Top Brake Rotor Thickness Inspection Tool

ACDelco Silver 18A2719A Front Disc Brake Rotor

  • GMC Terrain 2010-2017.Material:Cast Iron.
  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Rounded radius for added strength. Rotor Diameter-12.64 inch. Rotor Height-2.01 inch. Nominal Thickness-1.181 inch. Minimum Thickness-1.063 inch. Bolt Circle-4.724 inch. Center Hole Diameter-2.7 inch.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality.
  • For General Motors vehicles as well as most makes and models.
Check Stock

Power Stop K2163-36 Front Z36 Truck & Tow Brake Kit Carbon Fiber Ceramic Brake Pads and Drilled/Slotted Brake Rotors

  • Proprietary carbon-fiber ceramic materials enhance the strength of a typical ceramic brake pad compound to handle heavier loads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Drilled & Slotted performance rotors for maximum cooling. Minimum Rotor Thickness-1 inch. Nominal Rotor Thickness- 1.1 inch. Outside Diameter-13.2....
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant.
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...c Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
  • ✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in h....
Check Stock

Performance Machine Revel Brake Rotor 0133-1800RELS-BMP

  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Rounded radius for added strength. Minimum Thickness-1.039 inch. Nominal Thickness- 1.103 inch. Rotor Diameter-11.81 inch. Rotor Height-1.9 inch.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality.
  • For General Motors vehicles as well as most makes and models.
  • Durability – ACDelco Silve Brakes are designed to help resist corrosion and premature wear.
  • Brakes are one area in which vehicle owners simply cannot compromise. With ACDelco Brakes, they can get the peace of mind that comes with parts that are expertly engineered, manufactured to stringent tolerances, thoroughly tested and backed by the ACDelco name. Choose from our Original Equipment Service, Professional DuraStop, Advantage and Specialty Series to meet your performance needs and budget. Trust ACDelco rotors, pads, drums and calipers to help keep you and your loved ones safe..
  • Great braking power that won’t break your wallet – that’s what you get with ACDelco Advantage Brakes. The ACDelco name means the quali....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

ACDelco Advantage 18B275A Rear Brake Drum

  • Mill-balanced for proper rotor function, no extra weights are needed.
  • resulting in smooth brake operation and noise reduction.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
Check Stock

ACDelco Advantage 18B607A Rear Brake Drum

  • Mill-balanced for proper rotor function, no extra weights are needed.
  • resulting in smooth brake operation and noise reduction.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
Check Stock

ACDelco Advantage 18B541A Rear Brake Drum

  • Mill-balanced for proper rotor function, no extra weights are needed.
  • resulting in smooth brake operation and noise reduction.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
Check Stock

ACDelco Advantage 18B540A Rear Brake Drum

  • Mill-balanced for proper rotor function, no extra weights are needed.
  • resulting in smooth brake operation and noise reduction.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

TARAZON Racing Rear Brake Rotor for Kawasaki Ninja ZX6R 600 636 1998-2017 ZX10R 2004-2015 ZX9R 98-04 ER-6N ER-6F 650R 06-14 Z1000 03-06 Ultralight Brake Disc Rotor

  • Weight 0.9 lb (original Rotor 1.2lb),Light Weight Track Racing Brake Rotor.
  • 8.7″ (220mm) outer diameter , thickness 4mm.
  • Fit Kawasaki Ninja ZX6R 600CC 636CC 98-up all model & ZX10R 04-16 & ZX9R 98-04 & ER-6N ER-6F 06-14 & Z1000 03-06.
  • Reduce 30% weight with original brake rotor.
  • High quality stainless steel material, quality assrance.
Check Stock