Top Bore Size

Brush Research 2\ (51mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

• Flexible Cylinder Hone made of Silicon Carbide.
• Hone is Made in USA by Brush Research Manufacturing.
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
• Perfect for bore honing and cylinder refinishing.
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

MidTen Laser Bore Sight 12 Gauge Green Bore Sight Laser Boresighter with 3 Sets of Batteries

• High Accuracy and Strong Brightness - 12 gauge green laser bore sight is more penetrating than a red boresighter, reaching an aiming range of approximately 15-100 yards on sunny or foggy days. The 12 gauge bore sight laser allows you to zero in quickly and reduce ammo waste..
• High Temperature and Low Temperature Resistance - 12GA bore sight can be used normally between -10 ℃ and 40 ℃..
• Suitable Size - Fit a 12GA chamber, specific caliber..
• Long-Lasting Battery Life - The package contains 3 sets of upgraded batteries (9 LR44 batteries), and each set of batteries last 2 hours. The bore sight doesn't contain a switch, the laser automatically "turns on" when the battery is installed, and "turns off" only when the battery is removed. Please remove the battery after use..

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

• Flexible Cylinder Hone made of Silicon Carbide.
• Hone is Made in USA by Brush Research Manufacturing.
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
• Perfect for bore honing and cylinder refinishing.
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

Brush Research 3 1/2\ (89mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide)

• Flexible Cylinder Hone made of Silicon Carbide.
• Hone is Made in USA by Brush Research Manufacturing.
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
• Perfect for bore honing and cylinder refinishing.
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

Brush Research 1 1/8\ (29mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

• Flexible Cylinder Hone made of Silicon Carbide.
• Hone is Made in USA by Brush Research Manufacturing.
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
• Perfect for bore honing and cylinder refinishing.
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 400 Grit (Silicon Carbide)

• Flexible Cylinder Hone made of Silicon Carbide.
• Hone is Made in USA by Brush Research Manufacturing.
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
• Perfect for bore honing and cylinder refinishing.
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

Brush Research 1 1/4\ (31.8mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

• Flexible Cylinder Hone made of Silicon Carbide.
• Hone is Made in USA by Brush Research Manufacturing.
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
• Perfect for bore honing and cylinder refinishing.
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

XOOBIU Bore Sight Hunting Red Laser Zeroing Sight Boresighter with Batteries .45

• ✔PACKAGE INCLUDED: One bore sight and 10 of batteries. It requires 2 batteries to run.
• ✔SUPER LONG BATTERY LIFE: Upgraded battery, it can let your bore sight work continuously for more than two hours.
• ✔ACCURATE CALIBRATION & SAVINGS: Bore sight have accuracy compact and lightweight size, highly to reduce cartridges and shells wasted..
• ✔LASER CLASS: Class IIIA laser,5mW or less.
• Easy to use, reduce cartridges and shells wasted.
• ✔ LIFETIME WARRANTY: If you have any problem, please feel free to contact us.

AlveyTech 12 Tooth Heavy Duty Clutch Assembly with 1" Bore & #35 Chain Sprocket for Go-Karts & Mini Bikes

• 12 tooth heavy duty clutch assembly with a 1" bore and a #35 chain sprocket for go-karts and mini bikes..
• When your fun machine's drive system needs a replacement centrifugal clutch, please consider this 12 tooth heavy duty clutch assembly with a 1" bore and a #35 chain sprocket for go-karts and mini bikes.
• The 1" bore allows this clutch to work with gas engines larger than 6.5 Hp. In addition, the 12 tooth drive sprocket is made for use with the common #35 chain size. A 1/4" keyway slot and pair of set screws secures the clutch to your 'kart or bike's shaft..

XOOBIU Bore Sight Hunting .40 Red Laser Zeroing Sight Boresighter with 10 Batteries

• ✔PACKAGE INCLUDED: One bore sight and 10 of batteries. It requires 2 batteries to run.
• ✔SUPER LONG BATTERY LIFE: Upgraded battery, it can let your bore sight work continuously for more than two hours.
• ✔ACCURATE CALIBRATION & SAVINGS: Bore sight have accuracy compact and lightweight size, highly to reduce cartridges and shells wasted..
• ✔LASER CLASS: Class IIIA laser,5mW or less.
• Easy to use, reduce cartridges and shells wasted.

Shars 3/8\ x 6\ SCLCL Left Hand Indexable Boring Bar with CCMT Insert 404-2478 P]

Carkio Go Kart Clutch 3/4 Bore 13 Tooth Inner Hole 20mm Compatible with Mini-Bike #428 Chain 6.5 HP 210CC 215CC

• Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4" Bore 13 Tooth #428 Chain.
• Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft..
• Package Included: 1 x Go Kart Clutch 3/4" Bore 13 Tooth (Inner Hole 20mm).
• Carkio focuses on providing high-quality products and first-class services at reasonable prices. If you are not satisfied with our products, you can....