Top Boring Bar For Low Speed Cutting

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

OSCARBIDE TCMT21.51 Carbide Turning Inserts TCMT110204 Carbide Inserts 10 Pieces,TCMT Insert Tin Coated CNC Lathe Carbide Cutters Inserts for Lathe Turning Tool Holder Boring Bar

  • Size: TCMT 21.51(TCMT110204), 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials,used for turning and finishing on a wide range of materials.
  • OSCARBIDE TCMT 21.51 has wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
  • Fit our 1/2”Boring Bar Set Tool Holder or 3/8" Mini Turning Tool Holder or Other Brands the same size carbide inserts, you can search the Asin: B07PLX982C or B07PYSN4JC to purchase set directly..
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock

Oregon 72LGX100U PowerCut Saw Chain, 100' Reel

  • Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch (41-91cm).
  • Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions.
  • Blued cutters provide superior corrosion resistance and improved strength.
  • "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
  • Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.
Check Stock

Oregon 73LGX100U PowerCut Saw Chain, 100' Reel

  • Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch (41-91cm).
  • Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions.
  • Blued cutters provide superior corrosion resistance and improved strength.
  • "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
  • Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock