Top Bore Sizes

Carbman Carburetor Rebuild Repair Kit for SPI MK Carb VM30 VM32 VM34 VM 30 32 34 mm

• Replace Part Number: for VM34-168 42-6015 VM34SC.
• Bore Size: 34mm, Main Jet: 260, Pilot Jet: 35.
• Fits 125cc 138cc 140cc 150cc 160cc 4 stroke engines Dirt bikes Pit Bikes.
• custom-fit fuel mixture flow to match engine modifications.
• Please do not hesitate to contact us with any questions, we will reply you in 24 hours.

TUELETFU Universal Piston Ring Squaring Tool for End Gap 2-5inch Bores

• Application: Great fixture for squaring rings in the bore prior to setting end gaps. Covers bores from 2 inch -5 inch so that you can consistently and accurately measure piston ring end gap.
• Places rings 1 inch below the deck to get past head bolt distortion.
• Feature: Made of high quality material and adjusts to many bore sizes.
• Simple to use with or without head studs in place.
• Note: Please feel free to contact us if you have any questions about our products, your satisfaction would be our greatest motivation.

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

• Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
• Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
• Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....

5" x 2" Red Polyurethane on Silver Semi Steel Cast Iron Wheel Only with Roller Bearing - 1/2" Bore - 1000 lbs Capacity per Wheel - Service Caster Brand

• Service Caster’s Polyurethane tread on Semi Steel Cast Iron core wheels come in five sizes – 3-1/4" x 2", 4” x 2", 5” x 2", 6” x 2", and 8” x 2"..
• Weight capacity ranges from 700 lbs. on the 4” wheel, 1000 lbs. on the 5”, 1200 lbs. on the 6”, and 1400 lbs. on the 8”..
• All wheel sizes have a 1/2" axle bore and a 2-7/16" hub length. When the spanner bushing is removed, all wheel sizes can be used on a ¾” axle. Need a 5/8” axle bore? Call us with your order number or message us by clicking the blue Service Caster Corporation hyperlink underneath the buy or add to cart button and then clicking the ask a question button. The hub length is the widest point of the wheel, so it is important to ensure you can accommodate this width before purchasing..
• Our Polyurethane tread on semi-steel cast iron core wheels are non-marking, non-marring. In addition, the wheels feature a polyurethane tread that is permanently interlocked by mechanical bonding to the cast iron core. Finally, the wheel tread is non-marking, smooth rolling, and quiet while also being highly resistant to oil, grease, water, and most solvents. With so many great features, Service Caster’s Polyurethane tread on cast iron core wheels will keep Moving You Forward..

Climax Metals MC-16X10 Steel Set Screw Collar with M6 x 6\ Set Screw, Metric, Black Oxide Plating, 16 mm Bore Size, 28 mm OD (Pack of 10)

• Specification - Two-Piece Clamping Shaft Collar 1/4" Bore Black Oxide Set Screw Style 4Pcs.
• Product Name - Bore 1/4" Two-Piece Clamping Shaft Collar Carbon Steel.
• Sizes - Outside Diameter : 11/16"(0.6875 Inch/ 17.5625mm).

Milton S-444 Valve Core Tool

• One end for standard bore, one end for large bore valves.
• Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skincard.
• One end for standard bore, one end for large bore valves..
• Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skin card.

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

• Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
• Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
• Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
• Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
• Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.

8 Pieces Wire Brush Drill Bore Cleaning Brush Set with 1/4 Inch Hex Shank Stainless Steel Wire Twisted Brush for Drill Impact Driver, 8 Sizes

• Package contains: you will get 8 pieces of stainless steel cleaning brushes with 8 different sizes, all of them have 1/4 inch hex shank, which can be applied on ports, tubes, bearings and other common wire brush applications, enough quantity for your need.
• Quality materials: these bore brushes are made of stainless steel and brass copper, strong and durable, which can clean rust and detail completely.
• Twisted wire is for increased cleaning action, durable and abrasive.
• Size details: the drill wire brush is 1/4 inch hex shank fits for power drills, impact drivers, die grinders, the overall length is about 4-3/4 inch, and 8 kinds of width includes 8, 9, 10, 11, 13, 15, 17 and 19 mm, so you can choose the suitable size to use according to your needs.
• Multiple functions: this bore cleaning brush can access into narrow holes and confined areas easily, designed for use on right angle grinders, also suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, corrosion without damaging surfaces or fine features.
• Suitable occasions: these wire bore brushes can be applied in your car, garage, office and kitchen, nice for cleaning, polishing, painting, or rust removal in automotive, fabrication, machining and smiting applications and mor....

Shars 3/8\ x 6\ SCLCL Left Hand Indexable Boring Bar with CCMT Insert 404-2478 P]

EZshoot Green Laser Sight Green Dot 532nm Rifle Scope with Rail Mount for Outdoor Hunting Shooting - Include Barrel Mount Cable Switch

• 【Green Laser Beam】The bore sight with a clear and bright green laser, the laser bore sight can work well in any weather conditions..
• 【Premium Performance】EZshoot bore sight kit is equipped with Class IIIA, less than 5mW, 632-650nm. This bore sight fits for different light conditions, green laser sight farther than red laser..
• 【Upgraded Battery System】EZshoot bore sight kit inlcudes 2 upgraded laser boresighter CR2 batteries which can be used continuously for up to 4 hours..
• 【Multiple Caliber Adapters】Comes with 9 well-made and compact adapters, the bore sight kit for almost all guns. Perfectly fit various calibers from 0.17 to 0.54, pistols, rifles, shotguns, etc. just select the proper adaptor, place the bore sight in the muzzle. One bore sight kit handles multiple situations, a great value!.
• 【Improved Button Switch Design】EZshoot skilled boresighter craftsmen have been insisting on creating a simple and rugged laser bore sight system, this bore sight kit comes with handy push-button switch design, just lightly press to turn ON/OFF..

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

• ...or running cables or wires and they also use it for joining larger timbers..
• The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened.
• The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included..

OSWCHIC Laser Bore Sight Kit, Green Dot Rifle Pistol Shotgun Boresighter for .177 to 12Ga Cal, Button Switch, 24 Adapters

• Green Dot Bore Sight- This New laser bore sight is a precision tool and made of top quality aluminum metal, it's will get your handgun, rifle, shotgun on the paper quickly. Class IIIA laser, output less than 4mW.
• 24 Caliber Adapters- 12 different sizes of caliber adapters, plus we added an extra pack of adapter, you don't have to worry about the barrel adapter broken or lost. These adapters fit for .177 through 12ga caliber firearms.
• Pre-set Laser- The laser head was pre set, no need to adjust the laser when first using.
• Ergonomic Botton Switch-You can use your finger to turn the switch on/off like the trigger, more smooter.