Top Bolt Screw

QCAA Solid Brass Door Knocker, 7-3/4\

  • Solid Brass Construction for max corrosion resistance.
  • Unique design add a decorative appearance.
  • Could adjust to fit door thick from 1.4" to 2.1". Screw hole center to center is 5.2".
  • Combo screw & bolt coulb be adjustable to fit different door thick.
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Rexka 30pcs Fender Liner Under Cover Wheelhouse Liner Screw Bolt Compatible with Toyota Lexus 90159-60477

  • Other Names: Mount Bracket Bolt, Wheelhouse Liner Screw, Air Deflector Screw, Deflector Screw, Bumper Cover Bolt, Bumper Cover Screw, Side Shield....
  • Fits: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, HS250h, IS F, IS250, IS350, LS430, LS500, LS500h, LX470, RC F, RC300,....
  • Fits Avalon, C-HR, Camry, Corolla, Echo, Highlander, Prius, Prius AWD-e, Prius C, Prius Prime, RAV4.
  • M6.2 x 22mm 18mm Washer Diameter 10mm Hex, Black E-Coat Phillips Hex Head Screw.
Check Stock

Renovators Supply Manufacturing Black Aluminum Toilet Bolt Cap Cover 1\ H X 1.5\ W Universal Fit Toilet Screw Covering Round Caps Tarnish And Rust Resistant Durable Aluminium Bolt Covers

  • ...em inside. These bolt caps can universally fit and cover different size of toilets bolts..
  • DIMENSIONS - The package includes a set of two black Toilet Bolt Covers and gaskets. Measures 1 inch in height and 1.5 inches in diameter - Perfect replacement for your worn-out bolt covers!.
  • EASY INSTALLATION - The Toilet Bolt Screw Covers are easy to install with the provided gaskets. They can quickly cover the ugly, rusted or dangerous toilet bolts. Take care not to over tighten the caps, and use the included gaskets. You can easily install these useful tough long lasting covers all by yourself - DIY Toilet Bolt Caps!.
  • BLACK BOLT COVERS - The round black finish of our universal toilet floor screw covers are a great way to keep overall bathroom decor in place, it can instantly enhance the entire look. - Easy cleaning, Simple installation, and has Excellent fit..
  • BUY WITH CONFIDENCE - Our exclusive black tarnish and rust resistant Aluminum Toilet floor bolt covers are designed to last many generations. We provide 100 % satisfaction guarantee for 60 days with no fee..
Check Stock

Danco 80821 Snap on Round Toilet Bolt Caps in White Pack of 2

  • DURABLE CONSTRUCTION - The Danco Toilet Bolt Caps are made with plastic material for easy cleaning, simple installation, and excellent fit..
  • EASY INSTALLATION - The Danco Toilet Bolt Screw Covers are easy to install with snap-on inserts. They snap right in for a quick and hassle-free solution to covering sometimes rusted or dangerous toilet bolts..
  • COVER UP HARDWARE - The Danco Toilet Bowl Caps will cover up any unsightly, protruding hardware used to secure your toilet to the floor. Often toilet bolts can be a sore sight, especially if rusted over. Toilet screw caps are an easy and efficient way to cover for an unnoticeable look..
  • WHITE FINISH - The white finish of the toilet screw covers are a great way to keep overall decor coherent throughout your entire bathroom..
  • INCLUDES - The Danco Toilet Bolt Covers comes with two individual caps with washers for a snap-on installation..
Check Stock

uxcell 1/4-Inch Flat Washer, Alloy Steel Black Oxide Finish Pack of 50

  • Fit for Screw Threaded Dia: 1/4";Size: 15.7mm x 1.5mm/0.62" x 0.06"(OD x T).
  • Alloy steel black oxide finish for corrosion resistance, for outside applications, easy to install..
  • Prevents a nut, bolt, or screw from pulling through the material.
  • Apply for electrical connections on household and commercial appliances and in threaded bolt connections..
  • Flat washers are used under the head of a bolt or nut across the area of the support to prevent pull through..
Check Stock

Push Barrel Bolt Latch Slide Lock ATTHW® 2 Pack 3 Inch Spring Stainless Steel Barrel Locks for Garage Sliding Gate Latches for Inside Door Press Button Hardware for Rv, Toilet, Bathroom Shed Cloakroom

  • ...as a replacement bolt latch perfect for room doors, boxes, yards, fences, cabinet doors, shed, chests, closets, kennels, chicken coop, and windows..
  • ✅Easy to Install: 1.Decide where you want the lock and take the small side piece hold it up against the frame.2.Use a pencil to make two circles, pre-drill, then screw in with the screws. 3.Take the larger piece and push the bolt across so that it’s through the piece you’ve already installed to hold it in place.4.Use a pencil to mark the upper left-hand place for the screw for the first hole. 5. Once you have one screw installed it’s much easier, again pre-drill and then installs other screws..
  • ✅What You Get: 2 x Barrel bolt latch silver, 12 x Screws (Warm Tip: For single doors, you can install one barrel bolt latch on top, middle, and bottom randomly. For double doors, you can install one bolt latch on the top and bottom randomly. But you cannot install only one bolt latch in the middle of the double door. You need to install one bolt latch at the top or bottom of the door. ).
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • Designed for Screw & Bolt Extracting: Each bit has dual head designs, one is used to drill a hole in the middle of the the damaged screws or bolt with the drill end, the other is used to extracting it. The special design helps you grab and remove the screws precisely and easily in 10 seconds or less..
  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt ....
Check Stock

Screw X-Tractor Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set

  • APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released.
  • POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts.
  • EASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and its easy to extract the screw or bolt using extractor tool.
  • HARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind.
  • WARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle.
Check Stock

YUENTOEN Stripped Screw Extractor - 5pcs HSS Easy Out Broken Bolt Extractor Kit with Extension Screw Holder, Damaged Bolt Water Pipe Remover Set Power Drill Bit Tool for Screw or Bolt 1/8 to 3/4 inch

  • 【High Quality】These 5 piece broken screw remover set is made of high-speed steel with jagged irregular cuts, which can create more extraction possibilities for broken screws or bolts for extra durability and a good lifespan..
  • 【Meet Any Requirement】5 x Broken bolt extractor with magnetic extension screw holder, screw extractor size includes #1 for 1/8"-1/4", #2 for 1/4"-5/16", #3 for 5/16"-7/16", #4 for 7/16"-9/16", #5 for 9/16"-3/4"..
  • 【Clever Design】Reverse thread bits spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the screw extractor's grip increases..
  • 【Simple to Use】First attach drill bit(Dr) to the extension bit holder, then the drill should be moving the bit counter clockwise(and please use the slow speed), finally use the screw extractor(Ex) side to remove the screw-bolt..
  • 【Wide Application】Allows the bolt remover to work with rusted, cracked, damaged or stripped screws, studs, bolts, ....
Check Stock

RWYMQWT Stripped Screw Extractor Set and Damaged Screw Extractor Kit Easy Out Broken Bolt Remover Screw Remover Set Made From H.S.S 4341 High Speed Steel With Hardness 63-65hrc

  • 【 Durable】The Screw extractor is made from 4341 high quality speed with 65 HRC hardness, which the density and hardness are about 20 percent....
  • 【5 - Pieces Bolt Extractor Set】This Damaged screw extractor kit (#0/#1/#2/#3/#4)works with most drill and all the screw size or bolt (3-12mm),....
  • 【Easy To Use】It's a very simple step. Just select a drill bit smaller than the damaged screw and you can easily remove the damaged screw. Please....
  • 【 Titanium】We have added a layer of titanium to the screw extractor, which makes the stripped screw extractor removes easier to store, does not....
  • 【Useful】Suitable for hexagon socket bolts, square head screws, wood screws, hexagon head screws, mechanical screws, sheet metal screws and other....
Check Stock

USS Flat Washers 3/8\ (100 Pieces)

  • Zinc coating for a corrosion resistant finish.
  • USS coarse washers for coarse threaded bolts.
  • Washers are used to increase the pressure a bolt or screw provides.
  • Use a washer that is the same finish as your other fasteners.
Check Stock