Top Bora Straight Edge Clamp

Bora Saw Guide 544006

  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges.
  • Versatile - Fits right- and left-handed circular saws.
  • Improved Front fence minimizes side to side tool movement.
  • New side stop allows you to replace the tool in exactly the same place, every time.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3....
Check Stock

BORA Track Clamps Securely Cut Any Angle with WTX and NGX Clamp Edge Systems Saw Guide Accessory for Woodworking Carpentry DIY Two-Pack 542011

  • Cut Any Angle: BORA Track Clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate.
  • Easy Set Up: Attach the track clamp to the top or bottom of the rail for maximum grip. Easily tighten or adjust the clamp with the speed nut and lock....
  • Non-Marking Grip: Each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations.
  • Solid, Secure Hold: The strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your....
  • Versatile: Sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power.
Check Stock

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

BORA 100 WTX Clamp Edge and Saw Plate Set for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length | 545106K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge and Extension include ruled edge for easy measuring. Length-62.75 inch, Width-3 inch, Height-1.5 inch.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
Check Stock

BORA 50\ Ruled WTX Clamp Edge and Saw Plate Set for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length | 545056K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge includes ruled edge for easy measuring.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
  • Fits right- and left-handed circular saws.
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

Pro-Grip Straight Edge Clamps (24\ Clamp)

  • Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
  • Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
  • The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
  • Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
  • The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Edge Products CTS3 84130-3 Touch Screen OBD2 Monitor Gauge Scanner & EGT Probe Pyrometer Kit 98620 Compatible with 1996 Vehicles & Newer

  • MAKE STRAIGHT, ACCURATE DADOS AND RABBETS – Woodworkers asked us for a router guide / router jig that would make precise Dados, Rabbets, and Mortise....
  • WORKS WITH THE BORA WTX and NGX CLAMP EDGES – The perfect addition to your woodshop, this dado router guide will help with all of your woodworking....
  • WORKS WITH ALMOST ALL MAKE/MODEL ROUTER – Includes a 1” standard guide bushing for easy mounting (works with almost any routers). No drilling or....
  • VERSATILE CUTTING FOR WIDE DADOS – Cutting adjustment allows for cutting wide dado’s with a 1/4" 3/8" or 1/2" router bit.
  • LARGE PLATE SIZE FOR EASIER HANDLING – The large plate size ensures your router stays steady, and is easy to handle.
Check Stock