Top Brake Pedal Cable Replacement
BAFANG 48V 500W Front Hub Motor Electric Bike Conversion Kit for 700C Wheel Drive Engine with LCD Display (48V 17.5Ah Rear Battery and Charger)
- Two riding Model (E-bike & Pedal Assisted bicycle) for you to choose, you can choose the E-bike to enjoy a long time travel, and also exercise.
- 【Stable Drive System】 This Bafang front drive motor, which is compatible with the disc brake, has a rated power of 500W, providing ideal power for vehicles. Strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes, commuter bikes and mountain bikes..
- 【Super Cost-Efficient】 Speed up to 38-40 KMH, 470 RPM, efficiency ≥ 80%.
- Brake Levers cut off the power supply to the motor safely..
- 【Complete Accessories】 Comes with most necessary accessories. front wheel & motor, controller, brake lever or hydraulic brake sensor, thumb throttle, controller case,Bafang LCD display (optional),battery and charger(optional),extension cable, PAS (two pcs),1T4 cable,LED light (free gift).
- 【American Service Center】We have inventory in US/EU/CA/AU warehouse, 3-7 days fast delivery time. One month free return. If any QUALITY problem within one year, our North Americ....
Check StockNOWIGOT 2pcs,Red Accelerator Gas Pedal Brake No Drilling Pedal Cover Anti-Slip Performance Aluminum Alloy Foot Pads Kit Fit for for Dodge Challenger Charger Chrysler 300 2009-2021
- ☛Fitment:Gas Brake Pedal cover fits for Dodge Challenger /Dodge Charger / Chrysler 300 2009-2021.(Not fit for SRT&2016 Charger)(Before placing an order, please make sure that the photo is the same.).
- ☛High Quality:The Made of high quality aluminum alloy with black anti-slip rubber, Non-slip surface design.NOTE:The original brake pedal rubber pad needs to be removed before installation.Otherwise, the brake pedal cannot be properly installed on our products..
- ☛Safety Design:Black anti-slip rubber strip, increasing the friction between the soles and pedals, wear-proof and corrosion-proof, improve safe driving..
- ☛Easy installation:No need tools, please remove the original brake pedal rubber pad after remove, can install brake pedal pad, gas pedal cover don't need to remove. (Note: Remove the factory brake rubber padel cover to add our brake pedal product.).
- ☛Quality Guarantee:If you're not satisfied with our pedal, simply return it for a full refund in 30 days, no questions asked money back. We will reply within 24 hours and give you a satisfactory answer..
Check StockGREHUA Brake Throttle Pedals 71" Cable with Return Springs Kit for 196cc 6.5hp Road Rocket Azusa Fun Kart Radio Flyer Carter Go Kart Vintage Go Cart Racing Drift Trike Heavy Duty Parts(Silver)
- FITMENT —Fit for 196cc 6.5hp Road Rocket, Azusa Fun Kart, Carter Go Kart,Radio Flyer Kart Cart Racing Drift Trike,Vintage Type Go Kart..
- SIZE — Throttle cable total length 71" casing length 63".Brake throttle pedals total length: 5.63", width:2.12",foot pad length:2.24", width: 1.75"..
- HIGH QUALITY — Made of high quality metal material, anti-compression deformation and anti-aging,prevents corrosion and wear resistant..
- PACKAGE INCLUDED—1 x Brake Pedals,1 x Throttle Pedals,1x Throttle Cable,1 x Brake Pedal Return Spring,1 x Throttle Pedal Return Spring, 2 x Lock Nuts..
- NOTE—Built really nice for the youth go kart,It maybe a little small for adults ,please check the comparison pictures and the size of the product displayed on the picture..
Check StockBAFANG 48V 500W Rear Hub Motor Kit Electric Bicycle Conversion Kit for Bikes 700C Wheel with 850C Display
- 【Easy to Convert】 DIY rear wheel ebike conversion kit for bicycle with rear drop out size "128-148mm" flywheel is ≦9 Speeds. Easily convert your pedal bike into a motorized bike within 1-hour..
- 【Stable Drive System】This Bafang rear-drive motor, which is compatible with the disc brake, has a rated power of 500W, providing ideal power for vehicles..
- 【Complete Accessories】 Comes with all necessary accessories. rear wheel & motor, controller, brake level or brake sensor for hydraulic brake levers, thumb throttle, controller case,Bafang LCD display (optional),extension cable,PAS,1T4 cable,LED light as a free gift, battery and charger(optional).
- 【Super Cost-Efficient】Strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes, commuter bikes and mountain bikes. Speed up to 38-40 KMH, 470 RPM, efficiency ≥ 80%.
- Brake Levers cut off the power supply to the motor safely.
Check StockECCPP Brake Master Cylinder Fits 1996-2017 for Arctic Cat 1976-2017 for Argo Atv 2002-2009 for ATK 2014 ClubCar 2008-2009 Hammerhead Off-Road 2014-2017 Hisun Motors Corp USA Master Cylinder
- APPLICATION - Brake Master Cylinder for 1996-2017 for Arctic Cat, 1976-2017 for Argo Atv, 2002-2009 ATK, 2014 ClubCar, 2008-2009 Hammerhead Off-Road, 2014-2017 Hisun Motors Corp USA, 1970-2018 for Honda, 2005-2009 for Husqvarna, 2005-2010 for Hyosung, 1980-2018 for Kawasaki, 1985-2018 for Polaris.
- EXCELLENT PERFORMANCE - New castings pistons and constructed rubber seals to prevents fluid bypass..
- CONVERT PRESSURE - Convert the pressure on the brake pedal to hydraulic pressure, which means that the desired braking effect can be achieved with a gentle touch of the brake. bypass. It can convert the pressure on the brake pedal to hydraulic pressure, which means that the desired braking effect can be achieved with a gentle touch of the brake..
- RELIABLE PRODUCT - Work as original equipment, aftermarket Motorcycle Replacement Brake Master Cylinder. Durable aluminium material for long use..
- QUALITY GUARANTEE - Check part number and Amazon compatibility chart carefully before place order. We provide ONE YEAR quality guarantee..
Check StockNEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO
- Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
- Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
- It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
- Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
- Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check StockNEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO
- Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
- Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
- Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
- Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
- Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check StockVoilamart Ebike Conversion Kit 26' Front Wheel 48V 1000W Electric Bike Conversion Motor Kit with Intelligent Controller and PAS System for Road Bike
- 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed.
- Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit..
- Dual Mode Controller: Motor works under Hall effect and non-Hall effect, extend life for electric bike..
- LCD display shows battery level and pedal assistance settings.
- Brake Levers cut off the power supply to the motor safely.
- Twist throttle has battery level display.
- Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual, LCD Meter. (Note: Battery not included).
- 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required..
Check StockTEKTRO M530 Linear Pull Brake, Black
- Application: bike brakes kit,suitable for Children most bicycles,Height of break pad adjustable 20mm;See Figure 2 for detailed dimensions..
- Material: The bike brakes kit is made of high-quality aluminum alloy, and the brake cable is also made of high-quality aluminum alloy. It is durable and can be used for a long time. It is resistant to cold, heat and oxidation, and is not easily deformed. It ensures that the brakes are sensitive and suitable for most weather conditions..
- Product size: Front brake cable length: 55cm/21.65".
- Rear brake cable length: 155cm/61.02".and the bicycle brake handle is suitable for handlebars with a diameter of 2.2 cm / 0.87"..
- Easy to install: Quickly replace the old bicycle brake and tighten it with the corresponding brake fixing hole.
- pass the brake wire through the brake wire tube in turn to fix the position of the metal wire tube.
- then fix it on the bolt, install the brake pads, and adjust the distance of the brake wire , Position and length, and then fix the brake cable..
- You will get: 2 pieces bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set.
Check StockDorman 20716 Brake Pedal Pad Compatible with Select Toyota Models
- Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
- Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
- Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
- Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
Check StockVoilamart 26\ Rear Wheel Electric Bike Conversion Kit, 48V 1500W E-Bike Motor Kit with LCD Display, Built-in Programmable Controller and PAS System, 750W Power Limited for Road Bike
- 48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed.
- Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit..
- Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity..
- LCD display shows battery level and pedal assistance settings.
- Brake Levers cut off the power supply to the motor safely.
- Twist throttle has battery level display. Built-in powerful controller guarantee big current supply.
- Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Cable Ties & Plastic Coil, Wire Hub, Pedal Assist Crank Sensor, Twist Throttle, One Pair of Brake Handles, LCD Meter, Manual. (Note: Battery not included).
- 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required..
Check StockVoilamart Electric Bicycle Wheel Kit 26' Front Wheel 48V 1000W E-Bike Conversion Kit, Cycling Hub Motor with Intelligent Controller and PAS System for Road Bike
- 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed.
- Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit..
- Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity..
- Brake Levers cut off the power supply to the motor safely.
- Twist throttle has battery level display.
- Comes with all the components you need to a full conversion, including Front Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included).
- 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required..
Check Stock