Top Boiler Pipe Fitting Tube

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock

Sharkbite Disconnect Tongs all three U711, U713 & U715

  • Sharkbite Disconnect Tongs all three U711, U713 & U715.
  • Allows for easy removal of Universal brass push-to-connect fitting from pipe.
  • Used to remove a tube from a SharkBite push-fit fitting.
  • Easy to use and very fast to Disconnect with this tool.
Check Stock

Moonshan Commercial Steam Milk Frother 4 IN 1 Milk Steamer Machine with 400 Fl Oz Capacity Electric Fully-Automatic Coffee Foam Maker Frothing Machine for Coffee, Milk, Bubble Tea, Milk Tea

  • 20 MIN FAST HEATING: This commercial steam milk frother adopts a 2300W high power heating tube, ready the milk frother machine within 20 minutes. Copper coated protection make the heating tube not easy to accumulate scale. Step-by-step heating function ensures full boiling and continuous steam..
  • 400 FL OZ FOOD GRADE BOILER: The capacity of the boiler inside this steam milk frother is up to 400 fl oz, meet the commercial needs of continuously serving cups. The boiler is made of food grade 304 stainless steel, no worry of hygiene..
  • DOUBLE TEMPERATURE DISPLAY: Upgraded from traditional only a temperature display, this steam milk frother has both hot water temperature and cup temperature display: Real-time observation of the temperature of the beverage being heated, keep know the temperature of hot water. More indicators display the working status..
  • SIX SAFETY PROTECTION: Anti-scald knobs for safe operation.
  • dry burning protection for avoid electric disaster.
  • over-temperature protection that auto-shutoff if the temperature over the safety range.
  • anti-leakage connection of boiler for stable working.
  • over-pressure self-relief protection to avoid explosion.
  • and drip-proof water outlet for safer operation..
  • [12-Months WARRANTY] Each steam frother was checked and....
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Calculated Industries 4095 Pipe Trades Pro Advanced Pipe Layout and Design Math Calculator Tool for Pipefitters, Steamfitters, Sprinklerfitters and Welders | Built-in Pipe Data for 7 Materials , White

  • GET INSTANT ANSWERS for all your pipe layout and design problems so you can get to building.
  • when you use the Pipe Trades Pro together with measurements from blue prints you know the end result will be right.
  • it calculates right angles, offsets, parallel pipe cutbacks, fitting angles, bends, weight or volume conversions, flow rates and more.
  • JUST WHAT THE JOURNEYMAN PIPE FITTER NEEDS.
  • spend less time looking at charts and quickly calculate using built-in pipe data that lets you choose from 7 different pipe material and types. Just enter size to get diameter, wall thickness and filled weight per foot as well as internal area.
  • use it for bending tube and figuring offsets and more.
  • SIMPLIFY COMPLETE BUILDING LAYOUT with almost no need for a blue book, this calculator handles plumbing and metric unit conversions at the push of a button, it does everything but cut the pipe for you.
  • enter data in feet-inch-fractions or decimals just as you would say the measurement.
  • plus, works as both a standard and trigonometry calculator.
  • DEDICATED FUNCTIONS HELP YOU solve intricate pipe runs.
  • if you have ever laid out a rolling offset, you know it is a challenge especially when using unknown angles or fittings that have to be cut to make a specific travel, advance or roll....
Check Stock

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • ... to a Honda Generator or any other compatible generators. The generator then can intake the fuel from the external tank and it can extend the operation time..
  • [Composition]: This kit includes one long fuel pipe with automatic lock.
  • two short fuel pipes connected to the fuel tank cap and two fuel tank caps. The tight fitting of the fuel pipe prevents oil leakage..
  • [Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the fuel cap.In use, as for the users except Honda generator users, the tank should be placed at a higher position than the generator, using gravity to transport oil.Carefully rotate the fuel t....
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

EVIL ENERGY AN6 Flare Cap Tube Fitting Hex Head Port Fitting Adapter 2PCS Aluminum

  • 6AN Flare Cap Tube fitting maximum pressure of the fitting is 4000psi (275bar) and the working temperature range is -65º F to 252º F, manufactured....
  • AN flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters..
  • Female pipe plug nut fitting universal application for Diesel, E85, Water,Air Line. The surface is black anodized for great appearance and....
  • Accessories can be used either temporarily or permanently. Cap block off nuts are 100% reusable..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a product and service..
Check Stock

12 Pack Pipe Insulation Foam Tube Pre Slit Self Adhesive Foam Pipe Covers Polyethylene for Outdoor Indoor Water Pipe Pipeline (0.8 Inch)

  • Sufficient Quantity: you will receive 12 pieces of pipe insulation foam tubes, with the size of 2 cm/ 0.8 inch in diameter of the middle hole, 1 cm/ 0.4 inch in thickness, 40 cm/ 15.7 inch in length, ample quantity can meet your using needs.
  • Quality Material: the foam pipe insulation is made of foam, with flame retardant on the surface to prevent fire, safe and reliable to use.
  • Self Adhesive: the water pipe insulation tube is self adhesive, will form tightly seal after removing the protective paper, not easy to fall, reassuring to use.
  • Practical Function: the outdoor pipe insulation cover is suitable for hot and cold pipes, which can save resources by stopping condensation, and can prevent heat loss, fitting to prevent water pipes from freezing in winter and sweating in summer.
  • Convenient to Use: the foam insulation tubing is equipped with the pre cutting slit, which makes it easier to open and install on the pipe, bringing much convenience for your installation.
Check Stock

PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use

  • [Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
  • [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
  • [Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
  • [Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
  • [Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
Check Stock

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock