Top Brass Lathe

10 Pieces 12 inches 1/8 inch Brass Rods, Sutemribor Brass Solid Round Rod Lathe Bar Stock, 1/8 inch in Diameter, 12 inches in Length

  • √ Size : 1/8 inch in Diameter, 12 inches in Length.
  • √ Sutemribor 10 Pieces Brass Solid Round Rod Lathe Bar Stock, 1/8 inch in Diameter, 12 inches in Length.
Check Stock

VERNUOS 1/4 x 1 C360 Brass Flat Bar 12 Long Solid .230 Mill Stock

  • Features:Good material for DIY craft making.
  • Package Quantity:1pcs,1/4"（6mm） x1"（25mm） x 12"（305mm）.
  • Widely Application:Brass Flat Bar stock is perfect for a variety of Craft , milling, lathe, knife hobby raw material & custom engraved plates.
Check Stock

Brass Flat Bar Stock 3/16\(.1875\) x 1\ x 6\ C360 Extruded Rectangle Metal - 1pc

  • SMOOTH SURFACE - These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones..
  • SIZE - 30cm/12 inch in length ，3.15mm/1/8 inch in diameter.
  • FEATURES - This solid brass rod has good cutting performance and good friction reduction performance. It is a good material for lathe processing..
  • WIDE APPLICATION - This 1/8 inch brass round rod is suitable for DIY crafts, home decoration, electrical, engineering, education, static models and much more...
  • BEST SERVICE - We are committed to providing each customer with the highest standard of customer service.If you encounter any problems when using brass rods, please contact us and we will resend a new one for you or give you complete refund..
Check Stock

K&S 8163 Round Brass Rod, 3/32\ OD x 12\ Long, 1 Piece, Made in The USA

  • SMOOTH SURFACE - These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones..
  • SIZE - 30cm/12 inch in length ，3.15mm/1/8 inch in diameter.
  • FEATURES - This solid brass rod has good cutting performance and good friction reduction performance. It is a good material for lathe processing..
  • WIDE APPLICATION - This 1/8 inch brass round rod is suitable for DIY crafts, home decoration, electrical, engineering, education, static models and much more...
  • BEST SERVICE - We are committed to providing each customer with the highest standard of customer service.If you encounter any problems when using brass rods, please contact us and we will resend a new one for you or give you complete refund..
Check Stock

1/8\ x 2\ C360 Brass Flat BAR 12\ Long Solid .118\ Plate Mill Stock Solid Brass

  • Features:Good material for DIY craft making.
  • Package Quantity:1pcs,1/8"（3mm） x2"（50mm） x 12"（305mm））.
  • Widely Application:Brass Flat Bar stock is perfect for a variety of Craft , milling, lathe, knife hobby raw material & custom engraved plates..
Check Stock

2 Pieces 1/4\ x 1/2\ C360 BRASS FLAT BAR 12\ long Solid .250\ Mill Stock H02

  • Features:Good material for DIY craft making.
  • Package Quantity:1pcs,1/8"（3mm） x 1"（25mm） x 12"（305mm）.
  • Widely Application:Brass Flat Bar stock is perfect for a variety of Craft , milling, lathe, knife hobby raw material & custom engraved plates.
Check Stock

Mini Metal Lathe Machine CNC DIY Tool Benchtop Wood Lathe Woodworking for Hobby Sience Education Modelmaking, AC110V 50/60HZ (Ship from USA)

  • ...rder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood..
  • Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool..
  • Note: The machine defaults to use high speed motor. If you need a low speed motor, please contact us.This machine is a micro lathe and cannot achieve high precision. Please check the size of the accessories.Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw. If you have requirements for high precision, please consider purchasing carefully..
  • Note: Please check the wood lathe machine product description carefully, if you have more questions or don't sure about your needs, please contact with our service staff. Please do not return at will after ordering. please contact us before. thanks for your help!We have been committed to providing customers with more and well products and services..
Check Stock

4 pcs 1/4\ x 1/4\ C360 Brass Square BAR 12\ Long Solid 0.23\ Flat Mill Stock

  • Features:Good material for DIY craft making.
  • Package Quantity:1pcs,1/4"（6mm） x 1/4"（6mm） x 12"（305mm））.
  • Widely Application:Brass Flat Bar stock is perfect for a variety of Craft , milling, lathe, knife hobby raw material & custom engraved plates..
Check Stock

Brass Flat Bar 10mm Thickness x 25mm Width x 152mm Length C360 Brass Flat Bar Stock 6 Long Solid Plate Mill Stock

  • ✿ If you are a lover of DIY crafts, you should prepare this brass flat bar, because it is indeed widely used and multifunctional, you will definitely use it..
  • ✿ Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement..
  • ✿ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
  • ✿ Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✿ Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc.
Check Stock

Penn State Industries PKBHAM Brass Hammer Woodturning Project Kit

  • This is a woodturning project kit. Hardware only. A lathe is needed to make a finished handle. Blank and 1/2" forstner bit are not included..
  • Includes (1) PKBHAM Brass Hammer Woodturning Project Kit..
  • Each PKBHAM kit includes (1) Brass Head measuring 1-1/4" diameter x 2-1/2" long and weighing 1 lb 6 oz. , and (1) 3" internal connecting bolt with 1/2" x 13tpi thread..
  • This is a Turn-Between-Centers woodturning project kit..
  • Recommended minimum blank size needed to turn is 1" to 1-1/2" x 5-1/2" to 7"..
Check Stock

Hegebeck Combined Center Drills Bit Countersinks Plain Type 1/8 Inch Dia Shank High Speed Steel HSS 6542 Silver 5 Pcs

  • 【MATERIAL】-This combined center drills was made by High Speed Steel 6542,which is solid and high temperature wear resistant，not easy to break.
  • 【ADVANTAGE】-Used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
  • 【FEATURE】-Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • 【APPLICATIONS】- Work with lathe machines and most electronic drills to drill holes in steel, iron, alum, carbon steel, brass,etc.
Check Stock

C360 Brass Square Bar 25mm Thickness x 25mm Width x 130mm Length Brass Square Bar Stock 1 x 1 x 5 Solid Flat Mill Stock

  • ✿---- If you are a lover of DIY crafts, you should prepare this brass square bar, because it is indeed widely used and multifunctional, you will definitely use it..
  • ✿---- Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement..
  • ✿---- Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
  • ✿---- Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✿---- Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc..
Check Stock