Top Boring Bar For Small Holes

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

Woodowl 04181 1/4″ x 18″ Bellhanger Installation Drill Bit HRC 59 Induction Hardened Steel (1/4″ x 18″)

  • Bellhanger bits are the bit of choice for installing all types of small wire systems including stereo, cable, computer, phone and security.
  • These bellhanger bits are precision milled and ground producing bits that are perfectly concentric with very little wobble. They will drill accurate diameter holes, require less energy to power through wood and produce less heat. They will also drill straight and true through all types of wood with minimal wandering..
  • The tip has a small hole that enables wire to be attached and pulled through long holes in walls, floors and ceilings.
  • Cutting heads are fully induction hardened to 58 HRC making them perfect for boring holes in wood, plaster, lathe and light masonry.
  • These bits feature quick release hex shanks for fast bit change-outs with secure gripping surfaces in drill chucks.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Amana Tool 203202 Carbide Tipped Hinge Boring Drill Bit 20mm Dia x 70mm Long x 10mm Shank Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed.
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 20 mm. Overall length (L): 70mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

Woodpeckers DP-Pro Master System, 36/36 Model, Precision Woodworking Drill Press Table

  • 【Application】This is a Hinge Boring Machine. Three holes in the vertical position can be processed at one time, including one big hole for hinge head hole and two for assembly screw hole..
  • 【Parameters】The distance between the centers of the two small holes is 1.9inch(48mm). The dia of the big hole is 1.4inch(35mm). The dia of the small hole is 0.1inch(3mm). Max. depth of hole is 2inch(50mm). Max. work piece length is 39inch(1000mm).
  • 【Powerful Motor】1.5KW copper motor with rotating speed of 2880RPM, which will be powerful and durable..
  • 【Precise Drilling】With graduated scale so that the drilling can be presice and convenient..
  • 【With Foot Pedal】This machine need electric source and air source. A foot pedal is equipped for easy control..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

  • Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
  • Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock