC electric windlasses running on 12V or 24V..
  • Simple instructions: Contains 1 up and 1 down foot switch, offer easy push-button operation and keep your hands free while raising or lowering anchor..
  • How to use: Need to be operated through solenoids..
  • Good stability: Safety cover prevent accidentally pushing..
Check Stock

Five Oceans FO4430-M2 Marine Anchor Windlass Deck Foot Switch, Heavy Duty UV-Stabilized Black Plastic Cover, 4 inches 2-Pack

  • The footswitch works with up to 150 amps of a continuous draw. Suitable for DC electric Windlasses running on 12 to 24 Volts and can be used without a contactor or control box.
  • Made from UV stabilized black plastic covered. Hinged cover to prevent accidental operation.
  • Nickel-plated copper contacts. Diameter: 4 inches. Mounting Hole: 2-1/2 inches.
  • Heavy-duty construction to resist the harsh conditions of the marine environment.
  • Highly recommended footswitch for the Five Oceans Atlantic, Pacific, and Arctic Windlass series of 600/900/1000/1500W. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Aramox Windlass Foot Switch, 1 Pair Marine Universal Windlass Foot Switch Up and Down Boat Ship Anchor Winch Switches DC 12 V/24 V

  • Universal designed: Universal for DC electric windlasses running on 12V or 24V..
  • Special Improvement: Equipped with Safety cover for prevent accidentally pushing. Need to be operated through solenoids..
  • Package: Contains 1 up and 1 down foot switch and 6 mounting screw..
  • Easy installation: Comes with mounting screws, offer easy push-button operation and keep your hands free while raising or lowering anchor, easy installation..
  • Guarantee: We offer a 12 month warranty, true worry-free shopping experience. If you have any problem, feel free to contact us, our professional mechanic will sort things out for you..
Check Stock

Five Oceans Anchor Windlass Deck Foot Switch Up/Down, Single Direction Switches, 1 UP Switch & 1 Down Switch, White, UV-Stabilized Plastic Cover, FO-3291-2

  • Suitable for DC electric windlasses running on 12-24 volts and must be used with a contactor or control box..
  • Single direction switches. One (1) Up Switch & One (1) Down Switch. 5 Amps (12/24V DC)..
  • Hinged Cover to prevent accidental operation. MADE from UV stabilized plastic..
  • Pre-Wired ready to install - Mounting Hardware Six (6) screws Included.
  • We highly recommend this foot switch for the Five Oceans Atlantic, Pacific and Arctic windlass series of 600/900/1000/1500W.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Youxmoto Reversing Solenoid Switch/Relay Winch Motor, 12V 6 Terminal Reverse Polarity Solenoid DC Contactor, 24450 214-1211A11 214-1231-A11 2141211A1106 214-1211A11-06

  • 【FITMENT】: Reversing Solenoid Relay Switch For Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors & More!.
  • 【REFERENCE PART NUMBER】: 24450BX, 214-1211A11, 214-1231-A11, 2141211A51, 2141211A61, 214-1211A11-06..
  • 【Note】: This Reversing solenoid is only for permanent magnet motors, It is used to reverse polarity on Permanent Magnet winch motors with 2 terminal posts. Not suitable for old style motors with copper winding field..
  • 【6 Terminal Continuous】: 4X - 5/16"-24 threaded studs, 2X - 1/4" male blade terminals..
  • 【75 amps for 5 minutes】: Allow 5 minute cool down time after pushing solenoid to the maximum limit. 12 Volt, 150 surge amps..
Check Stock

Boat Load Mate: Automatic Boat Latch Secures Boat to Trailer While Launching & Loading

  • LAUNCH & LOAD YOUR BOAT WITH NO EFFORT: No more struggling on the ramp with a tow strap, dock line, or other boat trailer straps. Relieve yourself from cranking on a boat winch, tinkering with tie down straps while on the ramp. With Boat-Load-Mate you are able to launch & load your boat without using any boating equipment. In fact, you are able to get your boat in and out of the water without stepping foot on the landing. Absolutely no manual labor is required..
  • KEEP YOU AND YOUR BOAT SAFE: Spending less time on the boat ramp decreases your chance for accidents, injuries, and damage to your equipment. Boat-Load-Mate will keep you safe by reducing the amount of time that you and your boat spend in the hectic bottleneck area of a launch. Boat-Load-Mate enables you to get your boat in & out fast. Boat-Load-Mate automatically latches and catches the transom & protects your boat from falling off the trailer while on the ramp..
  • MANUFACTURED IN AMERICA: Boat-Load-Mate has been cleverly engineered and built for strength. Each unit is capable of securing 2,500lbs of direct impact. Use two units for vessels that weigh 2,500 - 5,000lbs. There is no need to use a boat trailer winch, tow ropes, or boat tie down straps to trailer while on the ramp. Of course, you sh....
Check Stock

Keelguard Boat 19 ft to 20 ft

  • PROTECTS YOUR BOAT against abrasive sand, rocks, concrete ramps, and oyster beds. Eliminate costly fiberglass and gelcoat repairs to boat keel..
  • DO-IT-YOURSELF INSTALLATION in under an hour. Application kit includes a patented burnishing tool to ensure professional results..
  • SUPERIOR ENGINEERING - The Original DIY Keel Guard - Developed with boat designers & 3M engineers. UV-STABILIZED COLORS don't fade or dull and last the lifetime of your boat. Made in the USA..
  • LIFETIME WARRANTY against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat..
  • Recommended Sizes: 4ft - Up to 14ft Boat, 5ft - Up to 16ft Boat, 6ft - Up to 18ft Boat, 7ft - Up to 20ft Boat, 8ft - Up to 22ft Boat, 9ft - Up to 24ft Boat, 10ft - Up to 26ft Boat, 11ft - Up to 28ft Boat, 12ft - Up to 30ft Boat. If the size of your boat falls between 2 sizes, order up for the additional keel protection..
Check Stock

MEGAWARE KEELGUARD Boat Keel and Hull Protector, 6-Feet (for Boats up to 18ft), White

  • PROTECTS YOUR BOAT against abrasive sand, rocks, concrete ramps, and oyster beds. Eliminate costly fiberglass and gelcoat repairs to boat keel..
  • DO-IT-YOURSELF INSTALLATION in under an hour. Application kit includes a patented burnishing tool to ensure professional results..
  • SUPERIOR ENGINEERING - The Original DIY Keel Guard - Developed with boat designers & 3M engineers. UV-STABILIZED COLORS don't fade or dull and last the lifetime of your boat. Made in the USA..
  • LIFETIME WARRANTY against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat..
  • Recommended Sizes: 4ft - Up to 14ft Boat, 5ft - Up to 16ft Boat, 6ft - Up to 18ft Boat, 7ft - Up to 20ft Boat, 8ft - Up to 22ft Boat, 9ft - Up to 24ft Boat, 10ft - Up to 26ft Boat, 11ft - Up to 28ft Boat, 12ft - Up to 30ft Boat. If the size of your boat falls between 2 sizes, order up for the additional keel protection..
Check Stock

Offshore Easy Slip On Mooring Boat Covers by Wake (Model C) (Blue, Fits: 16 to 18.5-Feet)

  • 【Marine Grade Protection】 - Made of durable 300D Heavy duty marine grade fabric. The entire boat cover has the features of water-resistant, tear-resistant, UV protection, tough and scratch-resistant. Morhept Boat cover is easy to withstand tearing, fading, wetting, and cold cracking, protecting your boat from challenging marine environments..
  • 【All-weather Protection】- Morhept boat cover delivering Top-Class protection from adverse weather conditions - whether rain, snow, ice, wind, dust, or sun! Double-stitched seams with straps reinforced to decrease water entering from the stitching. The elastic cord is sewn in around the hemline for a secure and snug fit. 10PCS adjustable straps and quick-release buckles help you lock the boat cover tightly and prevent it from being blown away..
  • 【UV Protection】- One of the main reasons why fabrics fade is exposure to direct sunlight. To protect it from that, our boat cover is enhanced with anti-UV properties. Hence, the boat cover will hardly release dye and stain your boat, and secondly, the fading will take place very slowly and minimally. Morhept boat cover can protect your boat always in a good condition..
Check Stock