Top Boiler Pipe Seamless Carbon Tube

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock

Tailpipe Cutter, Exhaust and Tailpipe Cutter Apply to Cut Pipes 3/4-Inch to 3-Inch in Diameter

  • APPLICATION:Use tools to cut pipes with diameters of 3/4 to 3 inches..
  • CARBON STEEL:Exhaust Pipe Cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable..
  • ANTI-SLIP:The handle is good thickness and non-slip, easy to operate..
  • GOOD PERFORMANCE:Tools work well in areas that are hard to reach.Double wall tube will not be cut..
  • EASY TO USE:The fifteen blades effectively cut the pipe, so complete cutting takes only 1/4 circles..
Check Stock

Moonshan Commercial Steam Milk Frother 4 IN 1 Milk Steamer Machine with 400 Fl Oz Capacity Electric Fully-Automatic Coffee Foam Maker Frothing Machine for Coffee, Milk, Bubble Tea, Milk Tea

  • 20 MIN FAST HEATING: This commercial steam milk frother adopts a 2300W high power heating tube, ready the milk frother machine within 20 minutes. Copper coated protection make the heating tube not easy to accumulate scale. Step-by-step heating function ensures full boiling and continuous steam..
  • 400 FL OZ FOOD GRADE BOILER: The capacity of the boiler inside this steam milk frother is up to 400 fl oz, meet the commercial needs of continuously serving cups. The boiler is made of food grade 304 stainless steel, no worry of hygiene..
  • DOUBLE TEMPERATURE DISPLAY: Upgraded from traditional only a temperature display, this steam milk frother has both hot water temperature and cup temperature display: Real-time observation of the temperature of the beverage being heated, keep know the temperature of hot water. More indicators display the working status..
  • SIX SAFETY PROTECTION: Anti-scald knobs for safe operation.
  • dry burning protection for avoid electric disaster.
  • over-temperature protection that auto-shutoff if the temperature over the safety range.
  • anti-leakage connection of boiler for stable working.
  • over-pressure self-relief protection to avoid explosion.
  • and drip-proof water outlet for safer operation..
  • [12-Months WARRANTY] Each steam frother was checked and....
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool Muffler Pipe Cutter

  • CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness.
  • ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts.
  • DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels.
  • EASY TO USE: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • COMFORTABLE GRIP: 9.3 inch (23.6cm) exhaust pipe cutting tool has 3.8 inch (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security.
Check Stock

Parker 10 TX-S Triple-Lok Flare Sleeve 5/8 JIC Steel

  • Not flaring, soldering or other tube preparation.
  • One piece nut and sleeve reduces installation time.
  • Use with chopper, seamless steel and thermoplastic tubing.
  • Steel tubing must be cold drawn and annealed seamless low-carbon per sae J524 with a maximum hardness of Rockwell B65.
Check Stock

Midwest Hearth 17-Inch Burner Pipe for Gas Log Lighters Replacement Burner Tube Only

  • HEAVY DUTY - Sturdy construction provides years of reliable service..
  • LOW CARBON STEEL - 0.05 to 0.30% carbon content. Strong, tough, and economical..
  • REPLACEMENT BURNER TUBE - Replaces the burner in our Universal Log Lighter with Air Mixer..
  • PERFORMANCE - Quickly light logs and heat chimney for best efficiency and cleanliness..
  • PERFECT REPLACEMENT FIT - 3/8" NPT fits the burner pipe hole on the air mixer (sold separately)..
Check Stock

Aopin Carbon Fiber Tube Pultrusion 2mm(OD) x 1mm(ID) for Quadcopter, DIY Project, Hollow Matte Pole, Length 200mm,4pcs

  • √◊ Brand introduction: Aopin has more than 34 years of factory product design and development experience, this is your trustworthy guarantee. Since its establishment, we have been adhering to the professional and innovative business philosophy in terms of industrial products Materials, functions, and customer experience..
  • √◊ Carbon fiber tube is a kind of composite Material, which is made by mixing carbon fiber and plastic, solidified and pultruded (or wound) at high temperature. It is light in weight, only a quarter of steel, and its strength is dozens of times that of plastic products.The tensile strength can reach 1Gpa and elastic modulus reach 400Gpa, low density, 1.5-2.0g/cm³(1.5-2.14 Gram per cubic centimetre)..
  • √◊Carbon fiber bar perform well in humid or hot environments, even in seawater and coastal environments.Good water resistance and aging resistance, so no matter it is operated in corrosive environment, harsh open air and humid environment, its service life can reach more than 24 years.One of the high-performance fiber Materials..
Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security..
Check Stock

Home Intuition Foiled Back Ceramic Fiber Pipe Wrap Insulation Tape Roll for Indoor Outdoor Water Pipes Fire Rated 2300F 3”x25’

  • The First of Its Kind – An industry-first solution for high temperature pipe insulation, this roll combines the best qualities of ceramic insulation, pipe wrap, and heat tape for water pipes into one extremely effective tool..
  • Easy to Install 25′ Roll – The first and only ceramic insulation to come in a convenient roll for easy pipe wrapping. Save time and cut costs on installations. Simply wrap the pipe, and secure. Dimensions: 3 inches wide x 0.25 inches thick x 25 feet long. Non-adhesive..
  • Energy Saving Insulation – Foil backed insulation locks in heat and reduces wasteful heat radiation loss on hot water pipes. Material is energy saving with low thermal conductivity, to increase efficiency and lower heating costs..
  • High Stability and Strength – High temperature pipe insulation that is fireproof up to 2300 degrees F. Safe fire rated pipe insulation with excellent chemical stability and industrial grade durability for long service life..
  • For Hot and Cold Pipes – Perfect for boiler and heater pipe insulation, pool pipe insulation, AC line insulation, AC pipe insulation, exterior pipe insulation, and insulation for pipes outside and in. Helps prevent moisture and condensation buildup on cold water pipes..
Check Stock

Garosa PVC Cutter Ratcheting Plastic Pipe Tubing Cutter PVC Pipe Cutter 2-1/2in 64mm Hose Cutting Scissors Heavy Duty Cutting Tool SK5 Steel Blade Aluminum Handle for PVC PP PU PE Pipe

  • USEFUL TOOL: Professional mechanics design, scientific design of aperture ratio, balance force, strong shear force, easy cutting, smooth and neat cut, improve work efficent..
  • RATCHET DESIGN: Self-locking ratchet design, tooth meshed and longitudinal feed, automatic locking does not rebound. Safe and secure. Our pvc pipe cutter maximum cutting diameter 64mm.
  • MATERIAL: SK5 material blade, high carbon content, high hardness, strong toughness, strong cutting, safe and not easy to break, not easy to rust, long life, high-quality blade steel.
  • PORTABLE: Ergonomic design, comfortable to hold and not tiring hands after working for a long time. The tail handle lock design, the lock locks the handle for easy carrying with work..
  • SUIT FOR: The pipe cutter is suitable for cutting PVC pipe, PP pipe, PU pipe, PE pipe. Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair..
Check Stock