Top Brake Fluid Tank Cap

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid

  • Test the car brake fluid quality quickly to check whether it’s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident.
  • The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red.
  • Calibrated for cars using DOT4 and DOT3 brake fluids (But DOT3 is almost replaced by DOT4 because DOT4 has better performance).
  • Only takes seconds to know the results,very easy to use.
  • CE and RoHS approved. Protective cap included.Takes 1 x AAA/1.5V battery (not included).
Check Stock

Hunter-Bike Front and Rear Brake Fluid Reservoir Cap Brake Oil Cover for Kawasaki Ninja 400 Z400 2018 2019 2020 (Blue)

  • Features ：Prevent dust and debris from accumulating on the fuel tank and pollutants in the engine fluid, giving you a clean and comfortable feeling..
  • Good Sealing Performance：Good sealing performance, effectively tightening the fuel tank cap to prevent liquid loss or power steering overflow, no oil leakage..
  • Excellent material：Made of high-quality fabric, the absorbing material cylinder and the clutch tank are leaking, and the craftsmanship is exquisite and can be used for a long time..
  • Unique Design：The classic blue and minimalist design adorns your car with a glamorous luxury, with decorative features, a stylish look and improved car quality..
  • Wide application: The universal fuel tank cap protective sleeve is suitable for all models and can be used with most fuel tanks..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

SWANLAKE Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer (1500ML)

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Includes 1 transparent fluid syringe with locking adapter, 3adapters,2 hoses with locking cap on end, extension for deep reach and small diameter applications..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability. A high quality handle help holding pump easily..
Check Stock

OEMTOOLS 25443 Extraction and Filling Pump, Brake Fluid Vacuum Pump Tool for Power Steering and Brake Fluid Reservoir, Garage & Shop Fluid Evacuators

  • SIMPLE BRAKE FLUID EXTRACTOR: Leave the turkey baster in the kitchen and easily extract automotive fluid in moments.
  • The plunger seal draws fluid out of the reservoir smoothly, eliminating messes with one manual fluid transfer pump.
  • FULL DISCLOSURE: Dual scale molded into the body of the fluid evacuator to measure liquid in quarts and milliliters.
  • Clear durable plastic body makes it easy to see how much fluid the syringe extractor collects as well as quality and condition.
  • LOW MAINTENANCE: The body of the fluid transfer pump disassembles into its components, making it easy to clean the cylinder, change the gaskets on the plunger, or otherwise service your fluid pump automotive tool.
  • REACH ANY RESERVOIR: Fluid evacuator pump comes with two connecting tubes that can extend the length of the brake fluid extractor pump from 11” all the way to 26”, so you can access any hard-to-reach filler neck or reservoir.
  • PRODUCT DETAILS: Maximum fluid extractor automotive capacity reaches 200 mL.
  • Includes (2) 7.5” car fluid pump extension tubes with cap locks.
Check Stock

ALEKO OEXP02 1.6 Liter Oil and Fluid Extractor Pump For Automotive Fluids

  • Perfect for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, etc.
  • Includes 1.6 liter tank, 52 and 53 inch hose, suction lock, hand pump and funnel.
  • Ideal for automotive vehicles, watercraft, ATV/motorcycles, farm equipment, lawn equipment, household.
  • Securely stores used fluid for transport or disposal.
Check Stock

Brake Reservoir, Type 2 Style Fits Bus 58-66 & Buggy Master, Compatible with Dune Buggy

  • Front Brake Fluid Master Cylinder Reservoir Cap in brite-dipped anodized finish.
  • This round threaded front brake cap (Pro-tek Part No. RC-100) is 2.25" x .50" and has the word Pro-tek engraved on it twice.
  • 100% CNC made from 6061 T6 billet aluminum available in 4 colors - red, blue, gold, silver.
Check Stock

Kemimoto 6 L Oil Extractor Pump Manual Oil Transmission pump Coolant Change Tool Oil Extraction for Cars, Tractors, Gas Mowers, Marine Engines, Small Aircraft Engines and Coolant and Hydraulic Systems

  • Simply pump operation for easily remove the liquid..
  • Transparent hose allows visual inspection of fluid extraction. Extra hose placement for easy to storage. Durable metal pedal to fix the tank when operating..
  • Can be used to extract engine oil from,brake fluid and lubricant oil from machine and car,water from fish tank and more..
  • Specification: Item Size: 68*24*22cm，Tank Capacity:7L，Working Pressure: 70-170PSI.
  • Fit for most fluid extraction applications..
Check Stock

Windshield Washer Reservoir Tank with Pump - Replaces 85315-02030, 8531502030 - Fits Toyota Corolla Model Years 1998, 1999, 2000, 2001, 2002 1.8L - Fluid Reservoire Bottle

  • REPLACeMENT WINDSHIELD WASHER FLUID TANK WITH PUMP – is made of high-grade quality plastic and stores the wiper washer fluid in your car. It comes with the pump that enables the fluid to circulate through the plastic lines up to the washer nozzles to be sprayed evenly onto your windshield..
  • FITS THE FOLLOWING VEHICLES – Toyota Corolla 1998-2002 1.8L | Chevrolet Prizm 1998 – 2002 1.8L | The windshield washer tank is usually being replaced due to age and exposure to heat over time since it is located inside the engine bay. The washer fluid tank can be identified easily by a windshield wiper logo on its cap which is very accessible..
  • REPLACES PART# 85315-02030, 8531601011, 603-413, 12365338 – If fluid is leaking from below your car, washer fluid is not spraying onto the windshield, windshield washer reservoir tank is frequently low or empty or you can visibly see the cracks on the tank then it needs to be replaced. This replacement part fits popular Corolla & Prizm models with years 98, 99, 00, 01, 02.
  • OEM FIT, QUALITY, FINISH – Cracks mostly cause the fluid to leak and it cannot be repaired. Using your winsdhield washer when the tank is empty may cause the pump to be burnt and will need replacing as well. Th....
Check Stock

HORUSDY 200cc Fluid Extractor, Oil Extractor/Oil Syringe, Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability..
Check Stock

SWANLAKE 200cc Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability..
Check Stock