Top Brake Vacuum Tool

EONLION 6 Liter Vacuum Oil Extractor 1.5 Gallon Fluid Change Pump Kit for Automotive and Marine

  • 【Almost any fluid】Great for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, water,etc.
  • 【Almost any tool】Ideal for automotive vehicles, water crafts, ATV/motorcycles, farm equipment, lawn equipment, household plumbing and much more....
  • 【Easy operation】This Vacuum oil extractor pump just simply pumps 10 to 20 times in a row to create a 6 liters powerful vacuum，The tool has tick....
  • 【Easy to clean】When you finish using it, you only need to add Soap and water to the pump to clean it..
  • 【BUILT TOUGH 】Built with solid materials and construction for durability, including brass hose fittings, a 6-1/2 foot reinforced 5/8 in. fill hose....
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ... on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • Specifications and Accessories: 34 oz used fluid bottle, 24 oz filler bottle. 4 Master Cylinder Reservoir Adapters: 1.25 in.-1.60 in (32 to 41mm) 1.10 in.-1.45 in (28 to 37mm) 0.95 in.-1.25 in (24 to 32mm) 0.80 in.-1.20 in (21 to 30mm). Air inlet: 2 type of 1/4''- 18 NPT.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

OEMTOOLS 27111 Disc Brake Tool Set Front and Rear Brake Piston Tool 11 Adapters Included for Use with Most Cars Forces or Rotates Pistons into Calipers

  • DISC BRAKE CALIPER TOOL SET: This disc brake caliper tool kit assists in the replacement of brake pads on most 4 wheel disc brake vehicles.
  • WORKS WITH MOST CARS: Our OEM brake caliper tool set includes 11 adapters for use on most domestic and imported cars that require clockwise rotations,....
  • QUICKLY FIT BRAKE PADS: The brake piston caliper tool set forces the pistons straight back into the brake calipers and rotates the pistons back into....
  • HEAVY DUTY DISC BRAKE PISTON TOOL: These brake caliper kits are constructed from steel for long-lasting strength and durability.
  • CONVENIENT STORAGE: This front and rear brake caliper tool set comes in a sturdy plastic case for easy storage, organization, and portability, making....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • ...r adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent hose + universal black tapered nipple..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to THORSTONE!.
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • Using Brake Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, an....
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check Stock

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • 1.【Brake Spring Tool for Safely Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • 2.【Time-Saving and Efficient Truck Air Brake Tools】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. L....
Check Stock

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

  • 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
  • Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
  • Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
  • Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
  • Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check Stock