Top Brake Test Line

Sunsong 2203199 Brake Hydraulic Hose

  • Each brake hose is precision engineered to exact fit and includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Brake hoses exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards with a burst pressure rating of 8,700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300%.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Every brake hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing.
Check Stock

Daiwa ZLNSV1016H Zillion SV Right Hand Baitcast Reel Black

  • Light weight Soft-Touch Cork Handle Knob.
  • Line Capacity (Lb. Test / Yards)-MONO: 14/100, 16/90, J-BRAID: 30/115, 40/85.
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

JooFn Bike V Brake Noodle Cable Guide Pipe Rubber Boots Bicycle Cycling 10 Sets (30Pcs)

  • Included 10 Boots and 10 Noodles(5pcs is 90° bend, another 5pcs is 110° bend), and 10pcs brake cable caps..
  • Tube with a plastic catheter, reduce friction brake line, effectively protect the brake line, reduce brake line resistance..
Check Stock

Tektro 984 Black Rear Caliper-Lever-Cable BMX Bicycle Brake Kit

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. crew the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

BUCKLOS Mountain Bike V Brake Set for Most Bikes V-Brake Calipers with 2PC MTB Road Bicycle Universal Brakes Line Cable Housing and Brake Levers (Front and Rear) City Bike Black Durable

  • 【Complete brake replacement set】It includes a pair of V-brake brakes (and a pair of replacement brake pads), 2 general stainless steel brake lines for mountain highway vehicles (front and rear), 1 brake line protection hose and a pair of brake levers..
  • 【Sturdy and durable】V brake caliper are made of high quality alloy carbon steel, high strength, corrosion resistance, and more durable..
  • 【Quiet braking】The brake pad of V brake clamp adopts all-weather braking formula rubber, which does not damage the rim, is more wear-resistant and braking is quieter..
  • 【Brake kit size】Brake line (front 43.3 inches, rear 66.9 inches) brake line protection hose 98.4 inches, brake arm 4.9 inches, brake pad 2.2 inches, extended size, suitable for most V-brake bicycles.
  • 【Reminder】Before purchase, please carefully check whether there are V brake mounting holes on the front fork and rear fork of your bicycle.
Check Stock

Taxutor 2pcs Brake Fluid Tester Pen Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • Check the health status of DOT3, DOT4 car brake fluid, dangerous if you do not change brake fluid timely.
  • 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
  • Easy to use simply power up, dip probes into brake fluid and read results,Only takes seconds to know the results.High quality electrical conductivity mental design, super strong ABS shell, small compact size, easy to carry in pocket.
  • Operated by a LR03 AAA 1.5V battery (not included), automatic shutdown after about 15 seconds of inactivity.
  • PLEASE NOTE: Please use clean water to clean after the test, otherwise the brake fluid may corrode the test pen.
Check Stock

KAWASAKI 2008-2013 Ninja 250R / EX 250 R GALFER REAR STAINLESS STEEL BRAIDED BRAKE LINE KIT

  • Galfer Stainless Steel Braided Brake Lines – Increasing your braking power and feel is as easy as upgrading to the Galfer stainless steel brake lines. These lines will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at their maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times..
  • Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. The kits come standard with polished silver on brass fittings with matching bolts..
  • Galfer brake lines come with a lifetime warranty. Color fade, hazing, even crashing your bike will not void the warranty. Simply contact Galfer directly, supply some information, and get your new line!.
  • All brake lines will be shipped in Galfers Clear (Silver) line color pictured in the main listing photo. Black, White, Smoke, Blue, Red, Gold, Yellow, Green, and Orange line colors are also available upon request . If you would like your line kit in any of these other line colors please contact us before you....
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock

25 Ft. 3/16 OD Copper Nickel Brake Line Tubing Coil and Fitting Kit, 25 Ft of 3/16' x 25'

  • Complete Brake Line Tubing Kit- Includes 1 Pcs 25 Feet 3/16" Copper Nickel Brake Line(0.028" Wall Thickness) & 16 Fittings(10 x 3/16” (3/8-24) Inverted Tube Nuts, 2 x 3/16” (7/16-24) Inverted Tube Nuts, 2 x 3/16” (1/2-20) Inverted Tube Nuts, 2 x 3/16” (9/16-18) Inverted Tube Nuts).
  • High Quality- This brake line coil is made from Copper-Nickel alloy. It is malleable, easy to bend and not easy to break. Designed by 0.028" wall thickness and anti-rust, more flexible and durable for use..
  • Widespread Application- 3/16 brake line tubing kit for use in fuel and transmission systems. It is also widely suitable for household, industrial and commercial uses..
  • Rust and Corrosion Proof- Our copper-nickel fuel tube line last longer than standard steel tubing. It won't rust, corrosion resistance..
  • Warranty- Our brake line meets all SAE and ISO specifications. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

  • Size: The bicycle V brakes Arch size:110mm (4.3inches), Brake Pads Size:55mm(2.1inches). Suitable for most V-type brakes bike.
  • Material: This V Brakes strong and durable enough for using long time. The brake arm is made of aluminum alloy, solid and not easy to break. The brake pad is made of hard-wearing rubber, resistance to cold, heat and oxidation, not easy to deform. This Bicycle Brakes can provide great braking power on bike rim in both dry and wet conditions.
  • Install: 1. Screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Stop smoothly with less noise: the grooves of the brake pads can effectively prevent sand or stone damage the wheel rims.
  • The slightly curved design can provide better braking power and reduce stopping distance smoothly with lees noise.
  • Wide applications: This universal V-brakes compatible with both front rear wheels of MTB BMX mountain bike road bike folding bike hybrid bike. Note: you need to confirm whether the front and rear wheel of your....
Check Stock