Top Brass Fitting Manufacturer

Instapark GHN-06-25 Heavy-Duty EVA Recoil Garden Hose 25ft with 7-Pattern Spray Nozzle, Green, 25 Foot

25-ft long (when fully extended) premium EVA coiled garden water hose with brass fittings reaches far and beyond while in use and retracts to its original compact form for easy and convenient storage after use, a 7-pattern spray nozzle is included.
Lightweight, yet strong and durable and UV-resistant EVA construction and coiled design for kink-free, tangle-free, hassle-free, effortless handling, ideal for outdoors, gardens, yards, lawns, greenhouses, flowerbeds, and etc..
7-pattern (Jet, Shower, Flat, Center, Cone, Full, and Mist) pressure-adjustable spray nozzle, selectable for your specific application, such as general cleaning, gardening, car washing, and showering pets.
Anti-corrosion brass fitting attaches to any standard (GHS) garden water faucet.

Check Stock

iSpring GA1-BN Heavy Duty Non-Air Gap Drinking Faucet for Water Filtration, Reverse Osmosis Systems-Brushed Nickel-Contemporary Style High-Spout

European designer lead-free solid brass faucet. 360 degree free swivel.
Non “air gap” drinking water faucet. NOT a regular hot and cold water kitchen sink or bar sink faucet.
Ideal upgrade for undercounter water filters and reverse osmosis systems.
Brushed Nickel finish. May come with Quick Fitting or Jaco Fitting.
The front washer is pre-installed underneath the metal plate.
Backed by 3-year Manufacturer Warranty with lifetime support line 678-261-7611 from Alpharetta, GA USA.

Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..

Check Stock

Bonbo Fuel Gas Cap with Brass Hose for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators, Upgrade Extended Run (Red)

Application - This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators..
Function - As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage..
Design - The brass hose fitting has a 1/4" male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4" inside diameter..
Material - The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions..
Satisfaction Guarantee - Bonbo aims to provide best products and services for our customers. If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 30 days full refund..

Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

This Joywayus compression fitting is made of brass..
Connects to 4mm copper,brass,aluminum,or plastic tubing..
Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..

Check Stock

Expandable Garden Hose100 ft,Expandable Water Hose with 3/4 Solid Brass Connectors ,Car Wash Hose with Spray Nozzle,Extra Strength Fabric,,Leakproof Expanding Flexible Hose

Expandable Garden Hose 100ft--Expandable Hose is a new type of garden hose that expands 3 times its original length with water pressure (from 34 feet....
Flexibility-Due to the expanding nature of these garden hoses, they will never tangle, non-twisting, kink-free, a nutshell expandable garden hose....
High-Quality Brass Connectors-Expanding hoses with ¾ inch Solid Brass on/off Valve, the fitting has been considered the premium choice for durability....
Strongest expandable hose-triple-layered latex inner tubes/Exterior protective fabric tearing, they offer good flexibility with added strength when....
100% satisfaction guarantee – our garden hose with 1-year manufacturer warranty and 180 days money-back guarantee so if you have any issue with our....

Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..

Check Stock

mistcooling 250 PSI Misting Pump

...s Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..

Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 1Pcs

【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

MroMax Brass Compression Tube Fitting-8mm /0.31\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 8mm / 0.31".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

STYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools

... their valuable time to search for such a water spigot because here it is..
ALL SOLID BRASS CONSTRUCTION FOR DURABILITY - This is a heavy-duty brass quarter turn water spigot, specifically designed for rain barrels. The all brass construction including solid brass bulkhead fitting makes it a excellent pick for long-term use. Coming complete with water-proof washers and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
TWO INSTALLATION METHODS AND TOOLS NEEDED - The brass bulkhead fitting can be front mounting or back mounting. When installing, a electric drill is needed for drilling a 1-1/16 to 1-1/8 inch diameter holes, and also need a pipe wrench or adjustable wrench. This kit suits for rain barrels whi....

Check Stock