Top Body Shop Tools Slide Hammer

18pc HD Heat Treated Dent Puller w/13lbs Slide Hammer Auto Body Shop Repair Tool

【High Performance】Sturdy steel shaft and knurled handle for a reassuring grip. Provides a strong pulling force that ensures that all your car dents pull out smoothly with minimal effort..
【High Qulaity】 Slide hammer dent puller set is constructed with heat-treated steel for extra strength and durability, for all pounding and pulling operations.
【Easy to Carry】 Comes with a durable plastic storage case, you can neatly collect the tools and easily bring them anywhere you like.
【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.

Check Stock

EWK Pneumatic Suction Dent Puller for 75-125mm Car Body Panel Dent Repair

【 Paintless Repair 】 Dent puller suction cups are made of premium soft rubber material. The slide hammer will help ease the dent without damaging....
【 Easy to Use 】 The slide hammer dent puller with principle of leverage is ergonomic, efficient and labor. Comes with 3 suction cups of different....
【 Strong Vacuum 】 The pneumatic suction pad can firmly grasp the panel. Connect the slide hammer with air compressor to hold up strong pressure to....
【 High Quality 】 Made of quality material, built to last for a life time use. Comes with a heavy duty custom-blow-molded carrying case that help....
【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....

Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
These tools make the job simple and prevent damage to your bearings when pulling.
Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
For removal only, not intended for installation.
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
Sizes permanently laser-etched on tool for easy identification.
Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.

Check Stock

OTC 4579 9-Way Slide Hammer Puller Set , Black

OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs.
Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.
Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.
Enjoy special OTC Tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.

Check Stock

YOOHE Auto Body Paintless Dent Removal Kit - Car Dent Puller Kit with Slide Hammer T-bar Dent Puller and Bridge Dent Puller for Car Dent Repair and Metal Surface Dent Removal

HIGH QUALITY - The car dent puller kit include a slide hammer T-bar dent puller and a silver dent puller. These dent puller made from high quality....
PRO 2 in 1 SLIDE HAMMER - Long T-bar dent puller tool is a labor-saving pulling mode via slide hammer hit to repair dents of all sizes with perfect....
WIDELY USE - Most pro & comprehensive paintless dent removal tools kit, totally has 43 pcs, including all the classic and popular dent puller tools.....
SO EASY TO OPERATE - Our dent puller kit coming with detailed repair steps introduction for operate, it make the dent removal process so easy. so it....
TECHNICAL SUPPORT - You will enjoy professional service center, 30-day full amount refunding, quality warranty and technical support. All products....

Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
You can save hundreds of dollars by using this one pilot puller.
VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
This blind hole bearing puller is built to last.
DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.

Check Stock

J&R Quality Tools Auto Body Repair Slide Hammer Set 18 Piece Set

Includes these attachments: Rubber cover, 6pc Hasp Iron, Cast Iron Hammer, Long Tube, Hex Nut, Circular Nut, Circular Pipe, Tapping Screw, Right Angle Flat Steel, 2pc Hex Standard Component, Connector, Double Barreled Connector.
Slide hammer set is constructed with heat treated steel for extra strength and durability for all your pounding and pulling operations.
13 pound slide hammer 24" long, giving you a greater pulling force.
Hammer dent removal set can be used in auto body repairs, non-damaging removals of dents and hubcaps.

Check Stock

GLISTON Car Dent Remover Tool Paintless Dent Repair Kit Pro Slide Hammer Tools with 16pcs Thickened Black Tabs for DIY Automobile Body Dent Removal

PRO 2 in 1 SLIDE HAMMER: Long T dent remover tool is a labor-saving pulling mode via slide hammer hit to repair dents of all sizes with perfect effect....
HIGH QUALITY MATERIAL: T bar slide hammer dent puller made from tempered high carbon stainless steels and standard stainless steel. The 16 pure black....
EASY to OPERATION: Most of the dent remover can be finished in half hour, it can save your much money and time, in addition, the auto body dent repair....
WIDELY USE: This sliver slide hammer suit for all sizes tabs, so you will remover the dent (work great for large dent, but not suitable for corners or....
SAFE& : GREAT SERVICE: Dent pullers tabs won't damage at the vehicle original paint. (100W) glue gun built-in fuse and makes it safer. All material....

Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....

Check Stock

YOOHE Dent Puller Kit - 53pcs Paintless Dent Repair Kit with Slide Hammer T-Bar Dent Puller and Adjustable Gold Dent Lifter Puller for Car Hail Damage Dent & Ding Remover

PERFECT TOOL - Our car dent puller kit with a total of 53pcs, it is a complete DIY body dent repair kit. Including the most classic and popular tools....
UNIQUE DESIGN - Using the principle of leverage to design the dent puller is ergonomic, the golden dent lifter with a unique can adjust Width and....
PRO 2 in 1 SLIDE HAMMER - The T-bar slide hammer dent puller have two ways to use. Long T-bar dent puller tool is a labor-saving pulling mode via....
SO EASY TO OPERATE - Our dent puller kit coming with detailed repair steps introduction for operate, it make the dent removal process so easy. These....
TECHNICAL SUPPORT - You will enjoy professional service center, 30-day full amount refunding, Excellent customer service brings you no worries after....

Check Stock

Fly5D Complete Paintless Auto Dent Removal Tools Set, PDR Dent Puller Kit for Autobody Repair of Dents with Different Aluminum Dent Pull Tabs Can Be Reused Countless Times

... everything in the first picture,Come with 46pcs dent puller tabs,Contains 6pcs of Aluminum Pull Tabs which are more solid,not easy to break,can be reused.Professional grade dent pulling tabs for paintless auto dent repair.Different Kinds of size spiral tabs are suitable for almost dents and hail damage..
2in1 Slide Hammer Dent Remover - 2in1 T-bar auto dent removal tool is used with different size of the glue puller tabs for Paintless Dent Removal.Slide hammer is more powerful for DIY Dent Repair, conquer big dents.
The upgrade bridge dent puller and gold dent lifter is more suitable for repairing small and medium dents..
100% Protect the Body Paint- DIY Paintless Dent Repair is the most cost effective method for removing car door dings hail dents Motorcycle Tank Dent etc.Efficient and safe to pop out dents,Our dent repair process will 100% protect the body paint.Whether you decide you want to tackle a full dent repair project, or just want to save money by doing minor repairs yourself, FLY5D is the best choice for you!.
Glue Removing Instruction: In general, After fixing the dent,use alcohol to clean the extra glue on the car and the puller sets.Well done.In the winter,Heat up the glue for 30 seconds with hot water. Or extend the heating time to 1 minu....

Check Stock

LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments

Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....

Check Stock