Top Bolt Stud Welding

Mophorn Stud Welder Kit 1600A Stud Welder Dent Repair Kit 800VA Spot Welder Stud 110V Welder Stud Kit Stud Gun Dent Puller Kit with Complete Accessories Dent Welder Repair for Auto Body Repairing

  • ...copper electrode. This welder stud kit is wear-resistant, strong and sturdy..
  • Thermal Protection: The stud welder dent repair kit is designed with thermal protection function. When the temperature of the transformer reaches 95°C (203°F), the thermal protection function of the machine will work, providing long-term welding, security and higher efficiency..
  • Heavy Duty Slide Hammer: The heavy-duty spot welder stud with quick-release chuck can hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of cast iron slide contributes to comfortable grip..
  • One-handed Simple Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state..
  • Useful Accessories Included: This stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small in size and can be used flexibly in any position. The tool box makes the welding accessories neat and portable..
Check Stock

12-Point Cylinder Gasket Head Stud Bolt Kit Compatible with 1997-2003 Chevy LS1 LQ9 LS6 4.8L 5.3L 5.7L 6.0L Engines 279.1023

  • 【Compatible with】1997-2003 Chevrolet LS LQ9 LS1 LS6 4.8L 5.3L 5.7L 6.0L Engines, 1997-2003 C5 Corvette, 1998-2002 Camaro/Firebird F-Body, 1999-2003 Silverado/Sierra GM Trucks (4.8L, 5.3L, 6.0L)..
  • 【Package Includes】16*long M11 head stud.
  • 【Quality Standar】Each cylinder head screw set is strictly manufactured to ensure zero defects-hardened and parallel ground washers are included with zero failures to ensure uniform load distribution and accurate torque readings..
  • 【Premium Built】Cylinder Head Stud Kit is made of 8740 high tensile strength chromoly steel strict quality testing. With professional processing technology the surface is treated with black oxide finish and the old or damaged cylinder head bolt kits can be directly replaced..
  • 【Lifetime Warranty】The Cylinder Gasket Head Stud Bolt from KET comes complete with a lifetime warranty.If there is any problem with the product,please contact us and we'll solve it for you immediately..
Check Stock

Bestauto Dent Puller Machine 3800A Vehicle Panel Spot Puller Dent Bonnet Door Repair GYS2700 Dent Puller 12KW Spot Welder for Car Dent Repair

  • Small Welding Traces: Compared with other products, our spot puller's single-sided welding thickness is 0.6-1.2 mm, so the welding spots are small,....
  • Heavy-duty Welding Gun: The durable welding gun is made of premium iron material, which is corrosion-proof and features high strength. Besides, you....
  • 9 Modes for Selection: 9 Welding modes are provided for you to choose from and multiple welding power levels to adjust. The functions and power will....
  • Efficient Cooling System: The holes on the side can quickly perform heat dissipation without a fan, making the spotter dent puller not so easy to....
  • Wide Application: No matter what type of vehicle it is, cars, trucks, vans, our stud gun dent puller kit can target car collision damage, such as....
Check Stock

Katofa Vehicle Panel Spot Puller Dent Spotter 3500A Spot Welder Dent Puller for Car Auto Panel Dent Bonnet Door Repair 110V Spotter Welding Machine

  • ★ [Main functions]--Carbon rod warming and tempering, washer welding, sheet upsetting, needle welding, wiggle wire welding and so on..
  • ★ [Application]--Sheet metal fire, meson, straight pull, spot welding, flattening, wave line, stud, OT film, triangular and so on..
  • ★ [Feature]--110V, 3500A. Intuitive, the control knob enables selection of both the output power and the requested mode.More intelligent and welding....
  • ★ [Easy to use]-- Manual, the weld is simply controlled by a light press of the gun trigger.The machine thermal protection will work when the main....
  • ★ [Quality Guarantee]--We provide 1 month warranty for free return and 6 monthes for free replacement part in case of non-human reasons！！.
Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • ...here, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
  • A Hold You Can Trust - The CondoMounts anchor channel w....
Check Stock

Solary Aluminum Weld Stud Weld Studs CD Type Weld Stud Capacitor Discharge CD Stud 1 Set for Welding Bolt Plate Insulationnail Spot Welders

  • ①Appartus for aluminum stud -Raw Material:Copper. -Length:65mm..
  • ②Aluminum stud connector -Raw Material:Aluminum . -Length:60mm..
  • ③Aluminum stud -Raw Material:Aluminum . -Length:15mm..
  • ④Dent pulling hook -Raw Material:iron. -Length:77mm. -Weight:about 41g..
  • ⑤Welding Extractor -Raw Material:Copper. -Size:L50*W50mm. -Weight:about 60g..
Check Stock

MOTOCOCHE 110V Car Body Dent Repair Kit Stud Welder, 3KW 3500A Spot Welding Machine, 7 Modes Multi-spot Bonnet Door Repair Tool with Spot Dent Puller & Welding Guns

  • Ideal Tool -- Car body dent repair kit is a professional tool for repairing body dents/spots. Compared with traditional machines, our machine has smaller welding joints, which can effectively prevent damaging the anti-corrosion paint on the other side of the panel. Welding thickness: 0.6-1.2mm/0.024-0.047inch..
  • Multiple Power Levels -- Auto stud welder dent repair kit equipped with welding guns and pull gun, you can quickly switch between different welding functions. 7 welding modes/Tools, 10 power levels for your choice, you can use the right welding mode and power according to the car body condition..
  • High Quality -- Spot welding machine built-in powerful cooling system to ensure welding efficiency while ensuring fast heat dissipation. Complete accessories to meet your needs for repairing various dents/spots, no need to purchase extra, high quality support for long term use, saving time and money..
  • Applications -- Vehicle panel spot puller dent spotter is suitable for sheet metal fireproofing, spot welding, flattening, meshes, straight pull, studs, flash welding, carbon rod heating, etc. The concave surface can be repaired quickly without disassembling the vehicle, it is an essential tool for auto repair shops and auto beauty shops..
Check Stock

Draw-Tite 4454 Gooseneck Rail Kit for GM

  • for use with 9465 hide-a-goose and 9475 under-bed gooseneck hitch heads, along with 6300 and 630044 remov-a-ball gooseneck hitch heads.
  • no need to raise truck bed on most models.
  • spacer shims included to protect truck bed.
  • simple bolt-on application with no welding required.
  • No need to raise truck bed on most models.
  • Spacer shims included to protect truck bed.
  • Simple bolt-on application with no welding required.
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Harris BiPod Solid Base 9-13 inches 1A2-L

  • made from high strength anodized aluminum alloy.
  • stressed parts are tempered spring steel.
  • bipods clamp to most Q.D. stud-equpped bolt action rifles and have sling attachment probision and adjustment foroff center stud.
  • spring loaded folding legs are quickly adjustable for height.
Check Stock

CXRacing Manifold Header Stud Bolt for Mazda Miata MX-5 1.6L Engine 11PCS

  • CXRacing Engine Manifold/Header Stud Bolt Kit For 1990-1998 Mazda Miata 1.6L Engine.
  • 11 Pcs of Studs, Complete Stud Kit for the 1.6L Engine..
Check Stock

Harris BiPod Solid Base 13.5-23 inch 1A2-H Black

  • made from high strength anodized aluminum alloy.
  • stressed parts are tempered spring steel.
  • bipods clamp to most Q.D. stud-equpped bolt action rifles and have sling attachment probision and adjustment foroff center stud.
  • spring loaded folding legs are quickly adjustable for height.
Check Stock