Top Bolt Latches

AR-House Sus-304 Stainless Steel Security Door Guard Lever Action Flush Bolt Latch Slide Bolt Lock, Satin Nickel Brushed (6 Inch (15 cm))

  • 1.A Sturdy Door Security Latch: Made of Thickened 304 Stainless Steel– High Quality– Protecting you and your families.
  • 2.Easy to use : Concealed & Barrel Slide Door Bolt Lock, Closed side panels, Spring tension lever action.
  • 3. Size : Length=6″(15cm), Width=3/4″(2cm), Depth = 5/8″(1.7cm).
  • 4. Beautiful & Practical–Hidden flush bolt latches, most of doors are applicable. Aesthetically pleasing appearance with a truly excellent satin finish..
  • 5. included: 1 door bolt Latch with a strike and screws..
Check Stock

Master Lock - (4) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-4

  • ...get two 4-packs keyed alike, you must order the 8-pack..
  • APPLICATION: Ideal for outdoor applications when needing many locks that utilize ONLY one key. The 37 lock works on 1-7/8 & 2 inch couplers & on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. TO FIT COUPLER LATCH: Remove the shackle sleeve. Shackle fits standard opening of 9/32" (7mm). Note that non-rigid shackle has enough play to fit virtually all coupler latches less than 7/8 wide..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
  • SPECIFICATIONS: 3/4" (19mm) Armored Shackle Guard helps block bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

PawHut 42\ Heavy Duty Dog Crate Metal Cage Kennel with Lockable Wheels, Double Door and Removable Tray, Brown

  • SIMPLE PORTABILITY: The 4 caster wheels provide easy effortless movement while 2 of the wheels lock in place to secure the rolling pet crate..
  • CONVENIENT ACCESS: This indestructible dog crate features two points of access.
  • a large front door that is secured with a double bolt lock, and an easy-open top hatch with a bolt lock to keep your pets secure..
  • SECURE ENCLOSURE: This escape proof dog crate is secured by 2 slide-bolt latches on the front access door and a central slide-bolt latch on the top hatch. The steel frame keeps your pets secure inside the high anxiety dog crate..
  • EASY CLEAN UP: This heavy duty dog cage includes a solid slide out tray and a slide out floor grate for easy cleaning and maintenance..
  • METAL DOG CRATE INFORMATION: Overall dimensions: 42.5" L x 30" W x 34.25" H. Front Door Dimensions: 24" W x 16.5" H. Suitable for pets less than 31.5" in length, less than 15.75" in height at the shoulder and less than 88 lbs. in weight. Assembly required..
Check Stock

PawHut 42\ Heavy Duty Dog Crate Metal Cage Kennel with Lockable Wheels, Double Door and Removable Tray, Grey

  • SIMPLE PORTABILITY: The 4 caster wheels provide easy effortless movement while 2 of the wheels lock in place to secure the rolling pet crate..
  • CONVENIENT ACCESS: This indestructible dog crate features two points of access.
  • a large front door that is secured with a double bolt lock, and an easy-open top hatch with a bolt lock to keep your pets secure..
  • SECURE ENCLOSURE: This escape proof dog crate is secured by 2 slide-bolt latches on the front access door and a central slide-bolt latch on the top hatch. The steel frame keeps your pets secure inside the high anxiety dog crate..
  • EASY CLEAN UP: This heavy duty dog cage includes a solid slide out tray and a slide out floor grate for easy cleaning and maintenance..
  • METAL DOG CRATE INFORMATION: Overall dimensions: 42.5" L x 30" W x 34.25" H. Front Door Dimensions: 24" W x 16.5" H. Suitable for pets less than 31.5" in length, less than 15.75" in height at the shoulder and less than 88 lbs. in weight. Assembly required..
Check Stock

Buling Aluminum Hood Latches Catch Kit Compatible with Jeep Wrangler JK JKU 2007-2018 & Jeep Wrangler JL JLU 2018-2021 & Jeep Gladiator JT 2020+

  • FITMENT - Our jeep hood latches is perfectly designed for 2007 - 2018 Jeep wrangler JK 2 door and unlimited 4 door (Sahara, Freedom, Sports and Rubicon).
  • 2018- 2020 Jeep Wrangler JL JLU and 2020+ Jeep Gladiator JT..
  • Material-Made of high strength aluminum alloy and stainless steel,black powder coating on the surface can resist oxidation and rust,These hood catch kits are adjustable, durable and aesthetically.
  • FUNCTIONS-Reduce the vibration of the hood,the hood can be kept in its original position even on rough roads, These Aluminum Hood Catch Kits are quality latches to directly replace the factory rubber latches which cause hood shake and flexing at high speeds and trail rides.
  • Easy installation-Direct Bolt-On Installation, No Drilling Required. Completely adjustable for a perfect fit..
  • Here are some special styles that you can choose freely. Our Hood Catch Kit will make your Jeep looks super cool. you can choose our jeep gas cover (ASIN:B08S43B7SD) to match them to form a unified style..
Check Stock

NATGAI 4 Pack Metal Lock Barrel Bolt Spring Loaded Locking Latch 6.5\ Long w/Grip Heavy Duty for Gate Shed Door Tailgate Trailer Garage (4 Pack)

  • 【Specification】: 6.5 Inch long spring bolt - 0.5" diameter round bolt - mounting plate: 1-9/16 inch by 3 inch.
  • 【Heavy Duty】: Constructed of heavy duty metal.
  • zinc coated for rust protection, red handle cover for easy pulling and turning, ultra-durable and corrosion resistant, perfect for indoor and outdoor applications..
  • 【Quick Release】: This spring bolt can lock in the open position, making your life easier. Simply pull back the bolt and rotate in place against the retaining pins - the tension from the spring will hold the latch open. Once you are ready to lock up, simply rotate the handle and the pin will automatically release..
  • 【4 Mounting Holes】: Each unit comes with 4 mounting holes pre drilled for the quickest installation. These mounting holes are countersunk for a flush finish with screws and a semi recessed finish if bolting in place. (Fasteners not supplied).
  • 【Package Included】: 4 x Spring-loaded barrel latches.
Check Stock

2pcs Stainless Steel Gate Latches Barn Door Lock,Flip Lock Latch, Suitable for Door and Window Slide Lock Barn Door

  • Durable Material:The gate latch is made of high quality stainless steel.Not easy to rust,durable,and covered with rustproof coat, does not fade.Ensure high quality and longevity..
  • Perfect size:The size of the flip door lock is 100 x 70 mm/3.93 inches x 2.75 inches (length * width), and the thickness is 2 mm/0.08 inches. Each bolt is equipped with 4 screws..
  • Perfect Design:This door bolt without any sharp edge,exquisite concise appearance,you can also complete the installation quickly and can meet your needs..
  • Wide Application:This door bolt is suitable for most door locks, such as for farm gates,small pet cage, sheds, cabins, bedrooms, doors, garages, gardens, bathrooms, cabinets, kitchens, offices, hotels, etc..
  • You Will Get:2Pack Stainless Steel Gate Latches ,with 8 pieces screws..
Check Stock

BTMB 6 Inch L Type Flush Bolt Concealed Security Door Lock for Composite Doors,French Doors,Wood Doors 2 Pack

  • Hidden flush bolt latches, most of doors are applicable..
  • Combine ergonomic radiance design L Type Flush Bolt, give special comfortable hand feeling..
  • Concealed Door Lock made of stainless steel, surface brushed, metal texture, not easy to oxidize, strong resistance..
  • Screws will provide extra strength to engage and interlock firmly so as to be immobile,they are long and sharp enough to be mounted on the door easier,shorten installation time..
Check Stock

Master Lock - (3) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-3

  • ... APPLICATION: These padlocks are ideal for all outdoor applications when needing multiple locks that utilize ONLY one key. The #37 latch lock works well on 1-7/8 and 2 inch couplers and on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. KEY RETAINING - ensures that padlock is not left unlocked..
  • PADLOCK FEATURES: 1-9/16"(21mm) wide x 3"(76mm) high. Armored Shackle Guard blocks bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing. Removable shackle sleeve. Sleeve off - Secures coupler latches to accommodate openings 9/32" (7mm) in diameter. Sleeve on - Works best with hasps, fits openings 1/2" (13mm) in diameter or larger. Precision pin tumbler mechanism resists picking..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
Check Stock

HCY Dog Crate, Dog Kennel 36 Inch Double Door Metal Crate Foldable Puppy Supplies Cage with Divider Panel, Handle, Plastic Tray for Pet Animals Outdoor Indoor (36 Inch),Black

  • (Secure Home) Rounded corners for your pet's protection. Dog kennel made of heavy-gauge steel with a tight wire mesh for increased longevity and durability, powder coated Black vein finished for rust-resistant. Each door also has 2 heavy-duty slide-bolt latches to securely lock it in place to keep your pet safe inside..
  • (Easy Assembly)The dog cage can be set up in seconds, with no tools required for assembly. When not in use, this metal dog crate folds flat for convenient storage, safekeeping..
  • (Double Door Kennel)The dog crate made from sturdy wire steel for pets who like to scratch, bite and dig through their kennels. The crate is equipped with front and side doors that latch securely with two-sided bolt latches..
  • (After- Service)If you have any problem with the dog crate or meet any question during the usage, please feel free to contact our customer service, we promise we will provide you the most professional technical support and the best solution..
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock