Top Brake System Pressure Tester

Hromee Fuel Pump and Vacuum Tester Gauge Carburetor Pressure Diagnostics Leakage Tool Kit

  • FUEL PUMP - This pressure gauge set can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components..
  • CAR VACUUM TESTER - Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)..
  • PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg.
  • Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2..
  • HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded ....
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

Stant 10047 Cooling System Pressure Tester Adapter Kit

  • Cooling system pressure tester adapter set Includes adapters needed to adapt test equipment to radiator caps and cooling systems.
  • Adapter set is for use on various vehicles, including, but not limited to: GM cars and trucks, Ford cars and trucks, select kenworth, freightliner, IHC, Navistar, Volvo and Sterling trucks.
  • Includes 1 each of the following adapters: 12015, 12026, 12029, 12032, 12033, 12042, and 12450.
  • Adapters feature metal and/or plastic Construction (depending on adapter).
  • The Stant coolant system pressure tester kit uses specially engineered testing equipment that can help determine the health of cooling system components like: radiators, caps, and Hoses.
Check Stock

Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving.
  • EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off..
  • 5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
  • USEFULL : Supports DOT3 DOT4 DOT5 brake fluid ..
  • EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.
Check Stock

Goplus 28-Piece Universal Radiator Pressure Tester, Vacuum Type Cooling System Tool Kit w/Carrying Case (Blue Case)

  • ⚒️ Color Coded Caps: Color coded radiator test caps aid with identifying which cap is needed for each application, so it’s easy for you to choose the suitable test cap for the job without messy..
  • ⚒️ Universal Use with 17 Test Caps: Equipped with 17 test caps for testing cooling systems on most domestic and import vehicles, such as VW, BMW, Ford, Opel, Porsche, Audi, etc. Working pressure is from 0 to 35 psi. It will be a good helper in your daily life..
  • ⚒️ Blow Molded Case: Equipped with a bold molded case, which keeps your kit organized, providing you a convenient way to tester. Besides, with the case, you could easily bring this radiator pressure tester set to anywhere you needed..
  • ⚒️ Easy to Use: Special design of vacuum purge and refill tool connection allows easy testing for leakage in radiator system and quick change of coolant. With this pressure tester, you could easily do the job..
  • ⚒️ 28 PCS Radiator Pressure Tester: Comes with various instruments, which help you solve any problem about radiator pressure conveniently and quickly..
Check Stock

JoyFans Coolant Pressure Tester Kit, Cooling System Coolant Vacuum Refill Kit Automotive Tools Works on Radiator Leak Test & Coolant Fill Purge Service for Cars Trucks Airlift

  • Radiator pressure tester kit performs one-stop cooling system service from leak detection to coolant filling. Professional tools and adapters are complete and suitable for most domestic and foreign vehicle models. Saves you from worries. Simple to use. Use the radiator pressure pump to pressurize the system, locate & troubleshoot leaks. Use the coolant refill tool (work with vacuum pump) to change coolant in vacuum..
  • Coolant pressure tester kit fits GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other domestic and foreign cars, trucks, airlifts, etc., while working with 20PCS dedicated adapters for one-person operating. Fits most models while working with the cone universal adapter, but 2 people are required to operate (one person holds the cone head and the other one pumps up). Manual tester pump with gauge calibrated from 0-35psi /0-2.5bar..
  • Pneumatic vacuum coolant purge refill tool gives efficient flush while feeding the system with fresh coolant under vacuum. Quick and clean technique allows no trapped air to remain. Features quick coupling design. Working range: -60~-50 cmHg (-23~-20inHg). Operate with specific adapters and universal adapter, this cooling system refill tool can fit almost all types of vehicle models, one person ....
Check Stock

JoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case

  • Quick Inspection of Fuel System: Fuel pump pressure tester kit is used to make comprehensive fuel system check and fault diagnosis on fuel supply and fuel injection pump pressure. Quick installation and easy access to pressure readings. Automotive fuel injector tester has a 1/4" SAE female brass fitting at end of the hose, can be inserted directly into the fuel pump's standard Schrader or fuel pressure test port, or installed a tee fitting on to help splice an in-line connection..
  • Safe Fuel Recovery: Fuel pressure gauge features shock-resistant rubber housing and dual color scale dial, ranging from 0-10 bar (0-140 psi) for easy and accurate work on both American and metric systems. High precision 3-1/2" gauge easily holds pressure values and has convenient pressure reset button with 16" drain hose for safe fuel recovery. 15" built-in flexible hose adapter has 300 psi W.P, can be connected to fittings for fuel pressure test..
  • Scope of Application: JoyFans fuel injection pressure tester kit covers a variety of gasoline engine cars, motorcycles, trucks, SUVs, ATVs, RVs with modern Schrader test port fuel injection systems but Bosch, CIS Jetronic, Throttle Body System on GM vehicles. Custom-made toolbox bases on the shapes and sizes of all tools to keep th....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

28-Piece Universal Radiator Pressure Tester, Vacuum Type Cooling System Tool Kit For Many Makes and Models with Carrying Case (Blue Case)

  • ⚒️Color Coded Caps: Color coded Auto radiator test caps aid with identifying which cap is needed for each application, so it?s easy for you to choose the suitable test cap for the job without messy..
  • ⚒️Universal Use with 17 Test Caps: Equipped with 17 test caps for testing cooling systems on most domestic and import vehicles, such as VW, BMW, Ford, Opel, Porsche, Audi, etc. Working pressure is from 0 to 35 psi. It will be a good helper in your daily life..
  • ⚒️Blow Molded Case: Equipped with a bold molded case, which keeps your kit organized, providing you a convenient way to tester. Besides, with the case, you could easily bring this radiator pressure tester set to anywhere you needed..
  • ⚒️Easy to Use: Special design of vacuum purge and refill tool connection allows easy testing for leakage in radiator system and quick change of coolant. With this pressure tester, you could easily do the job without leaks.
  • ⚒️28 PCS Radiator Pressure Tester: Comes with various instruments, which help you solve any problem about radiator pressure conveniently and quickly..
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
  • NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock