Top Brake Micrometer Gauge

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

Metric Micrometer

  • 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
  • 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
  • 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
  • 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
  • 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check Stock

Mahr Federal EGH-1028 Surface Analyzer Groove Bottom Probe, 10-Micrometer Radius

  • For use with Mahr Pocket Surf series portable surface roughness gauge (sold separately).
  • Groove-bottom probe for gauging recesses with maximum depth of 6.35mm (0.25").
  • 90-degree conical diamond stylus for two-dimensional tracing.
  • 10 micrometer (0.0004") radius stylus for use with rough surfaces.
  • Measures average roughness (Ra), mean depth (Rz), and maximum depth (Rmax) parameters.
Check Stock

DHA Handheld Vacuum Pump Brake Bleeder Kit with Pressure Tester Gauge Adapters Set, Manual Pressure Bleed Brake Clutch System Fluid Vacuum Bleeder Bleeding Tool Kit Car Motorcycle Motorbike One Person

  • One man brake bleeding kit with check valve could be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid..
  • Automotive abs brake bleeder vacuum pump: Equipped with vacuum gauge, simple operation, convenient readout of pressure Gauge. Pressure range: 0-30inHg, 0-760mmHg. Can test and diagnose a wide variety of brake systems on motorcycle car truck..
  • Brake Fluid bleeder set includes: hand pump with gauge, reservoir jar with 2 lids, 4 transparent hoses, 8 adapters and blow molding case..
  • Carry Case is made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage..
  • We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

  • The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
  • The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
  • The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
  • Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock

5/16\ to 6\ Telescopic Gauge Set 8mm-150mm Adjustable Inner Diameter Gauge 6pcs/Set T-Bore Hole Gauges

  • Working Principle - Double action handles are rigidly attached to the contact plungers and are automatically self-centering..
  • Function - Assist in quick checking of holes, slots and recess up to 6 inch deep..
  • Scope of Application - Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • Advantage - The ends of both contact are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
  • Super Quality - Self centering telescoping gauge has high rigidity, good wear resistance, durable in use..
Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

  • Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
  • Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
  • carbide-tipped anvil and spindle have 0.256" measuring....
  • Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
  • Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
  • Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check Stock

ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions

  • Color coded brake pad gauge to identify thickness level ranges for brake lining inspection.
  • The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation.
  • Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red).
  • Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch).
  • Constructed out of steel with powder coat riveted together for extra strength and durability.
Check Stock

18 AWG DC Power Pigtail Cable 2.1mm x 5.5mm Barrel Plug Wire Female Connectors for CCTV Security Camera and Led Lighting Power Adapter by SIM&NAT Pack of 10

  • Ultra thick 18 gauge 12v male power pigtail cable are thicker than other 22 gauge pigtails wire, which can be used for higher current devices, the max....
  • SIM&NAT 18 gauge stranded tinned copper wire - Single strand on the micrometer is 0.008" and there are 24 strands for each cord.(Total 48 strands for....
  • end of the dc power pigtail cables are pre-tinned making them super easy to solder, which is widely used for CCTV systems, surveillance, part....
  • Outside of barrel (Blue wire) - Negative.
  • Package Included: 10 * 2.1mm x 5.5mm Female pigtail connector wire.
  • 6 months full refund without any hassle..
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • Using Brake Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, an....
Check Stock

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

  • [ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
  • [ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
  • [ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
  • [ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
  • [ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..
Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock