Top Boring Bar Alignment Tool

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

DPTOOL Engine Camshaft Timing Locking Tool Kit Compatible with Ford Focus Fiesta Mazada 1.25 1.4 1.6 1.7 1.8 2.0 Twin Cam 16V Engine Ecoboost 1.6 Ti-VCT 1.5/1.6VVT 2.0 TDCi 303-1097 303-748 303-1550

  • ...ld required the cam pulleys to be removed and timed, for lockingthe camshafts in position to allow the variable valve timing pullys to be removed, kit also includdes HP pump sprocket retaining tool required during pump removal/replacement applications.
  • Kit Include: This kit have 9 tools, include: 1 Crankshaft Pulley Alignment Tool.
  • 1 Locks Camshaft Sprockets during Timing Belt service.
  • 12 Months Warranty: Made of high quality steel, high hardness, not easy to break, the surface is coated with black anti-oxidation layer or plated to prevent rust. We offer 12 months WARRANTY, we will refund or replace, if the timing tool have any quality problem , or you can contact us, we will serve you wholeheartedly.
Check Stock

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Bike Alignment Tool, Bicycle Derailleur Hanger Alignment Gauge, Aluminum Alloy Ranging Tool Bike Repair Tool Orange

  • --Provides a simple, accurate means for checking hanger alignment and for straightening hangers that are not properly aligned.
  • --The tool threads directly into the derailleur hanger. The gauge bar holds a gauge to mark the distance to the wheel..
  • --The gauge is rotated with the wheel to the 3, 6, 9, and 12 o'clock positions, noting any differences in measurements..
  • --The alignment of the derailleur hanger is accomplished by applying pressure to the tool's arm. The results can be checked instantly..
  • --Function: Proper alignment of a bike's derailleur hanger is important for reliable shifting. While a derailleur hanger can be bent when a bike is crashed or dropped on its side, even new frames often have misaligned hangers. Provides a simple, accurate means for checking hanger alignment and for straightening hangers that are not properly aligned..
Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

  • For use with AXA tool post 250-100 or 250-111. up to 12" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

OXA #4 Quick Change Heavy Duty Boring Bar Tool Post Holder OXA 250-004

  • For use with OXA tool post 250-000. 6-8" swing.
  • Holds 3/8" with bushing (1/2" diameter without bushing).
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

Blush Confetti Cute Cocktail Shaker with Lid and Built-in Strainer, Fun Bar Tool and Accessory, BPA-Free, Gold

  • THROW YOURSELF A PARTY - Tired of the usual boring, plain-old bar tools and bar accessories? Liven up your kitchen and bar cart with a cocktail shaker that puts the rest to shame. Show off your personality whether you’re mixing drinks like a pro bartender, or just showing it off on your home bar cart or liquor cabinet..
  • SHAKE OFF THE WORKDAY AND MIX UP SOME FUN - Perfect for work happy hours or enjoying a cocktail by the pool, this confetti cocktail shaker will make every cocktail feel like a celebration. Mix up colorful drinks like the iconic cosmopolitan or other fun cocktail recipes and show off the ingredients through the sides of the shaker..
  • CAP AND BUILT IN-STRAINER MAKE BARTENDING A BREEZE - All you need is your cocktail ingredients and glassware. This bar accessory handles all of the shaking and straining, ensuring perfectly chilled cocktails and shots, without any extra ice or lingering ingredients. Make all of your favorite shaken cocktail recipes in this fun bar tool!.
  • BPA-FREE DOUBLE-WALLED PLASTIC FILLED WITH CONFETTI - Every shake creates a flurry of confetti. When you mix up drinks, it looks like there’s a party going on right in the shaker! And you’ll be getting the party started when you show off this cute bar accessory to friend....
Check Stock