Top Braided Wick

CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length

  • ☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks.
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

  • 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
  • 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
  • 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
  • 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Check Stock

CCOZN 2 Pack 19.6Ft Solder Wick, No-Clean Solder Braided Wick Desoldering Wick For Solder Removal Tool, 0.1 Inch Width 3m Length for Each

  • ☃[Package Include] You will get 2 pack No-Clean solder braided wicks.
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 3.0 m / 0.1 inch x 9.8 ft solder wicks.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wick]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

Solder Wick Braid Copper Wire with flux 10 ft 3M Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board 1pcs

  • ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux..
  • ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs..
  • ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process..
  • ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components..
  • ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..
Check Stock

EUPNHY 100 PCS 8 inch Thick Hemp Wicks in 3mm Diameter, Pre-Waxed by 100% Natural Beeswax & Tabbed, Beeswax Wicks for Candle Making.

  • ️Prewaxed & Pretabbed Hemp Candle Wicks: 100 pcs/pack. 8 inch (20cm), thick gauge wick dia:3 mm, base dia: 0.75 inch(1.9cm). 22 ply, coated in 100% natural beeswax..
  • ️100% Organic Beeswax Hemp Braided Wick: eco-friendly,lead free,paraffin free,non toxic,no zinc & other metals. The wicks work well with beeswax, paraffin, soy wax, palm wax, coconut wax..
  • ️Flawless:hemp burns slower than cotton, it burns hotter, and is more rigid than the typical wicks..
  • ️Good Wicks Burn Nice Easy To Use. BURNS CLEAN:the wicks are perfect for different containers, mason jars, wine bottle,votives and pillar candles. wick testing is recommended to achieve optimal burning characteristics and will vary with different combinations of wax, dye, fragrance and container size..
  • ️Some Tips For You! please be cautious with dosages of scent and dye whilst making your candles, excessive dosages might have an influence on the burning effectiveness, causing smoke and reducing the ability of your candles to stay lit..
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and efficiency to your work.
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

Expanding the Silos Trailer

  • ...g gift, a birthday gift, an anniversary gift, wedding gifts, fathers or mothers day gift, a bridal shower gift, engagement gift, summer camp gifts, book club gifts or just because!.
  • FREE OF ADDITIVES: All fragrance oils are Paraben- & Phthalate-free. Featuring a cotton-braided wick free of lead and zinc, our candle scents bring warming relief without the worry of breathing in toxic chemicals. Enjoy the long lasting scent, air freshener and clean burn from candles produced in small batches with a focus on attention to detail and quality..
  • HIGH QUALITY: The wax found in our candle jars are made of 100% pure soy from domestically grown beans. Our soy candles make great gifts for women and men alike, whether it's for a birthday, anniversary, or housewarming gifts. Forget about using a low quality air freshener, fill your room or house with the comforting and familiar smell of our unique candle..
  • BURN RESPONSIBLY: Simply trim the wick to 1/4" before lighting, keeping the candle free of any foreign materials like matches or wick trimmings. Never leave your candle burning for more than four (4) hours at a time and ma....
Check Stock

Himalayan Trading Post, Cafe Tin Grapefruit Pine Candle 9oz

  • Lavender & Grapefruit: Lavender is a wonderful and familiar aroma that brings a calm and soothing effect. Indulgence with notes of Sweet Grapefruit. The blend of citrus fills the room with bright colors for the days when you wish you lived in a cottage surrounded by a warm hilltop.
  • Calming and Relaxing Scent: Soy candles are known to calm the nerves and relieve anxiety. Our Lavender & Grapefruit scented candles with uniquely blended fragrances soothe you after a long and tiring day. You will definitely love their exquisite and tranquil aromas.
  • Candle Size and Lasting Time: Candle size. 3.7in H, 2.8in D. Work for approximately 50 hours per 7.2oz candle. Quantity. 2. Helps the longevity of your candle if you keep the wick trimmed to about 0.25in before you lit it.
  • Soybean Wax: Combines 7% fragrance plant oils with the soy wax. Braided cotton with paper core wick. Kraft paper label, strong metal lid, mason jar.
  • Perfect Gifts: Comes with a giftable box. The perfect gift for birthdays, Valentines Day, Mothers, fathers, Christmas, Thanksgiving, women and men, or just to say Thank you. This gift will delight people of all ages.
Check Stock

Ashland Jar Candles (Cotton Candy)

  • 100% Natural Soy & Coconut Wax with a flat braided cotton wick with good burn stability for a consistent flame hot enough to form a wax pool that reaches the edges.
  • You’ll LOVE our products or we’ll refund or replace them at no cost to you. Guaranteed to be the freshest farts ever!.
  • Perfect idea for birthday gifts, gifts for her, spa/bath gifts, for the special one, gifts for mom, wife, girlfriend, great hostess gift, housewarming gift, bridal shower, Christmas gift, teacher appreciation gift, Mother's Day gift and more..
Check Stock

6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Check Stock

The Road to J.O.Y.: Leading with Faith, Playing with Purpose, Leaving a Legacy

  • ...g gift, a birthday gift, an anniversary gift, wedding gifts, fathers or mothers day gift, a bridal shower gift, engagement gift, summer camp gifts, book club gifts or just because!.
  • FREE OF ADDITIVES: All fragrance oils are Paraben- & Phthalate-free. Featuring a cotton-braided wick free of lead and zinc, our candle scents bring warming relief without the worry of breathing in toxic chemicals. Enjoy the long lasting scent, air freshener and clean burn from candles produced in small batches with a focus on attention to detail and quality..
  • HIGH QUALITY: The wax found in our candle jars are made of 100% pure soy from domestically grown beans. Our soy candles make great gifts for women and men alike, whether it's for a birthday, anniversary, or housewarming gifts. Forget about using a low quality air freshener, fill your room or house with the comforting and familiar smell of our unique candle..
  • BURN RESPONSIBLY: Simply trim the wick to 1/4" before lighting, keeping the candle free of any foreign materials like matches or wick trimmings. Never leave your candle burning for more than four (4) hours at a time and ma....
Check Stock