Top Brake Fluid Pressure Sensor

Brake Bleeder Kit Oil Extractor Fluid Transfer Pump with Master Cylinder Adapter Caps Fluid Extractor for Easy Fluid Change Brake Bleeding Kit for Power Steering Transmission Fluid

  • ⛽【PROFESSIONAL TOOL】Brake Fluid Bleeder is a power steering fluid exchanger equipment. This professional oil extractor is used to empty and fill....
  • ⛽【EASY TO USE AND TIME-SAVING】This oil extractor pump is very simple to use and can be operated by one person. It is equipped with two pressure....
  • ⛽【TWO POWER SUPPLY】Brake system bleeding tool with built-in working pressure pump, no need to connect an extra vacuum pump. Supports a 12V....
  • ⛽【SAFE & RELIABLE】The pump used to fill the brake fluid reservoir is equipped with pressure monitoring. The pump will automatically switch....
  • ⛽【WIDE RANGE APPLICATIONS】Don't worry about model matching, because we offer a full line of master cylinder adapters for use with this fluid....
Check Stock

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

  • The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
  • An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
  • Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
  • pumping is only required to build additional pressure..
  • The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
  • For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check Stock

Motive Products Power Bleeder General Motors Kit 0254

  • Kit comes with custom GM caps (1108) and the universal round (1101) and universal rectangular (1105) caps..
  • Uses pressurized brake fluid to force air and old fluid out of your brake lines..
  • Just pour clean fluid into the pressure tank, attach the power bleeder cap to your fluid reservoir and pressurize the system using the built-in hand....
  • The kits are available for a variety of master cylinders..
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Motive Products - 1107 Master Cylinder Adapter

  • Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines..
  • Just pour clean fluid into the pressure tank, attach the power bleeder cap to your fluid reservoir and pressurize the system using the built-in hand....
  • The adapter in this kit fits most Ford products from the mid 1980 thru present..
  • Also fits many Japanese imports made by Mitsubishi, Subaru and Nissan in addition to some Korean imports such as Kia and Hyandai.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Thorstone Automotive Fluid Extractor Pump 500cc

  • TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
  • LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
  • EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock

Thorstone Brake Bleeder Kit with Hand Held Vacuum Pump Tester | 16pcs Brake Clutch Bleeder Tool with Adapters for Car Kitchen Uses | One-Man Brake Bleeding System Apply to Bike, Motorcycle, Car, Truck

  • 2-IN-1 TOOL SET - This one-man manual brake bleeding kit enables you to bleed brakes, test vacuum readings through the pressure gauge, and pump out oil, power steering fluids, and many other fluid types. Can be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. To flush old brake fluid and air, and guide the new fluid to fill the brake system..
  • VACUUM SYSTEM TESTER - A manual pump with vacuum gauge could be widely used in testing vehicle vacuum system/household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag. Test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle. Equipped with vacuum gauge, convenient readout of pressure, pressure range: 0-30inHg, 0-760mmHg..
  • HIGH DURABILITY & SEALING - Pressure-proof stalinite which is stronger than normal material. The metal parts are made of alloy and copper, with strong corrosion-proof performance. Our tubes are made from premium PVC for high resilience, heat resistance, and maximum sealing performance. Brake bleeding of each wheel takes less than 5 minutes with great ease..
  • COMPLETE ACCESSORIES - Include vacuum pump with gauge, 4.5oz reservoir jar, 3 transparent hoses, 6 adapters, 2 connectors and a blow mold ca....
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

EWK Patented 15L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
  • LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
  • EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock