Top Bowden Cable

2 Meters Capricorn Bowden PTFE Tubing XS Series Low Friction for 1.75mm Filament PTFE Teflon Tube Cutter Pneumatic Fittings Silicone Socks and Nozzles for Ender 3/3 Pro/5/5 Pro/ 5 Plus 3D Printer

  • Original Authentic: 100% Original Capricorn XS Series Bowden tubing. High Lubricity Additives make our XS Series tubing the lowest friction Bowden....
  • Precise Print: Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less....
  • Excellent Performance: Capricorn Bowden tubing is designed specifically for 1.75mm filament, the filament is loaded smoothly to the hotend with as....
  • With accessories: PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions....
  • What You Get: 1*2 Meters PTFE Tube, 3*0.4MM Nozzle, 3*Sillicone Cover, 1*Big Fitting, 1* Small Fitting, 1* Tube Cutter. If you have any unsolvable....
Check Stock

[Gulfcoast Robotics] Bowden Collet and Clip Set for 1.75mm Creality All Metal Hotend 5 Pack

  • Bowden collet and clip set are designed for and compatible with the [Gulfcoast Robotics] All Metal Hotend for Creality 3D Printers..
  • Also compatible with the Micro Swiss All Metal Hotend and similar products on the market..
  • Package includes (5) sets of black bowden collets and matching collet clips..
Check Stock

Ted Lele 8Meters 26.2Ft 4mm OD 2mm With Tube cutter PTFE Teflon Bowden Tube for (white) (8M)

  • Package Content : 1pc PTFE Teflon Bowden Tube.
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • 100% Genuine Capricorn XS Bowden TubingCapricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • Less FrictionHigh Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(bla....
Check Stock

3D Printer 3 in 1 Out Multi-Color Extruder Three Colors Switching Hotend Compatible with Titan Extruder and Bulldog Bowden Extruder 1.75mm

  • Thermistor:100K NTC 3950, main heat sink block 60*27*27mm.
  • This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for....
  • Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended).
  • Color switching is fast and stable, without significant print quality defects..
  • Firmware modification is simple, easy to use.
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

PRUSA Original Prusa i3 MK3S+ Kit, (PRI-MK3S-KIT-ORG-PEI)

  • Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength..
  • Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD..
  • Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor..
  • For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer..
  • We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!.
Check Stock

Iverntech Upgraded Dual Drive Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385.
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament.
  • Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
  • Suitable for most 3D printers and filaments.
  • Packing with: 1x Bowden Extruder, 1 x Universal Stepper Motor Bracket.
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

  • Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament..
  • Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament..
  • Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments..
  • Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant..
  • Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble..
Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

  • 3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
  • Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Check Stock